Maintenance, Before Each USE, After Each USE

CORRECT OPERATING POSITION

(XT & TE)

TrimmingEdging

WARNING: Always wear eye pro- tection. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

When operating unit, stand as shown and check for the following:

SWear eye protection and heavy clothing. S Hold trigger handle with right hand and

assist handle with left hand. S Keep unit below waist level.

S Cut from your right to your left to ensure debris is thrown away from you. With- out bending over, keep line near and parallel to the ground (perpendicular when edging) and not crowded into material being cut.

ADJUSTING UPPER HANDLE

(XT Series only)

SPress button located on the underside of the upper handle and extend handle to a comfortable position.

Button

ADVANCING THE CUTTING LINE

To advance the line, tap the bottom of the cutting head on the ground while the trim- mer is running at full speed. The metal blade attached to the shield will cut the line to the proper length.

	TAP
	Cutting
Metal Blade	Head
Metal Blade

TWIST ‘N EDGEr FEATURE

XT & TE series units are equipped with a button on the side of the unit. If your unit includes this feature you can press this button and twist the lower portion 180_ counterclockwise into an edging posi- tion.

Twist ‘N Edge Button

MAINTENANCE

WARNING: Disconnect power source before performing maintenance.

GENERAL RECOMMENDATIONS The warranty on this unit does not cover items that have been subjected to opera- tor abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjustments will need to be made periodically to properly main- tain your unit.

BEFORE EACH USE

CHECK FOR LOOSE FASTENERS AND PARTS

SHousing Screws S Assist Handle S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for replacement of damaged or worn parts. S Trigger Switch -- Ensure switch func- tions properly by pressing and releas- ing the trigger switch. Make sure motor

stops.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

AFTER EACH USE

INSPECT AND CLEAN UNIT AND LA- BELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit using a damp cloth with a mild de- tergent.

SWipe off unit with a clean dry cloth.

952711351, 952711333, 952711767, 952711353, 545186763 specifications

The Weed Eater XT110S, SG14, and SG10 models are renowned for their reliability, efficiency, and versatility in maintaining residential landscapes. Each of these trimmers is designed to cater to different needs, making them ideal for DIY homeowners and landscaping professionals alike.

The XT110S is an exceptional choice for light to medium-duty trimming. It boasts a 25cc 2-cycle engine, which strikes a perfect balance between power and weight. The engine is engineered for easy starting and smooth operation, minimizing user fatigue during long trimming sessions. Weighing only around 9 pounds, the XT110S allows for extended use without straining the operator. The dual line bump head provides efficient cutting while allowing you to easily reload the trimmer line when needed. Additionally, the XT110S features an adjustable handle that enhances user comfort and control.

The SG14 and SG10, on the other hand, are part of Weed Eater's string trimmers specifically designed for tackling larger areas and tougher grasses. The SG14 model is equipped with a powerful 14-inch cutting swath, making it effective for larger yards. It also has a durable, lightweight design that allows for maneuverability without sacrificing performance. This trimmer comes fitted with a 2-cycle engine similar to that of the XT110S, ensuring reliable power and performance. The SG14's ergonomic design includes a padded grip handle, providing comfort during prolonged use.

Meanwhile, the SG10 model is a compact and efficient option for smaller landscaping tasks. With a 10-inch cutting diameter and a smaller, lighter frame, the SG10 is ideal for tight spaces and intricate trimming tasks – perfect for residential gardens and flower beds. Featuring a quick and easy line feed system, users can easily reload the trimmer line without the hassle of disassembly.

Both the SG14 and SG10 models incorporate advanced cutting technologies, ensuring that users can tackle dense vegetation with ease. Their redesigned trimmer heads allow for enhanced durability and improved cut accuracy, contributing to a cleaner and more professional finish.

The parts numbers 952711328 and 952711333 refer to specific replacement parts and accessories for the Weed Eater line, ensuring that owners can maintain and repair their equipment efficiently.

In summary, the Weed Eater XT110S, SG14, and SG10 trimmers showcase impressive features, innovative technologies, and durable construction, making them essential tools for anyone serious about maintaining a beautiful outdoor space. Whether you need light trimming or heavy-duty work, these models provide the power and performance necessary to keep your landscape looking pristine.