Kenmore 721.80522, 721.80524, 721.80404, 721.80403 Drill the Holes in the Wall and Upper Cabinet

Page 14

STEP 4: PREPARE THE WALL AND UPPER CABINET FOR INSTALLATION

DRILL THE HOLES IN THE WALL AND UPPER CABINET.

A, WARNING _,

BE VERY CAREFUL WHEN DRILLING HOLES INTO THE WALL.

Electrical wires could be concealed behind the wall covering and if the drill hits them you could get an electric shock.

1.Find the points on the mounting plate labeled "A", "B", "C" and "D". Drill a 3/16" diameter hole at any of these points that are in front of a wall stud. Drill a 3/4" diameter hole at any of these points that are over drywall.

2.Drill a 3/8" hole at points "J" and "K" on the upper cabinet template.

NOTE: If the bottom of the upper cabinet is recessed 3/4" or more, you will need 2"x2" filler blocks (not included) to provide additional support for the bolts. See Figure 24.

•Mark the center of each filler block and drill a 3/8" diameter hole at the mark.

•Align filler blocks over the two openings in the top of the microwave oven cabinet and attach to cabinet with masking tape. See Figure 25.

3.Cut or drill a 2" diameter hole at the area marked "M", "power supply cord hole" on the upper cabinet template. If the upper cabinet is metal, you will need to cover the edge of the hole with the power supply cord bushing (supplied) to prevent damage to the cord from the rough metal edge.

_k WARNING

_k

cabinet

 

 

cabinet front filler block

YOU MUST COVER THE EDGE OF

bottom shelf

THE POWER SUPPLY CORD HOLE

 

IN A METAL CABINET WITH THE

 

POWER SUPPLY

CORD

BUSHING.

 

FAILURE TO DO SO COULD

 

RESULT IN DAMAGE TO THE CORD

 

AND ELECTRIC

SHOCK.

Figure 24

 

 

 

4. Cut out the venting areas (with the saber saw):

 

• Roof Venting: cut out the shaded area marked "L"

 

on the upper cabinet template.

 

filler

• Wall or Room Venting (Recirculating): go to STEP

block

5, INSTALL THE MOUNTING PLATE, located on page 15.

5.Use caulking compound to seal the exterior wall or roof opening around the wall cap or roof cap.

Figure 25

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Instructions Before YOU Start Your Safety FirstProper installation is the installers responsibility Back of ovenDo not Expose Yourself to Excessive Microwave Energy This Appliance Must be GroundedMake Sure YOU have Enough Space and Support Four 1/4 x 3 toggle bolts Actual Size for drywall holes PARTS, TOOLS, MaterialsFollowing Parts are Supplied with the Oven One rear wall template- Not Actual SizePhillips Screwdriver for the screws Prepare Electrical Connections Avoid Electrical SHOCK! this Appliance Must be GroundedStep Prepare the Venting S Ysytem Wall VentingLes For 6 Round Systems Standard FittingsFor 3 1/4 x 10 Systems TransitionRoom Vented Installation Step Prepare the Venting BlowerVenting Blower Wall Vented InstallationStep Prepare Roof Vented Installation See Figure Prepare the Wall and Upper Cabinet for InstallationMeasure and Tack / Tape UP Template Be Very Careful When Drilling Holes Into the Wall Drill the Holes in the Wall and Upper CabinetInstall the Mounting Plate to the Wall Oven Must be Connected to AT Least ONE Wall StudDamper Hinge side up Back of oven Wall side Tabs Guides Step Attach the Oven to the Wall Using a screw as shown in , to inside

721.80523, 721.80522, 721.80409, 721.80402, 721.80529 specifications

The Kenmore 721 series, which includes models 721.80524, 721.80404, 721.80403, 721.80529, and 721.80402, represents a line of advanced over-the-range microwaves that seamlessly combines functionality with modern design. Key elements across these models include a powerful cooking performance, advanced features, and energy efficiency, making them ideal for contemporary kitchens.

A standout characteristic of these models is the impressive wattage, typically ranging between 1000 and 1100 watts, allowing for quick and efficient cooking. This power is complemented by multiple power levels that enable users to tailor their cooking settings for various tasks, from defrosting to reheating and intense cooking scenarios.

Incorporating sensor cooking technology, these microwaves automatically adjust cooking time and power levels based on the moisture released during the cooking process. This feature ensures consistently perfect results, reducing the guessing game that often accompanies microwave cooking. The inclusion of dedicated one-touch cooking options for common foods enhances user convenience, as simple buttons can be pressed for popcorn, baked potatoes, and more.

The Kenmore 721 series also prioritizes user-friendly controls, often featuring a digital display and intuitive push-button interface. The controls are designed to be easy to operate, even for those with limited experience in using kitchen appliances.

Additionally, the built-in venting system found in these over-the-range microwaves not only aids in ventilation but also enhances the overall kitchen environment. The strong ventilation fan effectively eliminates smoke, steam, and odors, ensuring a fresher cooking space.

Moreover, the design aesthetics of the Kenmore 721 models reflect modern sensibilities, often available in sleek stainless steel finishes that match various kitchen decors. With a spacious interior capable of accommodating larger dishes, users appreciate the generous capacity for both cooking and reheating.

Overall, the Kenmore 721.80524, 721.80404, 721.80403, 721.80529, and 721.80402 offer an ideal combination of power, convenience, and style. These models fit seamlessly into modern kitchens while providing the efficiency and reliability necessary for everyday cooking tasks. With their advanced features and user-friendly design, they stand out as excellent choices for those looking to enhance their culinary experience.
Top Page Image Contents