Electrical connection
FOR THE REPBLIC OF IRELAND ONLY
The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is also used, the
For replacement fuse covers please consult your guarantee card for the address of your local Service Centre.
Please state the colour of the plug insert.
WARNING!
THIS APPLIANCE MUST BE EARTHED
Electrical connection
FOR GREAT BRITAIN ONLY
Prior to connecting, check that the voltage on the rating plate corresponds to the voltage in your home. Then follow the appropriate procedure for wiring.
The earthing of this appliance is compulsory by law. The manufacturer will accept no responsibility for injury to persons or damage to objects arising from the
WARNING!
THIS APPLIANCE MUST BE EARTHED
MOULDED PLUGS For Great Britain only
This appliance is fitted with a B.S. 1363A 13 Amp fused plug. To change a fuse in this type of plug proceed as follows:
1.Remove the fuse cover (A) and the fuse (B).
2.Fit a replacement fuse which should be a BS 1362 13A.A.S.T.A. item (B).
Important:
*The fuse cover must be refitted when changing a fuse.
*In the event of a fuse cover being misplaced, the plug must not be used until a correct replacement is fitted.
*Please ensure that the replacement fuse cover is of the same colour as the insert or, as the colour embossed in
words on the base of the plug.
For replacement fuse covers please contact your local electrical store.
Please state the colour of the plug insert.
If the fitted plug is not suitable for your socket outlets, it must be disposed of in order to avoid a shock hazard.
A suitable alternative plug should then be fitted to the cable. A suitable plug should be fitted to the mains cable. If a 13 Amp plug is to be fitted, then a 13 Amp fuse should be used in the plug.
Important:
The wires of the mains lead fitted to this appliance are coloured in accordance with the following code:
GREEN AND YELLOW - EARTH BLUE - NEUTRAL
BROWN - LIVE
As the colours of the wires in the mains lead
fitted to this appliance may not correspond with the coloured markings identifying the terminals in the plug, proceed as follows:
The wire which is coloured GREEN AND YELLOW must be connected to the terminal in the plug which is marked with the letter "E" or by the earth symbol 
or coloured GREEN or
GREEN AND YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter "N" or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter "L" or coloured RED.
If the terminals in the plug are unmarked or you are in any doubt as to the correct connections, consult a qualified electrician.
N.B. We recommend the use of a good quality plug.
10