Jura Capresso 13429 manual Economy mode,  Economy Mode

Page 17

 FILTER NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 STEAM

PORTION

Press the Rotary Switch (4) to activate the program item.

 PORTION

20 SEC (example)

Turn the Rotary Switch (4) to modify the steam portion and then confirm your setting by pressing the Rotary Switch (4).

 STEAM

PORTION

Turn the Rotary Switch (4) until the following message is dis- played:

 EXIT

Press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

13.9 Economy mode

You can set your machine to various power saving modes.

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 ECONOMY

MODE –

Now press the Rotary Switch (4) to start programming.

 ECONOMY

 

MODE -

 

 Now turn the Rotary Switch (4) until the required economy

E

 

mode is displayed.



ECONOMY

MODE 2 (example)

Confirm the selected setting by pressing the Rotary Switch (4).

 ECONOMY

MODE 2 (example)

Now turn the Rotary Switch (4) until the following message is displayed:

 EXIT

Now press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

Economy mode –

Selecting this level puts the IMPRESSA in constant stand-by mode.

This setting allows you to make any of the products without having to wait for the machine to heat up.

Select this setting if you want to make a lot of coffees with hot or frothed milk and do not want to wait for the machine to heat up first.

Economy mode 1

Selecting this level puts the IMPRESSA in constant stand-by mode for making coffee. The machine is heated up separately if you need steam for hot or frothed milk.

17

Image 17
Contents Impressa Xs90 / Xs95 Display serves as information = Note = Important Page Description of the machine Contents Precautions Safety information 1.1 WarningsBefore you begin Checking electrical fusePower switch Adjusting the grinding gearFilling the water tank Filling the bean tankCup illumination Adjusting your machine to the water hardnessChanging the filter Using a Claris plus filter cartridgeInstalling the filter Making coffee Espresso, 2 espressos, 1 coffee, 2 coffees Rinsing the machineMaking coffee with pre-ground coffee powder  Machine Rinsing  Select ProductMaking hot water Making coffee à la carteFrothing milk Drawing off steamFrothing one portion of milk with the 2-stage frothing jet Frothing milk With the 2-stage frothing jet Draw OFF Steam Cleaning the Professional-Cappuccino Frother and jetSwitching the Impressa off Programming MaintenanceProgramming the filter Programming the amount of powder for coffee and espresso Water Quantity  Powder QuantityProgramming the water portion  TemperatureProgramming the steam portion  Portion Economy Mode Economy modeEconomy  EconomyProgramming the automatic switch-on time Setting the time Time  Unit onProgramming the language Programming the automatic switch-off time OFF After HRS OFF AfterInformation Programming the displayLock functions Maintenance Filling the water tankLocking/releasing the drawing of coffee à la carte Locking the programming functionEmptying the drip tray Emptying the coffee groundsDrip tray missing Removing stones from the grinding gearEmptying the system Prompt to run cleaning cyclePrompt to decalcify Cleaning General cleaning instructionsDecalcifying Tips for perfect coffee Disposal Fill Water Tank Rinse Water Tank  Press SteamProblem Cause Remedy ProblemsLegal information Technical dataArt 4/07