Jura Capresso F7/F8, Impressa E8 warranty Empty Tray, 20c. Decalcifying Procedure

Page 21

below within the next few days. Please use one white cleaning tablet (enclosed). The machine comes with a pack of 2 tablets. To re-order cleaning tablets see chapter 22.

Important: Once the cleaning program has started do not interrupt the procedure.

1.Make sure the machine is on and the water tank is full. 2.Push the Rinse button. The display shows EMPTY TRAY. 3.Remove and empty the drawer and used coffee container and

replace complete assembly (Fig. 21) TRAY MISSING.

Important: Even if the drawer and the used coffee container are empty, you still need to remove the drawer for approx. 20 seconds and then replace it. The display shows PRESS RINSE.

4.Place a 12 oz. container under the coffee spouts. 5.Push the Rinse button. The display shows CLEANING.

After a moment the display shows ADD TABLET.

6.Open the ground coffee lid and drop in one white cleaning tablet (Fig. 22)and close lid. PRESS RINSE. The F7/F8 comes with two tablets. To order more tablets see chapter 22.

7.Push the Rinse button. The display shows CLEANING. The cleaning program will dispense hot foamy water in intervals through the coffee spouts.

8.When finished, the display shows EMPTY TRAY.

9.Lift and remove the drawer. Empty the used coffee container and drawer and replace. The display shows READY indicating the machine is now ready to brew coffee again.

Attention: You can run a tablet cleaning cycle at anytime even if the machine does not prompt you,

• READY. Push and hold the Rinse button until display shows

EMPTY TRAY.

• Continue with step 3 above.

20c. DECALCIFYING PROCEDURE

The machine has an integrated decalcifying program. When the display shows DECALCIFY / READY it is time to decalcify the machine. You can still make coffee. However, it is highly recom- mended that you decalcify the machine within the next 3 to 4 days. Please note: If you use the Clearyl water cartridge and the display shows DECALCIFY / READY, then your cartridge function is not activated. Follow the instructions in chapter 16a to program the Clearyl Cartridge function.

Important: The decalcifying program must not be interrupted.

DECALCIFYING AGENT: Only use our special decalcifying tablets. For supplies see chapter 22.

CAUTION: Never use vinegar or any other decalcifying agent. This might damage internal parts of the machine.

1.Push the Rinse button. The display shows EMPTY TRAY.

2.Remove and empty the drawer and used coffee container and replace complete assembly (Fig. 21).

Important: Even if the drawer and the used coffee container are empty, you still need to remove the tray for approx. 20 seconds and then replace it. The display shows SOLVENT IN TANK / OPEN TAP.

3.Make sure the water tank is empty. Completely dissolve three of the white square tablets in 16 oz. of water and pour this mixture into the water tank.

4.Replace water tank. Place a large container (at least 20 oz.) underneath the frother.

21.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Impressa F7/F8 Important Safeguards Jura-Capresso LLC Customer ServicePage Ready Dual Frother Plus Metal Tube Chrome Sleeve Steam Nozzle Table of Contents Or Email us at contact@capresso.com Product Registration3b. Different Coffee Drinks PLEASE, DON’T... or you void your warranty protection3c. Coffee Facts PLEASE, doPreparing the Machine for the First Time Factory SettingsAdding Coffee Beans Adjusting the GrinderDaily Preparation ON/OFF Button Heating Rinse ReadyUsing PRE-GROUND Coffee Using HOT WaterSelect CUP Button Ready Heating Steam Ready 60 SEC Close TAP Heating and Frothing MilkClearyl Water Filter Cartridge Cleaning the Dual Frother PlusYou must activate the cartridge as follows 16a. Installing & Activating the Clearyl Water CartridgeHEATING. Ready Important Do not let the filter dry outFilter Rinsing Adjusting the Water HardnessProgramming Hardness ... Aroma ... TEMP. ... Time ... Unit on18c. Setting the Time and Unit on 18b. Temperature18a. Aroma 18d. Auto SHUT-OFFCare and Maintenance Automatic Cleaning Cycles 20a. Rinsing 19e. General Cleaning Instructions20b. Cleaning with Special Tablet 19d. Stones and BeansEmpty Tray 20c. Decalcifying ProcedureTips for Better Coffee Height adjustable coffee-spout Supplies and AccessoriesFill Water Troubleshooting All supplies are available throughFrothxpress System Grinder Makes AN Extremely Loud Noise no Beans are Ground Limited WarrantyDrawer DOESN’T Pull OUT or Display Shows Malfunction Other limitations and exclusions

Impressa E8, F7/F8, F8 specifications

The Jura Capresso F8, F7/F8, and Impressa E8 are premium automatic coffee machines known for their rich functionality, innovative technology, and sleek design. Each model stands out with unique features while sharing common traits that ensure an extraordinary coffee experience.

The Jura Capresso F8 is designed for coffee enthusiasts who demand versatility in their brewing options. This model boasts an intuitive TFT display, allowing users to easily navigate through a range of coffee selections. With its built-in conical burr grinder, the F8 ensures the freshest coffee grounds are used, enhancing flavor and aroma in each cup. The Pulse Extraction Process (P.E.P.) technology optimizes extraction time for espresso, resulting in a rich and balanced flavor profile. One notable feature is the adjustable spout height, accommodating various cup sizes, from espresso to travel mugs.

On the other hand, the F7/F8 models maintain a strong reputation for reliability and performance. The F7 shares many similarities with the F8 but with a more straightforward interface. It also features the same high-quality conical burr grinder and programmable settings, allowing users to tailor their coffee strength, temperature, and size. Key technologies like the intelligent water system ensure that only filtered water is used, which is vital for delivering the best taste without impurities. Both models also include automatic milk frothing capabilities, enabling users to create lattes and cappuccinos with ease.

The Impressa E8 is renowned for its exceptional coffee quality and user-friendly design. It offers a wide variety of coffee selections, from espresso to specialty beverages, all accessible through its user-friendly interface. The E8 utilizes Jura’s innovative dual coffee spout that allows for simultaneous preparation of two espresso shots, saving time during busy mornings. The machine’s fine foam frother guarantees perfect milk froth for lattes, while the Intelligent Pre-Brew Aroma System (I.P.B.A.S.) ensures that the coffee is optimally prepped for a fuller flavor.

All three models reflect Jura’s commitment to engineering excellence, with their compact sizes fitting seamlessly into modern kitchens. Their sleek, contemporary designs add a touch of elegance, combining aesthetics with functionality. Notably, cleaning and maintenance are simplified with automatic cleaning programs and easy access to internal components, ensuring these machines remain in top condition with minimal effort.

In summary, the Jura Capresso F8, F7/F8, and Impressa E8 provide a premium coffee experience characterized by advanced brewing technologies, user-friendly interfaces, and elegant designs. Whether you’re a casual coffee drinker or a serious connoisseur, these machines cater to diverse tastes and preferences, delivering café-quality beverages from the comfort of home.
Top Page Image Contents