Delayed Start Select Clean

Select Clean

When Select Clean begins the cleaning cycle, the

motorized door latch mechanism will automatically start to lock the oven door and the DOOR LOCKED indicator light will flash. DO NOT open the oven door when the DOOR LOCKED indicator light is flashing. Allow about 15 seconds for the oven door to completely lock.

Once the oven door has locked the DOOR LOCKED indicator light will glow steady. When CLn will appears in the display Select Clean is active.

Use caution when opening the oven door after self-cleaning. The oven may still be VERY HOT and can cause burns. To avoid possible burns stand to the side of the oven when opening the oven door to allow hot air or steam to escape.

When Select Clean is finished:

1.The time of day will appear in the display window and the Select Clean and DOOR LOCKED indicator lights will continue to glow.

2.Once the oven has cooled down (about 1 hour) and the DOOR LOCKED indicator light has turned off the oven door may be opened.

3.When the oven interior has completely cooled, wipe

away any residue or powdered ash with a damp cloth or paper towel.

Important notes:

•The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the 1st self-clean cycle. This will help eliminate the normal odors associated with the 1st self-clean cycle.

DO NOT attempt to open the oven door when the

DOOR LOCKED indicator light is flashing. Allow about 15 seconds for the motorized door latch mechanism to

completely lock or unlock the oven door.

When the clean time finishes the oven door will remain locked until the range has cooled sufficiently. In addition to the clean time that was programmed, you must allow about 1 additional hour for the oven to cool before you will be able to open the oven door.

•The Select Clean function will not operate whenever a radiant surface element is ON or the oven lockout is active.

To set Delay Start Select Clean:

1.Be sure the oven is empty and ALL oven racks are removed. Remove all items from the cooktop. Be sure oven door is completely closed.

. Be sure the clock shows the correct time of day.

3.Press Delay Start key pad.

4.Press and hold the A key pad to scroll to the time to start the self-clean cycle. Release the key pad when the desired start time is displayed.

. Press Select Clean key pad.	appears in the
display.

. Press A or V once. 3:00 appears in the display indicating the default 3 hour clean time is selected. To

select a 2 hour clean time press V; 2:00 appears in

the display. To select a 4 hour clean time press A ; 4:00 appears in the display.

. After selecting the clean time Select Clean is set to activate. The DOOR LOCKED indicator light will turn on and the oven door will lock in advance of the starting time. Once the starting time is reached CLn will appear in the display.

If it becomes necessary to stop Select Clean when active:

1.Press STOp.

2.If Select Clean has heated the oven to a high

temperature, allow enough time for the oven to cool and for the DOOR LOCKED indicator light to turn off. When this indicator light turns OFF the oven door may be opened.

3. Restart Select Clean if needed.

Important notes:

•If Select Clean is active and a power failure occurs, the

oven may not have thoroughly cleaned. This would depend on how much cleaning time had elapsed before the power failure. If needed after power is restored, set Select Clean again.