Kenmore 721.80524, 721.80404, 721.80403 Damper Hinge side up Back of oven Wall side Tabs Guides

Page 16

STEP 5: INSTALL THE MOUNTING PLATE TO THE WALL

TO PREPARE THE REAR WALL CUTOUT OPENING AND EXHAUST ADAPTOR/MOUNTING PLATE FOR WALL VENTING AND ROOF VENTING:

NOTE: If room vented installation is used, skip this step.

1.Place the mounting plate against the rear wall as described in step 5 item 1 (page 15).

2.Use the wall template to determine the location and size of the box cutout for the rear wall duct. See

Figure 28.

•Attach the exhaust adaptor to the rear mounting plate by sliding it into the guides at the top center of the plate on the wall side. Push in securely until it is past the top locking tabs and in the lower locking tabs. Take care to assure the damper hinge is installed so that it is at the top and that the damper swings freely.

•Carefully guide the exhaust adaptor, now attached to the Back of oven, into the house duct, before using the screws to attach the plate to the wall. This will assure proper alignment for installation. See Figure 29.

•Return to step 5, item 3 (page 15) to continue. After completing the installation of the Back of oven, again check the rear damper for free movement to assure it will operate properly.

Exhaust Adaptor

Slide exhaust

adaptor into guides on rear panel.

t

REARWALLTEMPLATE

Figure 28

Damper

(hinge side up)

Back of oven

(wall side)

ig

Tabs Guides

Figure 29

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Instructions Your Safety First Proper installation is the installers responsibilityBefore YOU Start Back of ovenDo not Expose Yourself to Excessive Microwave Energy This Appliance Must be GroundedMake Sure YOU have Enough Space and Support PARTS, TOOLS, Materials Following Parts are Supplied with the OvenFour 1/4 x 3 toggle bolts Actual Size for drywall holes One rear wall template- Not Actual SizePhillips Screwdriver for the screws Prepare Electrical Connections Avoid Electrical SHOCK! this Appliance Must be GroundedStep Prepare the Venting S Ysytem Wall VentingStandard Fittings For 3 1/4 x 10 SystemsLes For 6 Round Systems TransitionRoom Vented Installation Step Prepare the Venting BlowerStep Prepare Wall Vented InstallationVenting Blower Roof Vented Installation Measure and Tack / Tape UP Template Prepare the Wall and Upper Cabinet for InstallationSee Figure Be Very Careful When Drilling Holes Into the Wall Drill the Holes in the Wall and Upper CabinetInstall the Mounting Plate to the Wall Oven Must be Connected to AT Least ONE Wall StudDamper Hinge side up Back of oven Wall side Tabs Guides Step Attach the Oven to the Wall Using a screw as shown in , to inside

721.80523, 721.80522, 721.80409, 721.80402, 721.80529 specifications

The Kenmore 721 series, which includes models 721.80524, 721.80404, 721.80403, 721.80529, and 721.80402, represents a line of advanced over-the-range microwaves that seamlessly combines functionality with modern design. Key elements across these models include a powerful cooking performance, advanced features, and energy efficiency, making them ideal for contemporary kitchens.

A standout characteristic of these models is the impressive wattage, typically ranging between 1000 and 1100 watts, allowing for quick and efficient cooking. This power is complemented by multiple power levels that enable users to tailor their cooking settings for various tasks, from defrosting to reheating and intense cooking scenarios.

Incorporating sensor cooking technology, these microwaves automatically adjust cooking time and power levels based on the moisture released during the cooking process. This feature ensures consistently perfect results, reducing the guessing game that often accompanies microwave cooking. The inclusion of dedicated one-touch cooking options for common foods enhances user convenience, as simple buttons can be pressed for popcorn, baked potatoes, and more.

The Kenmore 721 series also prioritizes user-friendly controls, often featuring a digital display and intuitive push-button interface. The controls are designed to be easy to operate, even for those with limited experience in using kitchen appliances.

Additionally, the built-in venting system found in these over-the-range microwaves not only aids in ventilation but also enhances the overall kitchen environment. The strong ventilation fan effectively eliminates smoke, steam, and odors, ensuring a fresher cooking space.

Moreover, the design aesthetics of the Kenmore 721 models reflect modern sensibilities, often available in sleek stainless steel finishes that match various kitchen decors. With a spacious interior capable of accommodating larger dishes, users appreciate the generous capacity for both cooking and reheating.

Overall, the Kenmore 721.80524, 721.80404, 721.80403, 721.80529, and 721.80402 offer an ideal combination of power, convenience, and style. These models fit seamlessly into modern kitchens while providing the efficiency and reliability necessary for everyday cooking tasks. With their advanced features and user-friendly design, they stand out as excellent choices for those looking to enhance their culinary experience.
Top Page Image Contents