Kenmore 721.80409, 721.80524 Prepare the Wall and Upper Cabinet for Installation, See Figure

Page 13

STEP 4: PREPARE THE WALL AND UPPER CABINET FOR INSTALLATION

MEASURE AND TACK / TAPE UP THE

TEMPLATE

1.Using a plumb line and (metal) measuring tape, find and mark the vertical center line (_ on the back wall, as in Figure 22.

2.Find and mark one or two points where the studs are on the wall (Studs are normally 16 inches apart.) and then measure and mark the stud locations. If you cannot find any wall stud, consult a local building contractor.

Zk CAUTION A,

DO NOT ATTEMPT TO INSTALL THE

MICROWAVE OVEN IF YOU CANNOT FIND A

WALL STUD.

3.Line up the plumb line on the wall with the center line on the mounting plate.

NOTE: Be sure the minimum width is 30 inches and the distance from the top of the mounting plate to the range or counter top is at least 30 inches. See Figure 4 on page 4.

4.Center mounting plate in opening by lining up the plumb line on wall with centerline on mounting plate. Make sure the minimum width is 30 inches and that the top of the mounting plate is located a minimum of 30 inches above the cooking surface.

See Figure 23.

NOTE: If the front edge of the cabinet is lower than the back edge, adjust the mounting plate to be level with the cabinet front.

5.Measure the bottom of the upper cabinet frame. Trim the edges "A", "B" and "C" on the upper cabinet template so that the template will fit on the bottom of the upper cabinet. If upper cabinet has a recessed frame, trim template so that it fits inside the recessed area. Align the centerline of the upper cabinet template with the centerline of the mounting plate; then securely tape or tack the upper cabinet template in place. See Figure 23.

O

i

I

I

I

I

im

Figure 22

O O

, ,,_'/

Figure 23

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Instructions Proper installation is the installers responsibility Your Safety FirstBefore YOU Start Back of ovenThis Appliance Must be Grounded Do not Expose Yourself to Excessive Microwave EnergyMake Sure YOU have Enough Space and Support Following Parts are Supplied with the Oven PARTS, TOOLS, MaterialsFour 1/4 x 3 toggle bolts Actual Size for drywall holes One rear wall template- Not Actual SizePhillips Screwdriver for the screws Avoid Electrical SHOCK! this Appliance Must be Grounded Prepare Electrical ConnectionsWall Venting Step Prepare the Venting S YsytemFor 3 1/4 x 10 Systems Standard FittingsLes For 6 Round Systems TransitionStep Prepare the Venting Blower Room Vented InstallationStep Prepare Wall Vented InstallationVenting Blower Roof Vented Installation Measure and Tack / Tape UP Template Prepare the Wall and Upper Cabinet for InstallationSee Figure Drill the Holes in the Wall and Upper Cabinet Be Very Careful When Drilling Holes Into the WallOven Must be Connected to AT Least ONE Wall Stud Install the Mounting Plate to the WallDamper Hinge side up Back of oven Wall side Tabs Guides Step Attach the Oven to the Wall Using a screw as shown in , to inside

721.80523, 721.80522, 721.80409, 721.80402, 721.80529 specifications

The Kenmore 721 series, which includes models 721.80524, 721.80404, 721.80403, 721.80529, and 721.80402, represents a line of advanced over-the-range microwaves that seamlessly combines functionality with modern design. Key elements across these models include a powerful cooking performance, advanced features, and energy efficiency, making them ideal for contemporary kitchens.

A standout characteristic of these models is the impressive wattage, typically ranging between 1000 and 1100 watts, allowing for quick and efficient cooking. This power is complemented by multiple power levels that enable users to tailor their cooking settings for various tasks, from defrosting to reheating and intense cooking scenarios.

Incorporating sensor cooking technology, these microwaves automatically adjust cooking time and power levels based on the moisture released during the cooking process. This feature ensures consistently perfect results, reducing the guessing game that often accompanies microwave cooking. The inclusion of dedicated one-touch cooking options for common foods enhances user convenience, as simple buttons can be pressed for popcorn, baked potatoes, and more.

The Kenmore 721 series also prioritizes user-friendly controls, often featuring a digital display and intuitive push-button interface. The controls are designed to be easy to operate, even for those with limited experience in using kitchen appliances.

Additionally, the built-in venting system found in these over-the-range microwaves not only aids in ventilation but also enhances the overall kitchen environment. The strong ventilation fan effectively eliminates smoke, steam, and odors, ensuring a fresher cooking space.

Moreover, the design aesthetics of the Kenmore 721 models reflect modern sensibilities, often available in sleek stainless steel finishes that match various kitchen decors. With a spacious interior capable of accommodating larger dishes, users appreciate the generous capacity for both cooking and reheating.

Overall, the Kenmore 721.80524, 721.80404, 721.80403, 721.80529, and 721.80402 offer an ideal combination of power, convenience, and style. These models fit seamlessly into modern kitchens while providing the efficiency and reliability necessary for everyday cooking tasks. With their advanced features and user-friendly design, they stand out as excellent choices for those looking to enhance their culinary experience.
Top Page Image Contents