Kenmore 790.7867 manual Oven Control Functions, For a silent control panel, Temperature conversion

Oven Control Functions

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use ofyour oven, become familiar with the various pad functions of the oven as described below.

CLOCK	SET	COOK	TIME
PAD--	Used	PAD--	Used to
to set the		enter	the	length of
time of	day.	the baking		time.
OVEN INTERIOR
LIGHT PAD-- Used to
turn oven interior light
ON or OFF.
SELECT SELF-CLEAN	•		•	•
PAD--Used to select

the Self-Cleaning

cycle. A 2, 3 or 4 hour Self-Clean time may be selected.

UP and DOWN ARROW PADS-- Used along BAKE PAD--Used
with the function	pads	to select oven	to select	the bake
temperature, cook	time,	start time (when	function.
programming an automatic start time), time of				FEATURE INDICATOR
day, clean time and minute timer.
				LIGHTS--These light to
				use.
			show		which feature	is in
		•		BROIL	PAD-- Used	to
		/"	/	select	the variable broil
				function.

• O_e_

WARM & HOLD PAD--

Used to set the Warm &

Hold feature.

TIMER		SET/OFF		/	DELAY		START
			PAD--
Used	to	set or cancel		the	PAD--		Used to set
minute	timer. The		minute		the desired			start
timer	does not start or			stop	time	for	baking &
cooking.		Also,			Self-Clean.			May	be
TIMER		SET/OFF	pad is		used	with		COOK
used to set the Continuous					TIME	to program			a
Bake	feature,				delayed		bake cycle.

STOP/CLEAR

PAD--

OVEN, PREHEAT

& DOOR LOCKED

LIGHTS* -- The "OVEN"

light

Used

to

clear

any

will glow each time the oven turns on

to maintain

the

set oven

function

previously

temperature, The

"PREHEAT"

light

will glow when the oven

is

first

entered

except

the

time

set to operate,

or

if the desired

temperature

is reset higher than

the

of day and minute timer.

actual oven temperature, The "DOOR

LOCKED"

light

will flash

Press

STOP/CLEAR

to

when the oven door locks and

unlocks or

when

using

the Self-

stop

cooking.

Also

the

Clean cycle or

the

oven door lockout

is activated.

The

indicator

light

STOP/CLEAR

pad

is

wilt glow constantly after the door locks.

used

to

activate oven

door

lockout setting.

,Note: The OVEN indicat0i light on the electronic displaY will turn ON and OFF when Using the Bake feature and during preheat, This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your oven is ready.

For a silent control panel

When choosing a function, a beep will be heard each time a pad is pressed, tf desired, the control can be programmed for

silent operation. Press and hold @. After 7 seconds, the control will beep once. This will block the controls from

sounding when a pad is pressed. To return the sound, press and hold @ again for 7 seconds until the control beeps

once.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Press B,oil....appears in the display.

2.Press and hold the A until "HI" appears in the display.

3.Press and hold s,o, until °F or °C appears in the display.

4.Press the A or V to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.

10