ToolsNecessary:
iiii,. !ii!Disconnecte,ectrica,supp,y.
2.Open both doors, then remove toe grille.
3.Close doors.
To Remove Refrigerator Door:
1.Remove top hinge cover screw on refrigerator door and remove cover.
2.Trace around hinge with soft lead pencil. This will make it easier to realign doors when they are replaced.
3.Remove top hinge and lift refrigerator door off bottom hinge pin. Set door aside.
4.Remove bottom hinge, if necessary.
5.Reverse this procedure to reinstall refrigerator door.
ToRemoveFreezerDoor:
1.Disconnect water line coming from lower hinge of freezer door at connection located under front offreezer: Press outer ring against face of fitting, then pull to remove tube.
2.Remove top hinge cover screw on freezer door and remove cover.
3.Disconnect wiring harness connector plug at top hinge: place your thumbs on fiat sides of each connector and bend both parts back and forth, then with firm grasp, pull both pieces apart.
4.Tracearoundhingewithsoftleadpencil. Thiswillmakeiteasiertorealign doors when they are replaced.
5.Remove top hinge, allowing wiring harness to pull through hinge and lift freezer door off of bottom hinge pin. Lay door down flat to avoid kinking water line.
6.Remove bottom hinge, if necessary.
7.Reverse this procedure to reinstall freezer door.
When both doors have been reinstalled, connect water line by inserting tube and push until mark touches face of fitting, replace toe gdtle and plug in electrical power
cord. Turn both temperature controls to center position. Adjust setfings as necessary.
iiiii_i_iiiiiiiii!i_i_i,lii__Iiiiii_ _i_i_i!i!_i!_i_!i_iill
i ¸
£i61
8