Kenmore 790.9403, 790.9402 manual Oven Control Functions, For a silent control panel

Oven Control Functions

READ TH E iNSTRUCTiONS CAREFU LLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various pad functions of the oven as described below.

COOK TIME

PAD--Used to

		enter the	length of
CLOCK	SET	the baking	time.
PAD--	Used
to set the
time of day..
TIMER SET/OFF		_	•	®
PAD-- Used to set
or cancel the minute			/
timer. The	minute
timer does	not start

or stop cooking.

UP and DOWN ARROW PADS-- Used along with the function pads to select oven temperature, cook time, start time (when programming an automatic start time), time of day, clean time and minute timer.

%

O

BAKE PAD--Used to select the bake function.

FEATURE INDICATOR

LIGHTS-- These light to show which feature is in

use.

®BROIL PAD-- Used to

select the variable broil funct on.

®SELECT SELF-CLEAN PAD-- Used to select the

Also,		Self-Cleaning cycle. A 2,
TIMER SET/OFF	pad	3 or 4 hour Self-Clean

is used to set the Continuous Sake feature.

DELAY START PAD-- Used to set the desired start time

for baking & Self-Clean. May be used with COOK TIME to

program a delayed bake cycle.

OVEN, PREHEAT & DOOR LOCKED LIGHTS*-- The "OVEN" light will glow each time the oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and unlocks or when using the Self- Clean cycle or the oven door lockout is activated. The indicator light will glow constantly after the door locks.

time may be selected.

STOP/CLEAR PAD--

Used to clear any function previously entered except the time of day and minute timer. Press STOP/CLEAR to

stop cooking. Also the

STOP/CLEAR pad is used to activate oven

door lockout setting.

*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature, When the

preheat indicator light turns OFF, your oven is ready.

For a silent control panel

When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for

silent operation. Press and hold @. After 7 seconds, the control will beep once. This will block the controls from

sounding when a pad is pressed. To return the sound, press and hold _ again for 7 seconds until the control beeps

once.

Note: The control will return to the audible mode after a power outage.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 17O°F to 550°F (65°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Press Broil ....appears in the display.

2.Press and hold the J%. until "HI" appears in the display.

3. Press and hold B,.i_until °F or appears in the display.

4.Press the A or V to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.

11