Kenmore 790.7872 To Set the Timed Bake and Delay Start Features, When the Set Bake Time Runs Out

Page 13

Setting Oven Controls (cont'd)

To Set the Timed Bake and Delay Start Features

The @ COOK TIME and @ DELAY START pads operate the features that will turn the oven ON and OFF at the times

you select in advance. The oven can be programmed to start immediately and shut off automatically (Timed Bake) orto begin baking at a later time with a delayed start time (Delay Start).

Note: During Timed Bake the preheat indicator light will not function.

To Program the Oven to Begin Baking Immediately and To Shut Off Automatically (Timed Bake):

1.Be sure that the clock shows the correct time of day.

2.Place the food in the oven.

3. Press Bake'....

appears in the display.

4.Within 5 seconds, press the iX. or V. The display will show "350°F (177°C). ''By holding the J_. or V, the temperature can then be adjusted in 5°F increments (1°C if the control is set to display Celsius).

5.Press @. "0:00" will flash in the display (HR:MIN).

6.Press the A or V until the desired baking time appears in the display.

7.

The oven will turn ON and begin heating.

r

To Program Oven for a Delayed Start Time and to Shut-Off Automatically (Delayed Start Bake):

1.

Be sure that the clock shows the

correct

time of day.

2.

Place the food

in the oven.

 

 

3.

Press Bake'

appears

in the display.

4.Within 5 seconds, press the J_. or V. The display will show "350°F (177°C). ''By holding the _ or _'-f, the temperature can then be adjusted in 5°F increments (1°C if the control is set to display Celsius).

5.Press @. "0:00" will flash in the display (HR:MtN).

6.Press the A or V until the desired baking time appears.

7.Press @. The earliest possible start time will appear in the display.

8.Press the A or V until the desired start time appears in the display.

9.Once the controls are set, the control calculates the time when baking will stop in order to start at the time you have set.

10.The oven will turn ON at the delayed start time and begin heating.

When the Set Bake Time Runs Out:

a."END" will appear in the display window and the oven will shut-off automatically.

b. The control will beep 3 times every 60 seconds until _ is pressed.

To Change the Oven Temperature or Bake Time after Baking has Started:

1.Press the function pad you want to change.

2.Press the A or V to adjust the setting.

Use caution with the Timed Bake and Delayed Start features. Foods that can easily spoil such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be removed promptly when cooking is completed.

13

Image 13
Contents Estufa a gas Additional FOUR-YEAR Limited Warranty on Range Parts Full ONE Year Warranty on ALL Parts790 Serial Plate LocationImportant Safety Instructions Important Instructions for Cleaning Important Instructions for UsingyourGrounding Instructions Important Safety NoticeConversion to Liquefied Petroleum Gas or L.P. Gas Maintenance Agreements Sears Installation ServiceSears Maintenance Agreement U.S.AYour Gas Range Features Include Range FeaturesBefore Setting Oven Controls Setting Surface Controls Setting Surface ControlsSetting Proper Surface Burner Flame Size Oven Control Functions Temperature conversionFor a silent control panel To Set the Minute Timer Setting Oven ControlsTo Change the Minute Timer while it is in use To Set the ClockTo Set or Change the Temperature for Baking Setting Oven Controls contdTo Set Control for Continuous Bake or 12 Hour Energy Saving To Set Control for Oven Lockout LockoutWhen the Set Bake Time Runs Out To Set the Timed Bake and Delay Start FeaturesTo Operate the Oven Light To Set for BroilingFood category Setting the Warm & Hold TM Feature Setting Warmer Drawer ControlsTo set Warm & Hold To set Warm & Hold to turn on automaticallyWarmer Warm & Ready TM Drawer Indicator Light some models Setting Warmer Drawer Controls contdSelf-Cleaning Oven Self-CleaningAdhere to the following cleaning precautions Stopping or Interrupting a Select Self-Cleaning Cycle Self-Cleaning contdSurfaces Cleaning the CooktopStainless Steel, Chrome Parts Changing the Oven Light General Care & Cleaning contdTo Remove Oven Door To Replace Oven DoorTo Adjust Oven Temperature Adjusting the Oven TemperatureBefore You Call Setting Surface ControlsOccurrence Possible RangeIs too Occurrence Possible CAUSE/SOLUTIONSoil is not completely removed Call anytime, day or night U.S.A. only Call anytime, day or night U.S.A. and Canada