Cleaning the Dual Frother Plus | Jura Capresso F7/F8 manual

Steaming and frothing directly in your cappuccino cup: With practice, you can steam and froth directly in your cappuccino cup. First steam and froth the milk, then add your espresso shot.

Please note: The less fat content the milk has the more froth will be created. Skim milk will produce the most froth and will let you taste more of the coffee. 1% and 2% milk will give you less froth. Regular whole milk (3% fat) will produce the least amount of froth. You can also use soy milk.

15. CLEANING THE DUAL FROTHER PLUS

Always keep the Dual Frother Plus clean and free of milk deposits. Clean immediately after use. Hardened milk particles will make it impossible to create milk froth.

Fast cleaning:

Display shows READY. Place a cup underneath the frother

(Fig. 13) and turn the Steam/Water Selector to the water symbol. Let hot water run through the frother for about 3 seconds and then stop. This will flush out any small milk droplets.

Thorough cleaning of the Dual Frother parts:

•Remove the Dual Frother (Fig.14) from the Steam Nozzle (Fig. 15c).

Please note: The Dual Frother is tightly connected to the Steam Nozzle. First loosen the Clip-On Connector part (Fig. 14c) by turning it a few times, then push down to remove.

•Unscrew the black tip (Fig.14a) from the Clip-On Connector (Fig. 14c). You can use a coin to loosen the black tip.

•Soak all three parts in hot soapy water.

•Make sure that the two side holes and the channel of the black tip (Fig. 14a) are free of any milk deposits.

Cleaning the Steam Nozzle (Fig. 15c)

•Place a cup underneath the Steam Nozzle (the Dual Frother is off) and let a bit of hot water run through the Steam Nozzle. Tip: If the steam nozzle is blocked by hardened milk, use a needle, toothpick or paper clip and loosen up the milk deposit. Then let some hot water pass through the Steam Nozzle.

Assembly of Frother Parts

•Make sure the Steam Nozzle is screwed onto the Metal Tube (Fig. 15a) finger tight.

•Assemble the Dual Frother and make sure that the tip is screwed onto the Connector finger tight (Fig 14a, c).

•Push the black Clip-on Connector (Fig.14c) firmly into the steam nozzle (the connector should sit flush with the chrome sleeve (Fig. 15b) so that the steam nozzle is no longer visible). Please note: If the parts are not connected tightly it will not be possible to create the frothy foam on top of the milk.

16. CLEARYL WATER FILTER CARTRIDGE

The machine comes with one Water Filter Cartridge. This cartridge is specially made for use with the F7/F8.

The cartridge:

•Reduces the water hardness up to 75%.

•Removes (if present) up to 85% chlorine, up to 90% lead, up to 95% copper and up to 67% aluminum.

•Cleans the water through an upward current principle (Fig. 8) just before the brewing cycle starts, ensuring freshly filtered water every time you make coffee.

•Eliminates decalcifying. When using the water filter cartridge, you never need to decalcify your machine.

•To reorder cartridges see chapter 22 "Supplies".

15.

Impressa E8, F7/F8, F8 specifications

The Jura Capresso F8, F7/F8, and Impressa E8 are premium automatic coffee machines known for their rich functionality, innovative technology, and sleek design. Each model stands out with unique features while sharing common traits that ensure an extraordinary coffee experience.

The Jura Capresso F8 is designed for coffee enthusiasts who demand versatility in their brewing options. This model boasts an intuitive TFT display, allowing users to easily navigate through a range of coffee selections. With its built-in conical burr grinder, the F8 ensures the freshest coffee grounds are used, enhancing flavor and aroma in each cup. The Pulse Extraction Process (P.E.P.) technology optimizes extraction time for espresso, resulting in a rich and balanced flavor profile. One notable feature is the adjustable spout height, accommodating various cup sizes, from espresso to travel mugs.

On the other hand, the F7/F8 models maintain a strong reputation for reliability and performance. The F7 shares many similarities with the F8 but with a more straightforward interface. It also features the same high-quality conical burr grinder and programmable settings, allowing users to tailor their coffee strength, temperature, and size. Key technologies like the intelligent water system ensure that only filtered water is used, which is vital for delivering the best taste without impurities. Both models also include automatic milk frothing capabilities, enabling users to create lattes and cappuccinos with ease.

The Impressa E8 is renowned for its exceptional coffee quality and user-friendly design. It offers a wide variety of coffee selections, from espresso to specialty beverages, all accessible through its user-friendly interface. The E8 utilizes Jura’s innovative dual coffee spout that allows for simultaneous preparation of two espresso shots, saving time during busy mornings. The machine’s fine foam frother guarantees perfect milk froth for lattes, while the Intelligent Pre-Brew Aroma System (I.P.B.A.S.) ensures that the coffee is optimally prepped for a fuller flavor.

All three models reflect Jura’s commitment to engineering excellence, with their compact sizes fitting seamlessly into modern kitchens. Their sleek, contemporary designs add a touch of elegance, combining aesthetics with functionality. Notably, cleaning and maintenance are simplified with automatic cleaning programs and easy access to internal components, ensuring these machines remain in top condition with minimal effort.

In summary, the Jura Capresso F8, F7/F8, and Impressa E8 provide a premium coffee experience characterized by advanced brewing technologies, user-friendly interfaces, and elegant designs. Whether you’re a casual coffee drinker or a serious connoisseur, these machines cater to diverse tastes and preferences, delivering café-quality beverages from the comfort of home.