Filter Rinsing, Programming | Jura Capresso Impressa E8, F7/F8

container. Push down gently (Fig.10).

•Close the holder for the cartridge so that it engages in the water tank (Fig.11).

•Fill the water tank with fresh cold water and replace.

1.Turn machine off. Push and hold the Rinse Button until the display shows CHG FILTER / OPEN TAP.

2.Place a 20 oz. container underneath the frother.

3.Turn the Steam/Water Selector to the water symbol.

FILTER RINSING.

For the next 90 seconds the machine will push water through the filter and through the frother. Do not interrupt this process. This activates the filter. The machine will stop automatically.

4.CLOSE TAP. Turn the Water/Steam Dial back to the cup symbol.

HEATING. READY.

17. ADJUSTING THE WATER HARDNESS

Over time, heated water inside the machine leads to calcium deposit build-up, unless you use the Clearyl Water Filter. The display will remind you when it is time to perform a decalcifying cycle. The machine is set to level 2 (medium hard water). If you have harder water you need to set it to a higher level. If you have softer water you can set it to level 1. If you are not sure about the hardness of your water, ask your local water company for the "Water Hardness in Grains."

Level 1: grains 2-9 • Level 2: grains 10-19 • Level 3: grains 20-29

Level 4: grains 30+

You can also use the enclosed water hardness indicator strip to determine the water hardness:

•Insert the stick for one second into the water you want to use. Shake off any access water and wait for one minute.

•If all five fields of the test stick turn reddish, set the hardness level to 4. If four fields turn reddish, set the hardness level to 3. If three or less fields turn reddish, leave the level in position 2.

•If you use Spring Water you can set the hardness level to 1.

You can change the hardness settings as follows: 1.Push and hold the P button (Fig. 3d). FILTER –.

2.Turn the Rotary Dial until the display shows HARDNESS. 3.Push the Dial. LEVEL 2.

4.Turn the Dial to select from 1 2 3 4 –.

5.Push the Dial to confirm your selection. HARDNESS.

6. Push the P button. READY.

Important: If you choose the selection "–" the water hardness monitor is turned off and the machine will NOT remind you when it is time to decalcify. Turning off the monitor requires you to either use distilled water or the Water Filter Cartridge (chapter 16a).

18. PROGRAMMING

Please note: As long as you are in programming mode, you cannot brew coffee.

•Push and hold the P button until the display shows FILTER. Turning the Dial clockwise the following functions will appear in the display:

HARDNESS ... AROMA ... TEMP. ... TIME ... UNIT ON ...

OFF AFT. HR ... CUPS MADE ... LANGUAGE ... DISPLAY To change functions the procedure is always the same:

1.Push and hold P button until display shows FILTER.

2.Turn Dial to the function you want to change or look up.

3.Push Dial.

4.Turn Dial until desired selection is displayed.

5.Push Dial to confirm selection.

17.

Impressa E8, F7/F8, F8 specifications

The Jura Capresso F8, F7/F8, and Impressa E8 are premium automatic coffee machines known for their rich functionality, innovative technology, and sleek design. Each model stands out with unique features while sharing common traits that ensure an extraordinary coffee experience.

The Jura Capresso F8 is designed for coffee enthusiasts who demand versatility in their brewing options. This model boasts an intuitive TFT display, allowing users to easily navigate through a range of coffee selections. With its built-in conical burr grinder, the F8 ensures the freshest coffee grounds are used, enhancing flavor and aroma in each cup. The Pulse Extraction Process (P.E.P.) technology optimizes extraction time for espresso, resulting in a rich and balanced flavor profile. One notable feature is the adjustable spout height, accommodating various cup sizes, from espresso to travel mugs.

On the other hand, the F7/F8 models maintain a strong reputation for reliability and performance. The F7 shares many similarities with the F8 but with a more straightforward interface. It also features the same high-quality conical burr grinder and programmable settings, allowing users to tailor their coffee strength, temperature, and size. Key technologies like the intelligent water system ensure that only filtered water is used, which is vital for delivering the best taste without impurities. Both models also include automatic milk frothing capabilities, enabling users to create lattes and cappuccinos with ease.

The Impressa E8 is renowned for its exceptional coffee quality and user-friendly design. It offers a wide variety of coffee selections, from espresso to specialty beverages, all accessible through its user-friendly interface. The E8 utilizes Jura’s innovative dual coffee spout that allows for simultaneous preparation of two espresso shots, saving time during busy mornings. The machine’s fine foam frother guarantees perfect milk froth for lattes, while the Intelligent Pre-Brew Aroma System (I.P.B.A.S.) ensures that the coffee is optimally prepped for a fuller flavor.

All three models reflect Jura’s commitment to engineering excellence, with their compact sizes fitting seamlessly into modern kitchens. Their sleek, contemporary designs add a touch of elegance, combining aesthetics with functionality. Notably, cleaning and maintenance are simplified with automatic cleaning programs and easy access to internal components, ensuring these machines remain in top condition with minimal effort.

In summary, the Jura Capresso F8, F7/F8, and Impressa E8 provide a premium coffee experience characterized by advanced brewing technologies, user-friendly interfaces, and elegant designs. Whether you’re a casual coffee drinker or a serious connoisseur, these machines cater to diverse tastes and preferences, delivering café-quality beverages from the comfort of home.