AMPLIFIER STATUS LEDS
3 4
SHORT PROTECT THERMAL PROTECT
POWER | CLIP OUT |
1 2
The LEDs provide the following indications:
1.Power - This LED illuminates RED when the amplifier power is turned on with the remote input (output muted). After a short time delay this LED will turn GREEN (amplifier ready).
2.Clip Output - This LED illuminates RED on the peaks of the output signal when the peaks are too high. This clipping causes audible distortion in the speakers.
3.Short - This LED illuminates RED on a short condition. The amplifier will turn off and try to turn back on.
4.Thermal - This LED illuminates RED on a thermal condition. The amplifier will turn off and turn back on in a minute or so.
Note: Read the
5