Toro Official Lawn Mower Manual: Deck Adjustments for Optimal Performance
Page 18

SECTION 8: MAKING ADJUSTMENTS

WARNING: Never attempt to make any adjustments while the engine is running,

Leveling the Deck

•Retighten the two lock nuts against the inner hex nuts when proper adjustment is achieved.

Side to Side

If the cutting deck appears to be mowing unevenly, a side to side adjustment can be performed. Adjust if necessary as follows:

NOTE: Check

the

tractor’s

tire pressure before

• With the tractor parked on a firm, level surface,

performing any

deck

leveling

adjustments. Refer to

place the deck lift lever in the top notch (highest

Tires on page 25 for information regarding tire pressure.

position) and rotate both blades so that they are

 

 

 

 

Front To Rear

 

 

 

perpendicular with the tractor.

The front of the cutting deck is supported by a stabilizer

• Measure the distance from the outside of the left

blade tip to the ground and the distance from the

bar that can adjusted to level the deck from front to rear.

outside of the right blade tip to the ground. Both

The front of the deck should be between 1/4-inch and

measurements taken should be equal. If they’re

3/8-inch lower than the rear of the deck. Adjust if

not, proceed to the next step.

necessary as follows:

 

 

 

 

• Loosen, but do NOT remove, the hex bolt on the left

• With the tractor parked on a firm, level surface,

deck hanger bracket. See Figure 9.

place the deck lift lever in the top notch (highest

 

position) and rotate the blade nearest the discharge

 

chute so that it is parallel with the tractor.

 

• Measure the distance from the front of the blade tip

 

to the ground and the rear of the blade tip to the

 

ground.

 

 

 

 

• The first measurement taken should be between

 

1/4" and 3/8" less than the second measurement.

 

• Determine the approximate distance necessary for

 

proper adjustment and proceed, if necessary, to the

 

next step.

 

 

 

 

• From the front of the tractor, loosen the outermost

 

hex lock nut on the end of the deck hanger rod. See

 

Figure 8.

 

 

 

 

• Tighten the inner hex nut front against the front

Adjustment Gear

hanger bracket to raise the front of the deck; loosen

Hex Bolt

the hex nut to lower the front of the deck. See

 

Figure 8.

 

 

 

Figure 9

 

 

 

 

 

 

 

 

• Balance the deck by using a wrench to turn the

 

 

 

 

adjustment gear (See Figure 9) up or down.

 

 

 

 

• The deck is properly balanced when both blade tip

 

 

 

 

measurements taken earlier are equal.

 

 

 

 

• Retighten the hex bolt on the left deck hanger

 

 

 

 

bracket when proper adjustment is achieved.

 

 

Figure 8

 

 

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents LX500 Lawn Tractor Table of Contents Important Safe Operation Practices General OperationSlope Operation Children General Service Safety Labels Keep Hands and Feet Away from Rotating PartsInstructional Labels Slope Gauge —Shipping Brace Removal Attaching the Battery CablesGas and Oil Fill-up Tire PressureSetting the Gauge Wheels Know Your Lawn Tractor Choke Control Ignition Switch ModuleThrottle Control Brake PedalElectric PTO Blade Engage Knob Cruise Control LeverParking Brake Lever Safety Interlock System Reverse Caution ModeOperating Your Lawn Tractor Driving The Tractor Using the Deck Lift LeverStarting the Engine Stopping the EngineEngaging the Parking Brake Setting The Cruise ControlMowing Engaging the PTO BladesMaking Adjustments Leveling the DeckSide to Side Parking Brake Adjustment Steering AdjustmentSeat Adjustment Engine Oil Maintaining Your Lawn TractorEngine Checking the Oil LevelChanging the Oil Filter Changing the Engine OilDraining the Oil Re-filling the Crankcase with OilAir Filter PrecleanerService Paper Element Spark PlugsCleaning the Engine And Deck LubricationFuse ServiceTires Cutting BladesJump Starting BatteryCutting Deck Removal ChargingLX500 Changing the Deck BeltOFF-SEASON Storage Maintenance Chart Troubleshooting Trouble Possible Causes Corrective ActionSpecifications Engine Air-cooled, 4-cyclePage Page Page Evaporative Emission Control Warranty Statement IntroductionToro Company

LX500 specifications

The Toro LX500 is a highly regarded riding lawn mower that combines power, comfort, and cutting-edge technology to deliver a premium lawn care experience. Designed for homeowners with medium to large yards, the LX500 stands out in the crowded market of garden equipment with its robust features and user-friendly design.

One of the main characteristics of the LX500 is its powerful engine. It typically comes equipped with a reliable 500cc engine, providing more than enough power for tackling tough mowing tasks. The engine is designed for durability, ensuring longevity and efficient performance. Its high output allows users to handle even overgrown grass with ease, making it a versatile option for various lawn conditions.

The cutting deck of the Toro LX500 offers a generous cutting width, often around 50 inches, which enables users to cover more ground in less time. The deck is crafted from high-quality materials, ensuring durability as well as superior cut quality. With multiple cutting height adjustments, users can customize the mower to achieve the desired grass length, enhancing their lawn’s appearance.

Comfort is a significant focus in the design of the LX500, as it features an ergonomic seat equipped with armrests and adjustable settings. This emphasis on user comfort allows for longer mowing sessions without fatigue. Additionally, it incorporates a smooth steering system, making maneuvering around obstacles and tight spaces less challenging.

The Toro LX500 also incorporates advanced technologies, such as the Smart Speed control system, allowing users to adjust the speed of the mower based on the task at hand. This feature ensures maximum efficiency whether mowing, towing, or handling other yard tasks. Furthermore, the mower is designed for easy maintenance, with accessible components for oil changes, filter replacements, and blade sharpening.

Another notable feature is the inclusion of a washout port for the mower deck, which simplifies the cleaning process and helps maintain performance. This ensures that grass clippings and debris don’t accumulate, leading to a clean cut every time.

Overall, the Toro LX500 represents a well-balanced combination of power, efficiency, and comfort, making it a worthy investment for anyone looking to maintain a beautiful lawn efficiently. With its robust features and user-focused design, it is poised to meet the demands of modern lawn care.
Top Page Image Contents