Installation

NOTE: This microwave oven is not designed for built-in use.

1.Make sure all packing materials have been removed from the oven. Visual check after unpacking Check the oven for any damages, such as misaligned door. damaged gaskets around door or dents inside the oven cavity or on the door. If there is any damage. do not operate the oven until it has been checked by an authorized service personnel and any repairs made, if necessary.

2.The oven should be placed on a flat and stable counter, table or cart.

3.The oven should be placed away from high temperature and steam.

4.Exhaust vents are provided on the back of the oven for proper cooling and airflow in the cavity. Never allow anything to cover the air vents and there should be at least 2" (5cm) clearance at the.air vents to permit adequate air circulation.

5.Place turntable inside the oven cavity and be sure that it is seated properly on the roller ring.

6.Read through all the precautions and the operating instructions before operating the oven.

7.Diagram for installing the turntable.

Glass tray

Ring

Turntable shaft

Cavity