Assembly, Using Your Unit | Weed Eater 952711329, XT110S, SG14, SG10

Tools built with this insulation system are not intended to be grounded. No ground- ing means is provided on this unit, nor should a means of grounding be added to this unit. As a result, the extension cord used with your unit can be plugged into any standard 120 volt electrical out- let.

Safety precautions must be observed when operating any electrical tool. The double insulation system only provides added protection against injury resulting from an internal electrical insulation failure.

WARNING: All electrical repairs to this unit, including housing, switch, mo- tor, etc., must be diagnosed and repaired by qualified service personnel. Replace- ment parts for a double insulated ap- pliance must be recommended by the manufacturer. A double insulated ap- pliance is marked with the words “double insulation” or “double insulated.” the symbol (square within a square) may also be marked on the appliance. Failure to have the unit repaired by qualified ser- vice personnel can cause the double in- sulation construction to become ineffec- tive and result in serious injury.

SAVE THESE INSTRUCTIONS

ASSEMBLY

WARNING: If you receive your unit assembled, check each step to insure your unit is properly assembled. Follow all safety information in the manual and on unit.

WARNING: The shield must be properly installed. The shield provides partial protection from the risk of thrown objects to the operator and others. Your unit is equipped with a line limiter blade, which cuts excess line to the proper length while running. The line limiter blade (on underside of shield) is sharp and can cut you.

NOTE: If shield is not properly installed, damage to unit (including motor failure) will result.

ALIGN INSTALLATION ARROWS

Twist shield in direction of arrow to assemble

CAUTION: Sharp line limiter blade

Place handle in comfortable position and tighten securely.

NOTE: SG & XT units are equipped with an extendable tube. Extend the tube until it snaps into place. Without the tube fully extended the Twist ’N Edge feature on the XT series will not operate.

Extendable tube (Some models)

CAUTION: The tube must be fully ex- tended for the unit to operate correctly.

USING YOUR UNIT

Use only a voltage supply as specified on your unit.

SELECT AN EXTENSION CORD

Extension Cord Gauge Chart

Length of Cord		Gauge
25	Ft. (7.5 m)	18 Gauge
50	Ft. (15 m)	16 Gauge
100 Ft. (30 m)		16 Gauge

Extension cords are available for this unit.

ATTACH THE EXTENSION

CORD TO YOUR TRIMMER

Loop your extension cord through the handle and around the hook. Insure the plug and cord are firmly and fully en- gaged.

952711351, 952711333, 952711767, 952711353, 545186763 specifications

The Weed Eater XT110S, SG14, and SG10 models are renowned for their reliability, efficiency, and versatility in maintaining residential landscapes. Each of these trimmers is designed to cater to different needs, making them ideal for DIY homeowners and landscaping professionals alike.

The XT110S is an exceptional choice for light to medium-duty trimming. It boasts a 25cc 2-cycle engine, which strikes a perfect balance between power and weight. The engine is engineered for easy starting and smooth operation, minimizing user fatigue during long trimming sessions. Weighing only around 9 pounds, the XT110S allows for extended use without straining the operator. The dual line bump head provides efficient cutting while allowing you to easily reload the trimmer line when needed. Additionally, the XT110S features an adjustable handle that enhances user comfort and control.

The SG14 and SG10, on the other hand, are part of Weed Eater's string trimmers specifically designed for tackling larger areas and tougher grasses. The SG14 model is equipped with a powerful 14-inch cutting swath, making it effective for larger yards. It also has a durable, lightweight design that allows for maneuverability without sacrificing performance. This trimmer comes fitted with a 2-cycle engine similar to that of the XT110S, ensuring reliable power and performance. The SG14's ergonomic design includes a padded grip handle, providing comfort during prolonged use.

Meanwhile, the SG10 model is a compact and efficient option for smaller landscaping tasks. With a 10-inch cutting diameter and a smaller, lighter frame, the SG10 is ideal for tight spaces and intricate trimming tasks – perfect for residential gardens and flower beds. Featuring a quick and easy line feed system, users can easily reload the trimmer line without the hassle of disassembly.

Both the SG14 and SG10 models incorporate advanced cutting technologies, ensuring that users can tackle dense vegetation with ease. Their redesigned trimmer heads allow for enhanced durability and improved cut accuracy, contributing to a cleaner and more professional finish.

The parts numbers 952711328 and 952711333 refer to specific replacement parts and accessories for the Weed Eater line, ensuring that owners can maintain and repair their equipment efficiently.

In summary, the Weed Eater XT110S, SG14, and SG10 trimmers showcase impressive features, innovative technologies, and durable construction, making them essential tools for anyone serious about maintaining a beautiful outdoor space. Whether you need light trimming or heavy-duty work, these models provide the power and performance necessary to keep your landscape looking pristine.