Tribest SD-P9000GP specification

3)Load the trays into the chosen half of Sedona according to which fan with heating coil is selected.

NOTE:

•The default setting of Sedona is whole (upper half + lower half).

•Since Sedona Combo is equipped with two independent fans with heating coils, the Sedona Combo can be used to dehydrate food in the upper or lower half of the unit when divided.

•The Sedona Combo will not remember your tray setting, and it will go back to whole when you turn the Sedona Combo off.

•We recommend using the upper half only when drying up to 4 trays.

8.MODE button allows you to choose one of three settings. The lights to the right of the MODE button indicate which mode is activated.

•When the top RED light is lit, only FAST mode is activated.

•When the bottom GREEN light is lit, only RAW mode is activated.

•When both the top RED and bottom GREEN light are lit, the Two-Stage Sequential

Temperature-Timer is activated (both FAST and RAW mode are activated).

The three settings:

1)FAST mode: The average internal temperature levels will be maintained at the indicated temperature. As the heating element cycles on and off, internal temperature will rise and fall. The indicated temperature is the average temperature maintained by the Sedona Combo. (See chart on page 13).

2)RAW mode: Internal temperature will never go above the indicated temperature. Indicated temperature is not the average temperature, indicated temperature is the maximum temperature that the machine will go up to. This is useful for preserving certain vital nutrients that can degrade at high temperatures. (See chart on page 13).

3)COMBO mode: Uses the Two-Stage Sequential Temperature-Timer to set the two temperature/time settings. It starts at a higher temperature for a set time (FAST mode) then automatically drops down to a lower temperature for a set amount of time.

•FAST mode: The first temperature setting and is set at a higher temperature to encourage more initial dehydrating, less spoiling/fermenting of foods.

•RAW mode: The second temperature setting and is set at lower temperatures for longer times.

9.START/PAUSE button is to restart or pause operation. NOTE:

• While Tribest Sedona Combo is in operation, if you open the door, the power supply to both the heating coil and the fan will be cut-off. Tribest Sedona Combo will automatically restart as soon as the door is closed.

• You will hear a buzzing sound when the buttons are pressed, when the door is opened, and when the assigned time is over.

• To change the temperature and/or operation hours while the Sedona Combo is running,