SmartBridges sB3412 System Configuration Page Items Descriptions System Name, System Description

i n t e l l i g e n t w i r e l e s s p l a t f o r m

The following page summarizes the page contents of the System Configuration page.

Table 8-1 System Configuration Page Items

Page Item	Descriptions.
System Name	Displays name of aCNPT unit
	Allows user to change aCNPT unit name
System Description	Displays description of aCNPT unit
	Allows user to change aCNPT unit description
SNMP Security	Access the SNMP security settings
Reset	Reset device
Reset To Factory	Reset device to factory defaults
Defaults
Delayed Reset	Schedule a reset
NTP Server	NTP server setup, as well as NTP time if server is setup
Software Version	Display the installed firmware version
Radio Firmware	Display the installed radio firmware version
Version
Edit Configuration	Provide links to edit IP, radio, configurations
Ethernet MTU Size	Set the Ethernet MTU Size
Syslog server IP	Display the current message Syslog server IP Address.
Address	User can change the IP address.
SNMP Trap IP	Display the current SNMP trap IP address.
	User can change the IP address.
Log Level	Display the current Log Level
	Suspends/Enables the radio defenders.
	If the WatchGuard is suspended, the defenders will stop for 2 hours and start
	again thereafter.
WatchGuard	If the WatchGuard is enabled the radio defender’s will start immediately.
	Note: The Radio Defenders will monitor the Wireless Association Status
	(automatically) and traffic and take corrective action if needed.
LED Control	Displays the current LED status.
	The user can change the LED status to on/off
Current	Display the current operational mode.
Operational mode	User can change the current operational mode.

airClient™ Nexus PRO TOTAL User Guide Page 61 of 78