Kenmore 3235, 790.323 Seffing Surface Burner Controls, Setting Proper Surface Burner Flame Size

Page 9

Seffing Surface Burner Controls

Do not place plastic items

such as salt and pepper shakers, spoon

holders or plasflc wrappings on top of the range when if is in use. These items could melt or ignite. Potholders, towels or wood spoons could catch fire if placed too close to a flame.

Manual Lighflng

In the event of an electrical power outage, the surface burners can be lit manually.

To light a surface burner, hold a lit match to the burner head, then slowly turn the surface control knob to UTE. After burner lights push in and turn knob to desired setting. Use caution when lighting surface burners manually.

Setting Proper Surface Burner Flame Size

For most cooking, start on the highest control setting and then turn to a lower

one to complete the process. Use the recommendations below as a guide for determining proper flame size for various types of cooking. The size and type of utensil used and the amount of food being cooked will influence the setting needed for cooking.

High

Flame

Start

most

foods;

bring water

to a boil; pan

broiling.

Medium Flame

Maintain a

slow

boil;

thicken

sauces, gravies;

steaming.

Low

Flame

Keep

foods

cooking;

poach;

stewing.

 

_These settings are based on using medlum=welght metal or aluminum

pans wlfh llds. Settings may vary when using other types of pans. The color of the flame is the key to proper burner adjustment. A good flame is clear, blue and hardly visible in a well-lighted room. Each cone of flame should be steady and sharp. Clean burner if flame is yellow-orange.

Regardless of size, always select cookware that is suitable for the amount and type of food being prepared. Select a burner and flame size appropriate to the pan. Never allow flames to extend beyond the outer edge of the pan.

Proper flame size

Figure 1

flame wastes heat and energy and increases your risk of being burned by the flame (Figure 1).

For deep fat frying, use a thermometer and adjust the surface control knob accordingly. If the fat is too cool, the food will absorb the fat and be greasy. If the fat is too hot, the food will brown so quickly that the center will be undercooked. Do not attempt to deep fat fry too much food at once as the food will neither brown nor cook properly.

Image 9
Contents Ie Elite Contents Proper Installation--Be sure your appllance is properly This symbol ThatInstructions given MWHAT to do iF YOU Smell GASIMPORTANT Safety Notice Please carefully read and save these instructionsDo Not Use Decorative Surface Burner Covers. If a Product Record Conversion to Liquefied Petroleum Gas or L.P. GasSerial plate is Located under the J burner box Control Locations of the Gas Surface Burners Before Setting Surface ControlsDual Ring Burner Head Assembly Bridge Burner Head AssemblyRemember m do not Allow SPILLS, FOOD, Cleaning Agents Using a wok .or supplied Surface CookingUse Proper Cookware Seffing Surface Burner Controls Setting Proper Surface Burner Flame SizeSuch as salt and pepper shakers, spoon Manual LighflngSetting the Bridge Burner Seffing the Bridge BurnerOperating the Bridge Burner Simmering Operation Zone a Setting the Dual Ring BurnerGeneral Care & Cleaning Cleaning Various Parts of Your CooktopPorcelain enamel cooktop cleaning instructions some models Cleaning the burner caps Cleaning the gratesCleaning HeadsBefore You Call Solutions to Common ProblemsSurface burner flame burns half way Surface burner flame is orangeMaster Protection Agreements Protection AgreementsCall anytime, day or night U.S.A. and Canada Your Home