Kenmore 790.9434 Adjusting the Oven Temperature, Care and Cleaning of Stainless Steel some models

Page 24

General Care & Cleani

Changing the Oven Light

Oven

Light.

Wire

Holder

ng

The oven light automatically turns ON when the door is opened. The oven light may also be manually operated by pressing the Oven Light switch located on the upper left control panel,

The oven light bulb is located at the rear of the oven and is covered with a glass

shield held by a wire holder, The glass shield must be in place whenever the oven is in use.

To replace the oven light bulb:

1.Turn electrical power off at the main source or unplug the range.

2.Press wire holder to one side to release the glass shield.

3.Replace bulb with a new 40 watt appliance bulb.

4.Replace glass shield over bulb and snap wire holder into place.

5.Turn power back on again at the main source (or plug the range back in).

6.The clock will then need to be reset. To reset, see Setting the Clock and Minute Timer in this Use & Care Guide.

Be sure the range is unplugged and all parts are COOL before replacing oven light, Wear a leather-faced glove for protection against possible broken glass,

Care and Cleaning of Stainless Steel (some models)

Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the appearance of stainless parts. Refer to the Care & Cleaning table for detailed cleaning instructions.

Adjusting the Oven Temperature

Your oven control has been precisely set at the factory. This setting may differ from your previous oven however, so your recipe times may not give you the results you expect. If you think that the oven is cooking too hot or too cool for your recipe times, you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed.

To Adjust Oven Temperature:

1.Press Bake.

2.Set the temperature to 550°F (287°C) by pressing and holding the A.

3. Within 2 seconds, press and hold _ untilthe2digitdisplayappears.

Release_.Thedisplaynowindicatestheamount

of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control has the original factory calibration, the display will read "0."

4. Thetemperaturecann_wbeadjustedup_rd_wn35°F(17_c)_in5°Fstepsbypressingandh__dingtheA or V. Adjust

until the desired amount of offset appears in the display. When lowering the oven temperature, a minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of degrees.

5.When you have made the desired adjustment, press @ to go back to the time of day display.

Note: Oven temperature adjustments made will not change the Self-Cleaning feature temperature.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Estufa elctrica Table of Contents Product Record Important Safety instructions InstallationIMPORTANT iNSTRUCTiONS for Usingyour Important Safety NoticeProtection Agreements Acuerodes de protecci6n Master Protection AgreementsRange Features Your Electric Range Features IncludeBefore Setting Oven Controls Before Setting Oven Controls contd Element on and Hot Surface Indicator LightsAbout the Ceramic Glass Cooktop About the Radiant Surface ElementsSetting Surface Controls To Operate Single Radiant Surface Elements all modelsTo Operate Simmer Select Surface Element some models Setting Surface Controls contd Setting the Warmer Warm & Ready TM Zone some modelsTo Operate Dual Radiant Surface Element some models Using Power Element some models Using proper cookwareSurface Cooking Cookware Material TypesOven Control Functions For a silent control panelSetting Oven Controls To Set the Minute TimerTo Set the Clock Setting Oven Controls contd ForLockout To Set the Timed Bake and Delay Start Features To Set for Broiling Setting Warmer Drawer Controls To Operate the Oven LightTo Operate the Warmer Warm & Ready TM Drawer Setting Warmer Drawer Controls contd Warmer Warm & Ready TM Drawer Indicator Light some modelsSelf-Cleaning Self-Cleaning OvenSelf-Cleaning contd Stopping or interrupting a Select Self=Cleaning CycleGeneral Care & Cleaning How to CleanSurfaces General Care & Cleaning contd Plastic or foods with a high sugar contentFor light to moderate soil For heavy, burned on soilGeneral Care & Cleaning Special Caution for Aluminum Use on the Ceramic CooktopAdjusting the Oven Temperature Care and Cleaning of Stainless Steel some modelsBefore You Call PossibleSolutions Common Problems Before You CallPage Call anytime, day or night U.S.A. and Canada Call anytime, day or nightDomicilio Para Ordenar piezas

790.9434, 790.9433, 790.9611, 790.9612, 790.9613 specifications

The Kenmore 790 series, specifically the models 790.9613, 790.9612, 790.9611, 790.9433, and 790.9434, represents a fine selection of well-engineered gas ranges designed to enhance kitchen cooking experiences. Each model brings a suite of features and technologies that cater to both amateur cooks and seasoned chefs.

One of the standout characteristics of these models is their powerful cooking capabilities, with each range featuring multiple burners that offer varying BTU outputs. This allows for precise temperature control, making it easy to boil, simmer, or sauté with confidence. The introduction of a high-BTU burner facilitates rapid heating while the lower BTU burners provide gentle heat for delicate tasks like melting chocolate or simmering sauces.

The Kenmore 790 series is equipped with an oven that features true convection cooking, which significantly optimizes heat distribution for uniform baking. This technology circulates hot air throughout the oven, eliminating cold spots and ensuring evenly baked goods, whether it's a batch of cookies or a roast. Users can also look forward to the self-cleaning feature, which simplifies oven maintenance, using high temperatures to burn off food residues and spills.

All models in this series boast a sleek and modern design, highlighting stainless steel finishes that not only provide aesthetic appeal but are also durable and easy to clean. The spacious interior allows for larger dishes and multiple rack configurations, enhancing cooking versatility.

The intuitive digital control panel is another noteworthy feature of the Kenmore 790 series. It provides simple navigation for setting timers, adjusting temperatures, and selecting cooking modes. Additionally, some models come with a smart oven integration that allows remote monitoring and control via a smartphone app, making it convenient for users to manage their cooking from anywhere.

Safety is a priority with these ranges, which feature integrated ignition systems, ensuring a reliable startup for burners and ovens. Some models also include features like a safety lock for the oven door, offering peace of mind to users.

In summary, the Kenmore 790.9613, 790.9612, 790.9611, 790.9433, and 790.9434 embody a blend of innovation, functionality, and safety. Their robust cooking performance, ease of use, and modern design make these gas ranges an excellent choice for anyone looking to enhance their culinary capabilities in the kitchen.
Top Page Image Contents