Kenmore 795.7109 manual Section

Page 38

COOLING

Refrigerator or

Refrigerator

was recently installed,

it may

take

up to

24 hours for

each

compartment

to

Freezer section

is too

 

reach

the desired

temperature.

 

 

 

warm.

Air vents are

blocked.

Rearrange

items

to allow

air to

flow

throughout

the

 

 

 

compartment. Refer to the Airflow diagram in the

 

 

 

Using

Your

Refrigerator

section.

 

 

 

Doors are opened often or for long periods of time.

Unit is installed in a hot location.

A large amount of food or hot food was added to either compartment.

When the doors are opened often or for long periods of time, warm, humid air enters the compartment.

This raises the temperature and moisture level within the compartment. To lessen the effect, reduce the frequency and duration of door openings.

The refrigerator should not be operated in temperatures above 110°1.

Adding food warms the compartment requiring the cooling system to run. Allowing hot food to coot to room temperature before putting it in the refrigerator will reduce this effect.

interior moisture buildup.

Doors not closed correctly.

Temperature controt is not set correctly.

Defrost cycle has recently completed.

Doors are opened often or for long periods of time.

Doors not closed correctly.

Weather is humid.

Defrost cycle recently completed.

Food is not packaged correctly.

See the Doors will not close correctly or pop open section in Parts & Features Troubleshooting.

if the temperature is too warm, adjust the control one increment at a time and wait for the temperature to

stabilize. Refer to the Setting the Controls section for more information.

During the defrost cycle, the temperature of each compartment may raise slightly and condensation may form on the back wall. Wait 30 minutes and confirm the proper temperature has been restored once the defrost cycle has completed.

When the doors are opened often or for long periods of time, warm, humid air enters the compartment.

This raises the temperature and moisture level within the compartment. To lessen the effect, reduce the frequency and duration of door openings.

See the Doors will not close correctly section in the Troubleshooting section.

Humid weather allows additional moisture to enter the compartments when the doors are opened leading to condensation or frost. Maintaining a reasonable level of humidity in the home will help to control the amount of moisture that can enter the compartments.

During the defrost cycle, the temperature of each compartment may raise slightly and condensation may form on the back wall. Wait 30 minutes and confirm that the proper temperature has been restored once the defrost cycle has completed.

Food stored uncovered or unwrapped, and damp containers can lead to moisture accumulation within

each compartment. Wipe all containers dry and store food in sealed packaging to prevent condensation and frost.

38

MFL62184418

FIE]E]E]E].indd 38

2011.4.7

11:54:41 AM

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Use & Care Guide Manual de Uso y Cuidado Guide dUfilisafion ef dEntretienElectrical Grounding SafetySection Protection Agreements Water FilterKenmore Limited Warranty Disclalmer of implled warranties llmltatian of remediesMaster Protection Agreements Basic Safety Precautions Before YOU Throw Away Your OLD Refrigerator Or FreezerTo Connect ELECTRiCiTY Electrical Shock Hazard USE of Extension CordsIceBin Excessive Weight Hazard Excessive Weight HazardTo remove the base grllle Base Grille iNSTALLATiONPrior to USE To replace the base grllleDoor Handle Replacing Freezer Drawer Handle HOW to Remove Freezer Door HandleRemoving Freezer Drawer Handle To remove the right refrigerator door Removing and ReplacingTo remove the left refrigerator door Left Door HOW to Remove the Freezer Drawers Bottom Freezer DrawerHOW to iNSTALL the Freezer Drawers Top Freezer DrawerDoor Allgnment Leveling and Door AlignmentLeveling Dispenser Setting the ControlsAirflow Ultra iceDemo Mode For Store Use Only Door AlarmTemperature Mode Switch Function F =C Energy SaverMFL62184418 DDDDD.Jndd 2011.4.7 115417 AM Automatic Icemaker Normal Sounds YOU MAY Hear When YOU should SET the Icemaker Power Switch to OFF OAutomatic Icemaker Preparing for VacationEggs Store in the original wrappingMilk VegetablesWater Dispenser Dispenser PushAdjusting Shelves Cantilever Foldlng Shelf on some modelsGlide NServe Control Removing and installlng the humidity controlled crisperHUMiDiTY Controlled Crisper To remove and replace Glide NServeExtra iCE BiN Freezer SectionDairy BiN DurabaseWater Filter Water Filter Bypass PlugPerformance Data Sheet ReportMFL62184418 DDDDD.indd 2011.4.7 3722 PM Water Treatment Device Certificate Number Exterior General Cleaning TipsExplosion Hazard Door Liners and GasketsWhen YOU Move Light Bulb Replacement Power InterruptionsWhen YOU GO on Vacation Change Freezer Compartment Light BulbWhat YOU will Need Power drillWater Pressure Compression fitting Shutoff valve to connectOutlet Shut OFF the Main Water SupplyInlet End Connect the Tubing to the Refrigerator Start the IcemakerOperating Cooling40-120 Not coolingSection Supply valve SettingsSealed Supply lineICE & Water Doors are not closed completelyConnected Water supply or the supply shutoffSupply As sulfur SeveralSystem Control will click whenOperation Parts & Features Managemylife

795.7109 specifications

The Kenmore 795.7109 refrigerator is a standout appliance in the realm of modern kitchen technology, combining innovative features and aesthetics to enhance any household. Known for its reliable performance and spacious design, this fridge brings together essential functionalities with cutting-edge technologies.

One of the main features of the Kenmore 795.7109 is its French door design, which not only offers a sleek and contemporary appearance but also maximizes access to stored items. With a generous capacity, it accommodates a large volume of food and beverages, making it an ideal choice for families or individuals who enjoy entertaining.

A significant technology incorporated into the Kenmore 795.7109 is the SmartSense temperature management system. This advanced feature uses multiple sensors to monitor and maintain optimal cooling conditions throughout the refrigerator and freezer compartments. By constantly adjusting temperatures in response to changes, the SmartSense system ensures food stays fresh for longer periods.

Another noteworthy aspect of the Kenmore 795.7109 is its energy efficiency. It is designed to meet stringent energy use guidelines, which helps reduce electricity bills while minimizing environmental impact. This makes it an eco-friendly choice for consumers who are conscious of energy consumption.

The refrigerator also includes a water and ice dispenser, providing convenient access to filtered water and fresh ice cubes. The dispenser is designed for easy use, allowing for quick filling of bottles and pitchers without the need to open the fridge. The interior features adjustable shelves and bins, providing customizable storage options to organize groceries effectively.

In addition to storage and efficiency features, the Kenmore 795.7109 is equipped with advanced filtration systems that ensure clean drinking water by removing impurities. This feature gives peace of mind to families, knowing that their drinking water is safe and tastes great.

Overall, the Kenmore 795.7109 refrigerator strikes a harmonious balance between functionality, technology, and style. Its array of features, such as SmartSense temperature management, energy efficiency, and convenient ice and water access, make it a valued addition to any kitchen. Whether for its spacious interior or its sophisticated design, it exemplifies quality and reliability in the world of home appliances.
Top Page Image Contents