Kenmore 721.80403, 721.80524, 721.80404 Step Prepare the Venting Blower, Room Vented Installation

Page 10

STEP 3:

PREPARE THE VENTING BLOWER

Your microwave oven is shipped with the blower assembled for room venting (recirculating). You need to adjust

the blower if you want wall vented or roof vented installation.

A. WARNING _k

ELECTRICAL SHOCK HAZARD! UNPLUG UNIT BEFORE WORKING ON IT.

•DO NOT PULL OR STRETCH THE BLOWER WIRING! Pulling and stretching the blower wiring could result in electrical shock.

REMOVE THE MOUNTING PLATE:

1.Remove any shipping materials and parts from inside the microwave oven.

2.Cover the counter top or cooktop with a thick, protective covering to protect it from damage and dirt. See Figure 10.

NOTE: If you have a free-standing range, disconnect it, move it onto a piece of cardboard or hardboard and pull it away from the wall, so that you can get closer to the upper cabinet and back wall for easier measuring and drilling.

Remove mounting plate 2 screws from the mounting plate as shown and discard them.

(See Figure 11 .)

This plate will be used as the rear mounting plate.

(It will be used to locate and mark the mounting holes on the rear wall.)

5, Locate exhaust adaptor, grease filters and hardware packet.

6.At this point, remove any adhesive tape (if there is any), on the exhaust adaptor, the grease filters and the power supply cord.

ROOM VENTED INSTALLATION:

Go to STEP 4, PREPARE THE WALL AND UPPER CABINET FOR INSTALLATION located on page 13.

A thick, protective covering

Figure 10

J

L=== Control panel side

Figure 11

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Instructions Before YOU Start Your Safety FirstProper installation is the installers responsibility Back of ovenDo not Expose Yourself to Excessive Microwave Energy This Appliance Must be GroundedMake Sure YOU have Enough Space and Support Four 1/4 x 3 toggle bolts Actual Size for drywall holes PARTS, TOOLS, MaterialsFollowing Parts are Supplied with the Oven One rear wall template- Not Actual SizePhillips Screwdriver for the screws Prepare Electrical Connections Avoid Electrical SHOCK! this Appliance Must be GroundedStep Prepare the Venting S Ysytem Wall VentingLes For 6 Round Systems Standard FittingsFor 3 1/4 x 10 Systems TransitionRoom Vented Installation Step Prepare the Venting BlowerStep Prepare Wall Vented InstallationVenting Blower Roof Vented Installation Measure and Tack / Tape UP Template Prepare the Wall and Upper Cabinet for InstallationSee Figure Be Very Careful When Drilling Holes Into the Wall Drill the Holes in the Wall and Upper CabinetInstall the Mounting Plate to the Wall Oven Must be Connected to AT Least ONE Wall StudDamper Hinge side up Back of oven Wall side Tabs Guides Step Attach the Oven to the Wall Using a screw as shown in , to inside

721.80523, 721.80522, 721.80409, 721.80402, 721.80529 specifications

The Kenmore 721 series, which includes models 721.80524, 721.80404, 721.80403, 721.80529, and 721.80402, represents a line of advanced over-the-range microwaves that seamlessly combines functionality with modern design. Key elements across these models include a powerful cooking performance, advanced features, and energy efficiency, making them ideal for contemporary kitchens.

A standout characteristic of these models is the impressive wattage, typically ranging between 1000 and 1100 watts, allowing for quick and efficient cooking. This power is complemented by multiple power levels that enable users to tailor their cooking settings for various tasks, from defrosting to reheating and intense cooking scenarios.

Incorporating sensor cooking technology, these microwaves automatically adjust cooking time and power levels based on the moisture released during the cooking process. This feature ensures consistently perfect results, reducing the guessing game that often accompanies microwave cooking. The inclusion of dedicated one-touch cooking options for common foods enhances user convenience, as simple buttons can be pressed for popcorn, baked potatoes, and more.

The Kenmore 721 series also prioritizes user-friendly controls, often featuring a digital display and intuitive push-button interface. The controls are designed to be easy to operate, even for those with limited experience in using kitchen appliances.

Additionally, the built-in venting system found in these over-the-range microwaves not only aids in ventilation but also enhances the overall kitchen environment. The strong ventilation fan effectively eliminates smoke, steam, and odors, ensuring a fresher cooking space.

Moreover, the design aesthetics of the Kenmore 721 models reflect modern sensibilities, often available in sleek stainless steel finishes that match various kitchen decors. With a spacious interior capable of accommodating larger dishes, users appreciate the generous capacity for both cooking and reheating.

Overall, the Kenmore 721.80524, 721.80404, 721.80403, 721.80529, and 721.80402 offer an ideal combination of power, convenience, and style. These models fit seamlessly into modern kitchens while providing the efficiency and reliability necessary for everyday cooking tasks. With their advanced features and user-friendly design, they stand out as excellent choices for those looking to enhance their culinary experience.
Top Page Image Contents