Jura Capresso 13429 manual Lock functions, Locking/releasing the drawing of coffee à la carte

Page 21

Now press the Rotary Switch (4) to access the Information menu.

 TOTAL

1000 (example)

Turn the Rotary Switch (4) to display how often you made espresso, 2 espressos, 1 coffee, 2 coffees, coffee à la carte, pow- der, water and steam.

Finally, the number of cleaning and decalcifying cycles and filter changes are displayed.

To exit the information program, press the Rotary Switch (4).

 INFO

Now turn the Rotary Switch (4) until the following message is displayed:

 EXIT

Now press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

14. Lock functions

If you install your IMPRESSA in a self-service area, you may wish to protect certain settings through a combination of buttons. You can therefore lock the programming function and disable the drawing of coffee à la carte.

14.1Locking/releasing the drawing of coffee à la carte

Switch your machine off by pressing the ON/OFF button .

Open the programming door (3)

Hold the Rotary Switch and the selection button for pre-ground coffee pressed down at the same time and wait until STOP appears in the display.

The coffee à la carte button is now locked and can no longer be used to alter the amount of powder or water for individual beverages. To release the coffee à la carte button again, you should proceed as follows:

 Switch your machine off by pressing the ON/OFF button .

E

 Open the programming door (3)

 Hold the Rotary Switch and the selection button for pre-ground coffee pressed down at the same time and wait until OK appears in the display.

14.2 Locking the programming function

Switch your machine off by pressing the ON/OFF button .

Open the programming door (3)

Hold the Rotary Switch and the coffee à la carte draw-off button pressed down at the same time and wait until STOP appears in the display.

The Rotary Switch can no longer be used to gain access to the Programming mode. To release Programming mode again, you should proceed as follows:

Switch your machine off by pressing the ON/OFF button .

Open the programming door (3)

Hold the Rotary Switch and the coffee à la carte draw-off button pressed down at the same time and wait until OK appears in the display.

15. Maintenance

15.1 Filling the water tank

 FILL

WATER TANK

21

Image 21
Contents Impressa Xs90 / Xs95 Display serves as information = Note = Important Page Description of the machine Contents Precautions Safety information 1.1 WarningsBefore you begin Checking electrical fusePower switch Adjusting the grinding gearFilling the water tank Filling the bean tankCup illumination Adjusting your machine to the water hardnessUsing a Claris plus filter cartridge Installing the filterChanging the filter Making coffee Espresso, 2 espressos, 1 coffee, 2 coffees Rinsing the machineMaking coffee with pre-ground coffee powder  Machine Rinsing  Select ProductMaking hot water Making coffee à la carteFrothing milk Drawing off steamFrothing one portion of milk with the 2-stage frothing jet Frothing milk With the 2-stage frothing jetCleaning the Professional-Cappuccino Frother and jet Switching the Impressa off Draw OFF Steam Programming MaintenanceProgramming the filter Programming the amount of powder for coffee and espresso Water Quantity  Powder QuantityProgramming the water portion  TemperatureProgramming the steam portion  Portion Economy Mode Economy modeEconomy  EconomyProgramming the automatic switch-on time Setting the time Time  Unit onProgramming the language Programming the automatic switch-off time OFF After HRS OFF AfterInformation Programming the displayLock functions Maintenance Filling the water tankLocking/releasing the drawing of coffee à la carte Locking the programming functionEmptying the drip tray Emptying the coffee groundsDrip tray missing Removing stones from the grinding gearPrompt to run cleaning cycle Prompt to decalcifyEmptying the system Cleaning General cleaning instructionsDecalcifying Tips for perfect coffee Disposal Fill Water Tank Rinse Water Tank  Press SteamProblem Cause Remedy ProblemsLegal information Technical dataArt 4/07