PLEASE WAIT
RINSE UNIT
COFFEE READY
The powder funnel for
16. Decalcifying
Your machine has an integrated decalcifying program. It lasts approx. 50 minutes.
Please use Jura decalcifying tablets only. These are available from your Jura dealer.
Run the decalcifying program only after the machine has been switched off for at least 5 hours and has cooled down completely. The running decalcifying program must not be interrupted.
If using acidic decalcifying agents be sure to immediately re- move any splashes and drops from delicate surfaces, especi- ally natural stone and wooden surfaces, or take correspond- ing precautions.
In any case please wait until the filled decalcifying agent is used up and the tank is empty. Never top up the decalcifying agent.
Remove and empty water tank.
Replace empty water tank.
Switch off your machine by pressing ON/OFF 
key and let it cool down for approx. 5 hours.
Open cover (3).
Press key 
until you can hear an acoustic signal.
EMPTY TRAY
AGENT IN TANK
Pour 0.6 litres of water into a container and completely dis- solve the contents of a blister pack (2 tablets). Then fill the mixture into the water tank.
AGENT IN TANK / OPEN TAP / PRESS CALC
Place a sufficiently large container under the pivoting nozzle (20). Remove the
Turn selector switch for coffee (19) to the symbol 
and press key 
.
UNIT DECALCIFYING / PLEASE WAIT
When an acoustic signal is heard place a container under the
PRESS CALC
UNIT DECALCIFYING / PLEASE WAIT
CLOSE TAP
UNIT DECALCIFYING / PLEASE WAIT
Inside the machine the decalcifying agent is conducted to the drip tray.
EMPTY TRAY
FILL WATER
Place a container under the pivoting nozzle (20).
OPEN TAP
PRESS CALC
UNIT DECALCIFIYING / PLEASE WAIT
Place a container under the
PRESS CALC
UNIT DECALCIFIYING / PLEASE WAIT
CLOSE TAP
UNIT DECALCIFIYING / PLEASE WAIT
Inside the machine the water is conducted to the drip tray.
18