Service, Storage, Need ASSISTANCE? | Weed Eater 952711325, XT110S

SERVICE

REPLACING THE LINE

SDisconnect unit from the power source. S Remove the spool by firmly pulling on

the tap button.

S Clean entire surface of hub and spool. S Replace with a pre-wound spool, or cut a length of 30 feet of 0.065 diameter WEED EATER brand line. Use of heavi- er line could overload and damage the unit. Never use wire, rope, string, etc., which can break off and become a dan-

gerous missile.

S Insert one end of the line about 1/2 inch (1 cm) into the small slot inside the spool.

Small

Hole

Spool

S Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

SPush the line into the notch, leaving 3

to 5 inches (7 -- 12 cm) unwound.

S Insert the line into the exit hole in the hub as shown in the illustration.

Line in

Notch

Hub	Line exit hole

SAlign the notch with the line exit hole. S Push the spool into the hub until it snaps into place, while keeping light

tension on the end of the line.

S Pull on the line extending outside of the hub to release it from the notch; other- wise, the unit will not function properly.

STORAGE

WARNING: Perform the following steps after each use.

SStop the unit and disconnect the power

source when not in use.

SCarry the unit with motor stopped.

S Store the unit so the line limiter blade cannot cause injury.

SStore unit and extension cord indoors

in a high, dry place out of the reach of children. Store unit unplugged.

SStore unit with all guards in place. Posi- tion unit so that any sharp object can- not accidentally cause injury.

NEED ASSISTANCE?

For assistance, or a replacement part call: 1-800-554-6723.

Safety Glasses	952701645
Spool with 30’ line	952701663
50’ coil of bulk line.	952701550
100’ coil of line.	952701533
200’ coil of line.	952701594

952711351, 952711333, 952711767, 952711353, 545186763 specifications

The Weed Eater XT110S, SG14, and SG10 models are renowned for their reliability, efficiency, and versatility in maintaining residential landscapes. Each of these trimmers is designed to cater to different needs, making them ideal for DIY homeowners and landscaping professionals alike.

The XT110S is an exceptional choice for light to medium-duty trimming. It boasts a 25cc 2-cycle engine, which strikes a perfect balance between power and weight. The engine is engineered for easy starting and smooth operation, minimizing user fatigue during long trimming sessions. Weighing only around 9 pounds, the XT110S allows for extended use without straining the operator. The dual line bump head provides efficient cutting while allowing you to easily reload the trimmer line when needed. Additionally, the XT110S features an adjustable handle that enhances user comfort and control.

The SG14 and SG10, on the other hand, are part of Weed Eater's string trimmers specifically designed for tackling larger areas and tougher grasses. The SG14 model is equipped with a powerful 14-inch cutting swath, making it effective for larger yards. It also has a durable, lightweight design that allows for maneuverability without sacrificing performance. This trimmer comes fitted with a 2-cycle engine similar to that of the XT110S, ensuring reliable power and performance. The SG14's ergonomic design includes a padded grip handle, providing comfort during prolonged use.

Meanwhile, the SG10 model is a compact and efficient option for smaller landscaping tasks. With a 10-inch cutting diameter and a smaller, lighter frame, the SG10 is ideal for tight spaces and intricate trimming tasks – perfect for residential gardens and flower beds. Featuring a quick and easy line feed system, users can easily reload the trimmer line without the hassle of disassembly.

Both the SG14 and SG10 models incorporate advanced cutting technologies, ensuring that users can tackle dense vegetation with ease. Their redesigned trimmer heads allow for enhanced durability and improved cut accuracy, contributing to a cleaner and more professional finish.

The parts numbers 952711328 and 952711333 refer to specific replacement parts and accessories for the Weed Eater line, ensuring that owners can maintain and repair their equipment efficiently.

In summary, the Weed Eater XT110S, SG14, and SG10 trimmers showcase impressive features, innovative technologies, and durable construction, making them essential tools for anyone serious about maintaining a beautiful outdoor space. Whether you need light trimming or heavy-duty work, these models provide the power and performance necessary to keep your landscape looking pristine.