Kenmore 630.1390, 630.1391 manual Maintenance Tasks, Clean the Stainless Steel inner Door and Tub

Page 17

MAINTENANCE TASKS

Certain areas of your dishwasher require occasional maintenance. The maintenance tasks are easy to do and will ensure continued superior performance from your dishwasher:

*Wiping up Spiffs and Splash-outs

Water may occasionally splash out of your dishwasher, especially if you interrupt a cycle or open the dishwasher door during a cycle. To avoid floor damage and possible mold growth, do not allow wet areas to remain around or under the dishwasher.

*Clean the Stainless Steel inner Door and Tub

Clean the outer edges of the inside door panel regularly to remove debris that might coiled from normal loading.

if spots begin to appear on the stainless steel tub or inner door, make sure the rinse agent reservoir is full.

"Clean the drain air gap

Clean the drain air gap periodically to ensure proper drainage of your dishwasher. With most types you lift off the chrome cover. Unscrew the plastic cap. Then check far any soil buildup. Clean if necessary.

*Check and clean the Spray arm nozzles

Occasionally check the spray arms to ensure that the spray arm nozzles (holes) are unobstructed. You must remove the spray arms to check them for obstruction.

To remove the top spray arm:

3.Remove the spray arm as shown above.

4.Look for obstruction in the spray nozzles.

5.if the spray nozzles need cleaning, flush them under running water.

To reinstall the top spray arm:

1.Return the top spray arm to its installed position.

2.Return the locking nut to its installed position and turn it 1/8 turn clockwise.

3.Return the top rack to the tap rack railer guides.

your fingers. The large object trap could contain sharp ects.

To remove the bottom spray arm:

1.Remove the empty bottom rack from the dishwasher tub.

2.Grasp and lift the bottom spray arm as shown below.

1.Remove the empty top rack from the dishwasher.

2.Turn the rack upside down. The top spray arm is held in position by a lacking nut as shown above. Turn the locking nut counter-clockwise and remove it as shown above to release the spray arm.

3.Look for obstruction in the spray nozzles.

4.if the spray nozzles need cleaning, flush them under running water.

To reinstall the bottom spray arm:

1.Return the bottom spray arm to its installed position and press it so that it snaps into place.

2.Return the bottom rack to its installed position.

*Check and clean the filter system

This dishwasher has a filter system that consists of a Large

Object Trap/Cylinder Filter assembly and a Fine Filter. Select models have an additional Micro Filter.

The filter system is located an the inside of your dishwasher under the lower rack and is easily accessible. During narma! use, the filter system is self-cleaning.You should occasionally inspect it far foreign objects and clean it when necessary.

17

Image 17
Contents Lenmoreo For prices and additional information in the U.S.A Page Page Handles System, orIIIIIllIlllllllllll!lllliiIll$1111l Model dependant RecommendedNot Recommended ImmediatelyPage Flexible Silverware Basket Small iTEM Clips Manual Rack Height AdjustmentCUP Shelves 3TBSMAX Adding DetergentWater Wash CycleRinseAgent Soil Level Sanitized Indlcator Can be selectedGallons Control Lock Canceling a CycleCycle Completion Signal select models Clean the drain air gap Maintenance TasksClean the Stainless Steel inner Door and Tub Clean the Exterior Door Panel AssemblyClean the Door Gasket Winterizing Your DishwasherProblem Cause On opening and closing the dispenser Dishwasher nat

630.1390, 630.1391 specifications

The Kenmore 630.1391 and 630.1390 models stand out in the realm of kitchen appliances, particularly as top-tier microwave ovens. Kenmore, a brand synonymous with home convenience and quality, has equipped these models with advanced features and technologies to enhance the cooking experience.

These microwave ovens boast a robust design, available in a variety of finishes that can complement any kitchen décor. The sleek exterior is matched by an intuitive control panel, which allows users to operate the unit with ease. The digital display clearly indicates cooking times and settings, making it user-friendly for all age groups.

One of the standout features of the Kenmore 630.1391 and 630.1390 is their powerful cooking capability. With high wattage, these microwaves can quickly heat and cook food, significantly reducing preparation times. The inverter technology incorporated into these models ensures that food is cooked evenly without the risk of overcooking. This feature allows for more consistent results, whether reheating leftovers or defrosting frozen items.

Another notable characteristic is the spacious interior that caters to various cooking needs. The 630.1391 model, in particular, offers a large turntable that accommodates larger dishes, providing flexibility in meal preparation. The interior is also designed for easy cleanup, with a material that resists stains and odors.

The sensor cooking feature is another technological advancement found in these models. This function automatically adjusts cooking time and power levels based on the moisture released by the food, resulting in perfectly cooked meals every time. Along with pre-programmed settings for popular dishes, this feature takes the guesswork out of cooking.

Safety is a top concern in any home appliance, and Kenmore has addressed this by including several safety features in the 630.1391 and 630.1390 models. Child lock functions prevent unintentional operation, ensuring that young hands cannot easily access the microwave.

In summary, the Kenmore 630.1391 and 630.1390 microwave ovens combine style, power, and innovative technology to meet the diverse needs of modern kitchens. With features designed to simplify cooking while ensuring safety and quality, these models are an excellent addition for anyone looking to enhance their culinary capabilities.