Toro LX500 manual Service, Tires, Fuse, Cutting Blades

Page 25

SECTION 10: SERVICE

WARNING: Before servicing, repairing, or inspecting, always disengage PTO, set parking brake, stop engine and remove key to prevent unintended starting.

Tires

WARNING: Never exceed the maximum inflation pressure shown on the sidewall of the tire.

The recommended operating tire pressure is approximately 10 psi for the rear tires and 14 psi for the front tires. Do not overinflate. Uneven tire pressure could cause the cutting deck to mow unevenly.

Fuse

A 20 amp fuse is installed in your tractor’s wiring harness to protect the tractor’s electrical system from damage caused by excessive amperage.

If the electrical system does not function, or your tractor’s engine will not crank, first check to be certain that the fuse has not blown.

It can be found under the hood mounted between the dash panel and fuel tank on the right-hand support bar.

IMPORTANT: Always use a 20 amp fuse for replacement.

Cutting Blades

WARNING: Be sure to shut the engine off, and remove ignition key to prevent unintended starting before removing the cutting blade(s) for sharpening or replacement. Protect your hands by using heavy gloves when grasping the blade.

WARNING: Periodically inspect the blade adapter and/or spindle for cracks or damage, especially if you strike a foreign object. Replace immediately if damaged.

The blades may be removed as follows.

•Remove the deck from beneath the tractor, (refer to Cutting Deck Removal on page 26) then carefully flip the deck over to expose its underside.

•Place a block of wood between the center deck housing baffle and the cutting blade to act as a stabilizer. See Figure 17.

•Use a 1-1/8" wrench to remove the hex flange nut that secures the blade to the spindle assembly. See Figure 17.

Hex Flange Nut

Wood Block

Spindle Assembly

Figure 17

•To properly sharpen the cutting blades, remove equal amounts of metal from both ends of the blades along the cutting edges, parallel to the trailing edge, at a 25° to 30° angle.

Damaged Blade Edge

Seperation

Figure 18

IMPORTANT: If the cutting edge of the blade has already been sharpened, or if any metal separation is present, replace the blades with new ones.

It is important that each cutting blade edge be ground equally to maintain proper blade balance. A poorly balanced blade will cause excessive vibration and may cause damage to the tractor and result in personal injury. The blade can be tested by balancing it on a round shaft screwdriver. Grind metal from the heavy side until it balances evenly.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents LX500 Lawn Tractor Table of Contents General Operation Important Safe Operation PracticesSlope Operation Children General Service Keep Hands and Feet Away from Rotating Parts Safety LabelsInstructional Labels — Slope GaugeGas and Oil Fill-up Attaching the Battery CablesShipping Brace Removal Tire PressureSetting the Gauge Wheels Know Your Lawn Tractor Throttle Control Ignition Switch ModuleChoke Control Brake PedalCruise Control Lever Electric PTO Blade Engage KnobParking Brake Lever Reverse Caution Mode Safety Interlock SystemOperating Your Lawn Tractor Starting the Engine Using the Deck Lift LeverDriving The Tractor Stopping the EngineMowing Setting The Cruise ControlEngaging the Parking Brake Engaging the PTO BladesLeveling the Deck Making AdjustmentsSide to Side Steering Adjustment Parking Brake AdjustmentSeat Adjustment Engine Maintaining Your Lawn TractorEngine Oil Checking the Oil LevelDraining the Oil Changing the Engine OilChanging the Oil Filter Re-filling the Crankcase with OilService Paper Element PrecleanerAir Filter Spark PlugsLubrication Cleaning the Engine And DeckTires ServiceFuse Cutting BladesCutting Deck Removal BatteryJump Starting ChargingChanging the Deck Belt LX500OFF-SEASON Storage Maintenance Chart Trouble Possible Causes Corrective Action TroubleshootingEngine Air-cooled, 4-cycle SpecificationsPage Page Page Introduction Evaporative Emission Control Warranty StatementToro Company

LX500 specifications

The Toro LX500 is a highly regarded riding lawn mower that combines power, comfort, and cutting-edge technology to deliver a premium lawn care experience. Designed for homeowners with medium to large yards, the LX500 stands out in the crowded market of garden equipment with its robust features and user-friendly design.

One of the main characteristics of the LX500 is its powerful engine. It typically comes equipped with a reliable 500cc engine, providing more than enough power for tackling tough mowing tasks. The engine is designed for durability, ensuring longevity and efficient performance. Its high output allows users to handle even overgrown grass with ease, making it a versatile option for various lawn conditions.

The cutting deck of the Toro LX500 offers a generous cutting width, often around 50 inches, which enables users to cover more ground in less time. The deck is crafted from high-quality materials, ensuring durability as well as superior cut quality. With multiple cutting height adjustments, users can customize the mower to achieve the desired grass length, enhancing their lawn’s appearance.

Comfort is a significant focus in the design of the LX500, as it features an ergonomic seat equipped with armrests and adjustable settings. This emphasis on user comfort allows for longer mowing sessions without fatigue. Additionally, it incorporates a smooth steering system, making maneuvering around obstacles and tight spaces less challenging.

The Toro LX500 also incorporates advanced technologies, such as the Smart Speed control system, allowing users to adjust the speed of the mower based on the task at hand. This feature ensures maximum efficiency whether mowing, towing, or handling other yard tasks. Furthermore, the mower is designed for easy maintenance, with accessible components for oil changes, filter replacements, and blade sharpening.

Another notable feature is the inclusion of a washout port for the mower deck, which simplifies the cleaning process and helps maintain performance. This ensures that grass clippings and debris don’t accumulate, leading to a clean cut every time.

Overall, the Toro LX500 represents a well-balanced combination of power, efficiency, and comfort, making it a worthy investment for anyone looking to maintain a beautiful lawn efficiently. With its robust features and user-focused design, it is poised to meet the demands of modern lawn care.
Top Page Image Contents