Keating Of Chicago 0107 IV Maintenance, Electronic Timer Operating Instructions, Warranty Repairs

Page 12

B.How to program the “Keating” Electronic Timer

λ The Keating Electronic Timer is programmable to four different timer ranges with two different alarm modes for each time range.

λ The timers are shipped from the factory preset to program 5: Minutes : seconds (00:01 to 59:59) with continuous alarm

λ To program another time range or alarm mode perform the following steps:

1. Turn off the power

2. Press the “down arrow “ button while turning the power on.

3. Release the button after the display turns on.

4. A number from 0 to 7 will appear. This number corresponds to:

0 = Seconds (000.1 to 999.9) 5 second alarm

1 = Minutes : Seconds (00:01 to 59:59) 5 second alarm

2 = Seconds (0001 to 9999) 5 second alarm

3 = Hours : Minutes (00:01 to 23:59) 5 second alarm

4 = Seconds (000.1 to 999.9) continuous alarm

5 = Minutes : Seconds (00:01 to 59:59) continuous alarm

6 = Seconds (0001 to 9999) continuous alarm

7 = Hours : Minutes (00:01 to 23:59) continuous alarm

5. Use the “down arrow “ button to select the desired time range.

6. Turn off the power.

7. Wait 2 seconds.

8. Turn on the power. (The timer will remain in the new time range until programmed.) The electronic timers, used on 18" and above Basket-Lift models, provide a clearly visible and accurate display and are very easy to use. One knob sets the time and one button controls all operations. The display can show cooking or clock time.

9

ELECTRONIC TIMER

OPERATING INSTRUCTIONS

PART # 056921

DIGITAL TIMERS

The electronic timers, standard on pasta cookers, provide a clearly visible and accurate display and are very easy to use.

PROGRAMMING

To program the timers, the unit must be in the idle mode. Press and hold the set button for approximately two seconds. The display will show “SEt”. Press the button for the channel to be programmed. The display will show the current setting for that channel. Use the up or down button to increment or decrement the setting. When the setting is correct, press and hold the set button again for approximately two seconds. The display will show "StO" for approximately two seconds and the timer will return to normal operation. Repeat the process as necessary for the other timers.

OPERATING LOGIC

When the timer is powered up, the display will show the time setting for the channel that was operated last and the relay output contacts will be open. To start a cycle, press the desired channel button (1-3). The display will begin to countdown from the preset time setting and the relay output contacts will close. During the countdown the colon will flash at a one-second rate. When the countdown has reached "00:00" the relay output contacts will open, the display will flash, and the audible alarm will sound. To cancel the audible alarm, press any button.

PAUSE FEATURE

To pause a cycle in progress, press any button. The relay output contacts will open, the display will flash, and the countdown will pause. To resume the countdown, press any button. The display will resume the normal countdown and the relay output contacts will close.

CANCELING A CYCLE

To cancel a cycle in progress press and hold any button for approximately two seconds. The relay output contacts will open and the display will show the time setting for the channel last used.

IV MAINTENANCE

WARRANTY REPAIRS

Keating’s warranty begins with the date of installation. In the event that your Pasta System, under warranty, needs repairs other than routine maintenance or cleaning, you are requested to contact Keating of Chicago, Inc. (at 1-800-KEATING) before calling a local service company

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Custom Pasta Post this Label in a Prominent Location on Your Unit Table of Contents Introduction Clearances II Installation InstallationPositioning Damage During ShipmentSpecifications GAS ConnectionRestraining DevicesGAS Leak Testing Check GAS Supply PressureSpecial Notices Do not CUT or Remove the Grounding Prong from this PlugIII Operating CalibrationWater and Drain Connections FillingIndicating Lights CookingShutdown DrainingCleaning Electronic TimersTimer Operation IV Maintenance Electronic Timer Operating InstructionsWarranty Repairs Maintenance Preventive Maintenance ChartPreventive Limited CalibrationService Diagnosis Trouble shootingProblem Probable Cause Solution Figures in determining proper size Problem Solutions Follow SequentiallyReplacement of a and B Boards VII Parts Lists Custom Pasta System Control Panel with Digital TimersOrdering Parts Toggle Switch Pilot on GAS Pasta System Assembly Description Models PART#RADIANT, 2 Fins ALL Pasta System Wiring Diagram GAS Pasta System with BASKET-LIFT Wiring Diagram Warranty Serving Those Who Serve The Very Best

0107 specifications

Keating of Chicago 0107 is a remarkable piece of roofing technology that exemplifies the best in contemporary design and engineering. This groundbreaking product is part of a trend towards more sustainable and efficient building practices, making it an attractive option for modern construction projects.

One of the main features of Keating of Chicago 0107 is its robust construction, designed to withstand challenging weather conditions while maintaining integrity over time. The materials used in its production are carefully selected for their durability and performance, ensuring a long lifespan and minimal maintenance needs. This makes it particularly appealing for both residential and commercial applications, where reliability is paramount.

Another significant characteristic of Keating of Chicago 0107 is its advanced insulation properties. By incorporating cutting-edge insulation technology, this roofing system helps to regulate indoor temperatures, contributing to energy efficiency. This feature is especially beneficial in areas with extreme weather, as it reduces the need for additional heating or cooling, thus lowering energy costs.

The aesthetic appeal of Keating of Chicago 0107 is also worth noting. Available in a range of colors and finishes, this roofing solution allows architects and homeowners alike to achieve a tailored look for their buildings. The sleek design complements various architectural styles, from traditional to contemporary, enhancing the overall visual impact of a structure.

In terms of installation, Keating of Chicago 0107 is user-friendly, with a straightforward process that minimizes labor costs and time. This efficiency is crucial in today’s fast-paced construction environment. Moreover, the product is engineered for adaptability, making it suitable for a variety of roof types, including flat and sloped surfaces.

Technologically, Keating of Chicago 0107 incorporates innovations that address common roofing challenges. Features such as water resistance and UV protection ensure that the system remains effective under diverse environmental conditions, preventing issues like leaks or premature wear.

Additionally, sustainability is a focal point with Keating of Chicago 0107. The materials are often sourced from recycled content, and the product can be easily installed in a way that supports eco-friendly building practices. This commitment to sustainability aligns with the growing demand for greener solutions in the construction industry.

In summary, Keating of Chicago 0107 stands out due to its combination of durability, energy efficiency, aesthetic versatility, ease of installation, and commitment to sustainability. It represents a significant advancement in roofing technology, making it a compelling choice for anyone looking to invest in a high-quality roofing solution.
Top Page Image Contents