Kenmore 17568563 manual OKAY, Lets Start Installation ONE Step AT a Time

INSTALLATION DIMENSIONS

AI	NOTE: Please refer		to the
	dimensions which match
	your disposer model number.
	B" - DISTANCE FROM
	BOTTOM	OF SINK TO
	CENTER	LINE OF
	DISPOSER OUTLET,
	ADD 1/2"WHEN STAINLESS
	STEEL SINKS ARE USED,
DRAWING REPRESENTATIVE OF	E" - LENG'R,_OF		FROM "
A FOOD WASTE DISPOSER	DISCHARGE TUBE
IMPORTANT:PLUMB WASTELINE TO PREVENTSTAND-	CENTER UNE OF
	DISPOSER OUTLET		TO
ING WATERIN DISPOSERMOTOR HOUSING.
	END OF DISCHARGE

TUBE.

OKAY, LET'S START THE

INSTALLATION ONE

STEP AT A TIME.

b

AND MAKE SURE EVER,..YTHING IS THERE. (your new

CHECK THE PARTS AGAINST THE DRAWINGS BELOW disposer may not look hke the one pictured.)

THE MOUNTING ASSEMBLY

CONSISTING OF:

Sink sleeve

(__/'/o_17oie_ing °

	"WRENCHETTE"	Fiber gasket
	(1/4INCH HEX WRENCH)
		Back-up ring
_	_) SE( F-SERVICE

Mounting ring and 3 screws

DISCHARGE TUBE, GASKET,

METAL FLANGE AND SCREW(S)

Snap ring

/