Kenmore 790. 7260 manual Setting Oven Controls, Oven Control Functions, Oven control keypads

Page 10

Oven Control Functions

For satisfactory use of your oven, become familiar with the various key pad functions and features of the oven.

 

 

 

 

 

Function

indicator

lights

 

Cook

 

 

 

- These

indicator

lights

 

Time

 

 

Bake

Broil

 

 

 

 

 

,&

',gj

located

above the key

 

 

 

qO;

 

 

 

SS_,O

OVEN

 

pad will glow when that

 

 

 

 

 

 

Delay

f6_o

PREHEAT

 

function

is active.

 

Timer

t_ /

m

Select

 

 

Sot/Off

Start

 

 

 

Clean

 

 

 

_,

,7_o DOOR LOCKED

 

 

 

 

 

Qz_j

 

 

 

 

 

 

 

 

 

J_l

OWN

 

 

 

 

 

 

 

_OCKOUT

 

 

 

Oven control keypads

1.Clock- Use to set the time of day.

2.Cook Time - Use Cook Time key pad when adding any Cook Time instructions.

3.Timer Set/Off - Use to set or cancel the timer. Timer Set/Off is used to set the continuous bake feature.

4.Delay Start - Use with Bake and Select Clean functions

to program a delay start bake or delay start self- cleaning cycle.

5.OVEN indicator light - The OVEN light will glow each time the oven turns on to maintain the set oven temperature.

6.PREHEAT indicator light - The PREHEAT light will glow when the oven is first set for cooking and remain on until the oven reaches the set temperature.

7.DOOR LOCKED indicator light - The DOOR LOCKED light will glow when the oven door locks or unlocks, oven lockout is active or when Select Clean is active.

8.Up / Down arrow key pads - Use with the function key pads to accept settings and to adjust temperature and times.

9.Bake - Use to select Bake function.

10.Broil - Use to select variable broil function.

11.STOP - Use to cancel any active oven function except clock or timer. Use to activate or cancel OVEN LOCKOUT.

12.Select Clean - Use to select a 2, 3 or 4 hour Self-Clean cycle time.

Setting Oven Controls

Setting Clock

When the appliance is first powered up or when the power supply to the appliance has been interrupted, 12:00 will flash in the display (See Fig. 1). The time of day must first be set before operating the oven.

To set the clock:

.

Press _) key pad once (do not hold key pad down).

2.Within 5 seconds, press and continue pressing the A

or V key pad until the correct time of day appears in the display. Release key pad.

Important note:

The time of day cannot be changed when the oven is set for cooking or when Select Clean is active.

Setting silent or audible control mode

The oven control is factory preset with audible tones active. The control may be programmed for silent operation or with

normal audible tones.

To block the control from sounding when any key pad is pressed, press and hold Delay Start key pad until the control beeps once (about 6 seconds).

To return to the audible control mode, press and hold Delay Start key pad until the control beeps once (about 6 seconds).

10

Image 10
Contents Ienmoreo Kenmore Limited Warranty ContentsSave these instructions for future reference DefinitionsImportant Safety Instructions Important Instructions for Using Your OvenImportant safety notice COOlTOPGrounding Instructions Product Record Serial Plate LocationConversion to L.R Gas Types of oven racks Before Setting Oven ControlsRemoving, replacing and arranging racks Air circulation in the ovenSetting proper burner flame size Before Setting Surface ControlsUsing proper cookware Cookware material typesSetting surface burners Setting Surface ControlsHome canning Setting silent or audible control mode Setting Oven ControlsSetting Clock Oven Control FunctionsChanging temperature display F or C Setting Oven ControlsSetting Timer To cancel bake at anytime Setting BakeOven Door To activate Oven Lockout feature Oven LockoutSetting Cook Time When the cook time runs outSetting Delay Start Press Cook Time key pad will appear in displaySee 1st side Suggested broil settings table gas ovenBroil ThickAdjusting oven temperature To adjust oven temperatureRead before starting Select Clean Select CleanSetting Select Clean To set Delay Start Select Clean Delayed Start Select CleanWhen Select Clean is finished If it becomes necessary to stop Select Clean when activeCare & Cleaning Cleaning recommendationCleaning surface burner heads Cleaning the cooktop and surface burnersCleaning burner caps To clean the burner head ignition portsReplacing oven light some models Glass shield Wire HolderAluminum foil and utensils To replace the interior oven light bulbRemoving and replacing the lift-off oven door Special door care instructionsInstalled SolutionSee Adjusting ApplianceSection Before You Call Solutions to common problems Page Protection Agreements Sea/rs