Unit Safety, Cutting Safety | Weed Eater 952711326, XT110S, SG14

electrical rating not less than the rating of unit. Cord must be marked with suf- fix “W--A” (in Canada “W”). Make sure your extension cord is in good condi- tion. Inspect extension cord before use and replace if damaged. Do not use a damaged cord. Cord insulation must be intact with no cracks or deteriora- tion. Plug connectors must be undam- aged. An undersized extension cord will cause a drop in line voltage result- ing in loss of power and overheating. If in doubt, use the next heavier gauge. The lower the gauge number, the heavier the cord (see SELECT AN EX- TENSION CORD). Do not use multiple cords.

SDo not abuse cord. Never carry the unit

by the extension cord or yank exten- sion cord to disconnect unit.

S Use cord retainer to prevent discon- nection of extension cord from unit. See ATTACH THE EXTENSION CORD TO YOUR TRIMMER in the OPERATION sec- tion.

S Do not use the unit if the switch does not turn the unit on and off properly. Re- pairs to the switch must be made by your authorized service dealer.

SKeep the extension cord clear of oper- ator and obstacles at all times. Do not expose cords to heat, oil, water, or

sharp edges.

S To avoid the possibility of electric shock, avoid body contact with any grounded conductor, such as metal fences or pipes.

SGround Fault Circuit Interrupter (GFCI) protection should be provided on cir- cuit or outlet to be used. Receptacles are available having built-in GFCI protection and may be used for this measure of safety.

UNIT SAFETY

SInspect unit before use. Replace dam- aged parts. Make sure all handles, guards, and fasteners are in place and securely fastened. Parts that are dam- aged must be repaired or replaced by an authorized service dealer. This in- cludes head parts that are cracked, or chipped, guards, and any other part

that is damaged.

SDo not repair unit yourself.

S Use only 0.065” (1.65 mm) diameter recommended trimmer line (see ACCE- SORIES). Never use wire, rope, string, etc.

S Use specified trimmer spool. Make sure spool is properly installed and all parts are securely fastened.

SUse only recommended WEED EATER replacement parts and accessories.

CUTTING SAFETY

SInspect area to be cut. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown or become entangled in cutting head.

S Do not overreach or stand on unstable support. Keep firm footing and balance.

SKeep the cutting head below waist lev-

el. Do not raise handles above your waist. Cutting head can come danger- ously close to your body.

SKeep away from cutting head and spin- ning line.

S Use unit properly. Use only for trim- ming, edging, and mowing. Do not force unit; it will do the job better and with less risk of injury at the rate for which it was designed.

SUse only in daylight or in good artificial light.

MAINTENANCE SAFETY

WARNING: Disconnect unit from the power supply before performing maintenance, or when changing trimmer line.

S Maintain unit according to recom- mended procedures. Keep cutting line at proper length. Follow instructions for changing trimmer line.

SHave all service and maintenance not explained in this manual performed by

an authorized service dealer to avoid creating a hazard.

SNever douse or squirt the unit with water or any other liquid. Clean unit and labels with a damp sponge. Keep handles dry, clean, and free from oil and grease.

SKeep the air vents clean and free from debris to avoid overheating the motor. Clean after each use.

TRANSPORTING AND STORAGE

SStop the unit and disconnect the power

source when not in use.

SCarry the unit with motor stopped.

S Store the unit so that the line limiter blade (on underside of shield) cannot cause injury.

SStore unit indoors in a high, dry place out of the reach of children. Store unit unplugged.

DOUBLE INSULATION

CONSTRUCTION

This unit is double insulated to help pro- tect against electric shock. Double in- sulation construction consists of two separate “layers” of electrical insulation instead of grounding.

952711351, 952711333, 952711767, 952711353, 545186763 specifications

The Weed Eater XT110S, SG14, and SG10 models are renowned for their reliability, efficiency, and versatility in maintaining residential landscapes. Each of these trimmers is designed to cater to different needs, making them ideal for DIY homeowners and landscaping professionals alike.

The XT110S is an exceptional choice for light to medium-duty trimming. It boasts a 25cc 2-cycle engine, which strikes a perfect balance between power and weight. The engine is engineered for easy starting and smooth operation, minimizing user fatigue during long trimming sessions. Weighing only around 9 pounds, the XT110S allows for extended use without straining the operator. The dual line bump head provides efficient cutting while allowing you to easily reload the trimmer line when needed. Additionally, the XT110S features an adjustable handle that enhances user comfort and control.

The SG14 and SG10, on the other hand, are part of Weed Eater's string trimmers specifically designed for tackling larger areas and tougher grasses. The SG14 model is equipped with a powerful 14-inch cutting swath, making it effective for larger yards. It also has a durable, lightweight design that allows for maneuverability without sacrificing performance. This trimmer comes fitted with a 2-cycle engine similar to that of the XT110S, ensuring reliable power and performance. The SG14's ergonomic design includes a padded grip handle, providing comfort during prolonged use.

Meanwhile, the SG10 model is a compact and efficient option for smaller landscaping tasks. With a 10-inch cutting diameter and a smaller, lighter frame, the SG10 is ideal for tight spaces and intricate trimming tasks – perfect for residential gardens and flower beds. Featuring a quick and easy line feed system, users can easily reload the trimmer line without the hassle of disassembly.

Both the SG14 and SG10 models incorporate advanced cutting technologies, ensuring that users can tackle dense vegetation with ease. Their redesigned trimmer heads allow for enhanced durability and improved cut accuracy, contributing to a cleaner and more professional finish.

The parts numbers 952711328 and 952711333 refer to specific replacement parts and accessories for the Weed Eater line, ensuring that owners can maintain and repair their equipment efficiently.

In summary, the Weed Eater XT110S, SG14, and SG10 trimmers showcase impressive features, innovative technologies, and durable construction, making them essential tools for anyone serious about maintaining a beautiful outdoor space. Whether you need light trimming or heavy-duty work, these models provide the power and performance necessary to keep your landscape looking pristine.