Jura Capresso 13429 manual Programming the filter, Maintenance

Page 14

 MACHINE RINSING

The coffee spout (18) is rinsed.

13. Programming

The IMPRESSA leaves the factory with a number of default settings that allow you to make coffee without having to pro- gram the machine first. You can, however, adjust various parameters to make the coffee suit your personal taste.

The following parameters can be adjusted:

Filter

Water hardness

Rinse

Powder quantity

Water quantity

Temperature

Water portion

Steam portion

Economy mode

Time

Automatic switch-on time

Automatic switch-off time

Language

Display

Information (to be viewed only)

13.1 Programming the filter

Please refer to Chapter 5 “Using the CLARIS plus filter cartridge”.

13.3 Maintenance

You can activate the following maintenance functions from this program item:

RINSE MACHINE, CLEAN MACHINE, DE-SCALE MACHINE, CHANGE FILTER.

“DE-SCALE machine” is not displayed if you are using a CLARIS plus filter and the filter is set to “YES”.

“CHANGE FILTER” is not displayed if you are not using a CLARIS plus filter and the filter is set to “NO”.

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 RINSE

Now press the Rotary Switch (4) to start programming.

 RINSE

MACHINE

Turn the Rotary Switch (4) until the required maintenance func- tion (for selection see above) is displayed. Press the Rotary Switch (4) to activate the function.

The Maintenance menu closes automatically after 5 seconds if no function is selected.

13.2Programming your machine to the correct water hardness (only with FILTER NO)

Please refer to Chapter 4 “Adjusting your machine to the water hardness”.

13.4Programming the amount of powder for coffee and espresso

You can adjust the amount of powder for coffee and espresso separately.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Impressa Xs90 / Xs95 Display serves as information = Note = Important Page Description of the machine Contents Before you begin Safety information 1.1 WarningsPrecautions Checking electrical fuseFilling the water tank Adjusting the grinding gearPower switch Filling the bean tankAdjusting your machine to the water hardness Cup illuminationChanging the filter Using a Claris plus filter cartridgeInstalling the filter Making coffee with pre-ground coffee powder Rinsing the machineMaking coffee Espresso, 2 espressos, 1 coffee, 2 coffees  Machine Rinsing  Select ProductMaking coffee à la carte Making hot waterFrothing one portion of milk with the 2-stage frothing jet Drawing off steamFrothing milk Frothing milk With the 2-stage frothing jet Draw OFF Steam Cleaning the Professional-Cappuccino Frother and jetSwitching the Impressa off Programming the filter MaintenanceProgramming Programming the amount of powder for coffee and espresso Powder Quantity  Water QuantityProgramming the steam portion  TemperatureProgramming the water portion  PortionEconomy Economy mode Economy Mode  Economy Time Setting the timeProgramming the automatic switch-on time  Unit on OFF After HRS Programming the automatic switch-off timeProgramming the language OFF AfterProgramming the display InformationLocking/releasing the drawing of coffee à la carte Maintenance Filling the water tankLock functions Locking the programming functionDrip tray missing Emptying the coffee groundsEmptying the drip tray Removing stones from the grinding gearEmptying the system Prompt to run cleaning cyclePrompt to decalcify General cleaning instructions CleaningDecalcifying  Fill Water Tank Rinse Water Tank DisposalTips for perfect coffee  Press SteamProblems Problem Cause RemedyTechnical data Legal informationArt 4/07
Top Page Image Contents