Switching the Impressa off, Draw OFF Steam

Dip the 2-stage frothing jet (24) into the milk and press the key.

DRAW OFF STEAM

When you have frothed the milk to your liking, pres the key again.

11.3Attaching the Professional-Cappuccino Frother to the IMPRESSA

Remove the 2-stage frothing jet (24).

Now attach the Professional-Cappuccino Frother (Fig. 6).

Press the hose into one side of the opening behind the dial (Fig. 7).

11.4Making cappuccino and hot milk with the Professional-Cappuccino Frother

Fill the milk pitcher with milk or dip the milk hose directly into the milk.

Place a cup under the Professional-Cappuccino Frother.

Press the Steam Portion key .

STEAM PORTION

The machine will froth or heat milk according to the time you programmed (see “Programming the steam portion”, Chapter 13.8)

For cappuccino, turn the selector switch (1, Fig. 7) to (2).

For hot milk, turn the selector switch (1, Fig. 7) to (3).

Now place the cup with the cappuccino froth or hot milk under the coffee spout (18) and make a coffee of your choice.

11.5Cleaning the Professional-Cappuccino Frother and jet

After heating or frothing milk, you should clean the Profes- sional-Cappuccino Frother. We recommend cleaning it on a

			daily basis.	E
			daily basis.
			Your IMPRESSA will not prompt you to clean the Profes-


			sional-Cappuccino Frother.


			The Professional-Cappuccino Frother and the Easy-Cappuc-
			The Professional-Cappuccino Frother and the Easy-Cappuc-
			cino Frother are best cleaned using the JURA Auto-Cappuc-
			cino Frother are best cleaned using the JURA Auto-Cappuc-
			cino cleaner. Please contact an authorized dealer. We recom-
			mend cleaning these devices daily.

Fill water into a receptacle and dip the milk hose into it.

Draw steam until the water / steam from the Frother runs clear.

We also recommend regularly disassembling the Frother and rinsing it under running water.

Remove the Professional-Cappuccino Frother from the IMPRES- SA and take it apart as shown in Fig. 8.

Thoroughly rinse all the parts of the Professional-Cappuccino Frother under running water.

Re-assemble the Professional-Cappuccino Frother and attach it to your IMPRESSA.

12. Switching the IMPRESSA off

Switching the IMPRESSA off causes the coffee spout to be rinsed first. Therefore, please make sure to place a suitable receptacle un- der the coffee spout (18).

SELECT PRODUCT

Switch the IMPRESSA off with the ON / OFF key (11).