Fill beans, Removing foreign objects | Jura Capresso IMPRESSA X7

16.7 Fill beans

: FILL COFFEE BEANS

Fill with beans as described in Chapter 3.4.

The display FILL COFFEE BEANS goes off after a draw-off of coffee.

We recommend that you clean the bean container out with a dry cloth from time to time before filling. For this, switch the machine off.

16.8 Removing foreign objects

Switch your machine off with the ON/OFF operating switch.

Remove the plug from the power socket.

Open the hinged door on the reverse of the machine (Fig. 5).

Press the slides downwards (Fig. 6) and remove the bean con- tainer.

Remove any beans with a vacuum cleaner.

Position the spanner (Fig. 7).

Turn the spanner in an anti-clockwise direction until the foreign object becomes loose.

Remove remaining powder with a vacuum cleaner.

Now replace the bean container and pull the slides to the front before closing the door. (Fig. 6).

16.9 Clean machine

: CLEANING NECESSARY

After 220 draw-offs or 180 rinsings, the machine has to be cleaned. You can continue to draw off coffee and hot water/steam. We re- commend that you clean the machine (Chapter 19) within the next few days.

Carry out a cleaning (Chapter 19).

16.10 Machine scaled

: DECALCIFYING NECESSARY

The machine recognises the necessity of de-scaling. You can con- tinue to draw off coffee or hot water/steam. We recommend that you carry out the de-scaling (Chapter 20) within the next few days.

16.11 Clean contacts

: EMPTY DRIP TRAY / CLEAN CONTACTS

The de-scaling residue in the area of the contacts must be removed. Please proceed as follows:

Rinse the contact fasteners in trough (B) (Fig. 8) as well as the contacts (A) with hot water and washing-up liquid. Then ad- ditionally clean the contact fasteners in trough (B) with a brush.

16.12 General cleaning instructions

Never use abrasive articles or corrosive chemicals to clean your machine.

Wipe off the inside and outside of the casing with a soft, damp cloth.

Clean the pivoting nozzle after every use.

After heating milk, draw off a little hot water, in order to clean the pivoting nozzle from the inside.

The water tank must be rinsed and filled with fresh water every day.

If you see any visible scaling in the water tank, you can remove it with a customary de-scaling agent.

Remove the water tank in order to clean it.

17. Cappuccino cleaning

Carry out this cleaning every day.

Once the cleaning sequence has started, it must not be interrupted. It takes about 5 min.

Switch the machine on with the ON/OFF switch.

Press the key until an acoustic signal is heard.

: SELECT

CLEANING – +

Press the key + .

: CAPPUCCINO CLEANING

Press the key again.

: CLEANER FOR CAPPUCCINO /

PRESS CLEANING	E

Place a vessel of at least 0.5 l under the coffee spout (4).

Put about 25 cl of water into a vessel and add the cleaner. You can see the amount of cleaner on the label or the sheet accompa- nying the product in question. Immerse the cappuccino tube into it.

Press the key .

: CAPPUCCINO CLEANING / PLEASE WAIT

An acoustic signal is heard.

: WATER FOR CAPPUCCINO / PRESS CLEAN

Fill a vessel with fresh water and immerse the cappuccino tube into it.

Press the key .

: CAPPUCCINO CLEANING / PLEASE WAIT

18.Combined cleaning

Once the cleaning sequence has started, it must not be interrupted. It takes about 20 min.

Switch the machine on with the ON/OFF switch.

Press the key until an acoustic signal is heard.

: SELECT

CLEANING – +

Press the key + 2x.

: ENTIRE CLEANING

Press the key .

: EMPTY DRAWER / INSERT TABLET (Fig. 10) /

CLEANER FOR CAPPUCCINO

Place a sufficiently large vessel under the coffee spout .

Put about 25 cl of water into a vessel and add the cleaner. You can see the amount of cleaner on the label or the sheet accompa- nying the product in question. Immerse the cappuccino tube into it.

Press the key .