Precision Power DCX 800.5, DCX 300.4, DCX 1000.4 manual Features, Specifications

FEATURES

Advanced Instrumentation Input Stage

TC-X Crossover 12dB/Octave; HP/LP/FULL; 30-4kHz Crossover Adaptive PWM Power Supply (DCX 300.4, DCX 600.4, DCX 800.5) AP-IVProtection Circuity

Fully Regulated PWM Power Supply (DCX 1000.4) Fully Complementary Darlington Output Stage Forced Air Thermal Management (DCX 1000.4) QBASSTM Bass Boost (DCX 300.4)

QBASS PlusTM Bass Boost (DCX 600.4, DCX 800.5, DCX 1000.4) High Voltage Input Capability with -12dB Attention Switch

Gold Plated RCA Input and Output Connectors PowerLockTM Speaker and Power Wire Connectors Mixed Mono/Stereo Operation

2 Yr Warranty if installed by an Authorized PrecisionPower Dealer

SPECIFICATIONS

Power Ratings
MODEL	4ohm STEREO		2ohm STEREO		4ohm MONO
DCX 300.4	4	X 50	4	X 75	2 X 150
DCX 600.4	4	X 75	4	X 150	2 X 300
DCX 1000.4	4	X 125	4	X 250	2 X 500
DCX 800.5	4	X 50	4	X 100	2 X 200
	4ohm MONO		2ohm MONO
5/Ch.	1	X 200	1	X 400

All power ratings given above are tested at 12.5V; 4 ohms; 20Hz - 20kHz.

General Specifications
Frequency Response	20Hz - 20kHz
Power Bandwidth	10Hz - 50 kHz
Total Harmonic Distortion	>0.02%
S/N Ratio	<110dB
Input Topology	Instrumentation
Input Sensitivity	150mV - 12 Volts RMS
	(with -12dB pad)
Input Impedance	40 kOhms
Load Impedance (stereo)	2 - 8 Ohms
Load Impedance (bridged)	4 - 8 Ohms
Supply Voltage	11 - 16 Volts
Damping Factor	>500
Slew Rate	>20V/µs

3