Children

1.Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. They do not understand the dangers. Never assume that children will remain where you last saw them.

a.Keep children out of the mowing area and in watchful care of a responsible adult other than the operator.

b.Be alert and turn machine off if a child enters the area.

c.Before and while backing, look behind and down for small children.

d.Never carry children, even with the blade(s) shut off. They may fall off and be seriously injured or interfere with safe machine operation.

e.Use extreme care when approaching blind corners, doorways, shrubs, trees or other objects that may block your vision of a child who may run into the machine.

f.To avoid back-over accidents, always disengage the cutting blade(s) before shifting into reverse. The “Reverse Caution Mode” should not be used when children or others are around.

g.Keep children away from hot or running engines. They can suffer burns from a hot muffler.

h.Remove key when machine is unattended to prevent unauthorized operation.

2.Never allow children under 14 years old to operate the machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

TOWING

1.Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

2.Follow the manufacturers recommendation for weight limits for towed equipment and towing on slopes.

3.Never allow children or others in or on towed equipment.

4.Do not tow heavy pull behind attachments (e.g. loaded dump cart, lawn roller, etc.) on slopes greater than 5 degrees. When going down hill, the extra weight tends to push the tractor and may cause you to loose control. (e.g. tractor may speed up, braking and steering ability are reduced, attachment may jack-knife and cause tractor to overturn).

5.Travel slowly and allow extra distance to stop.

6.On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

7.Do not shift to neutral and coast downhill.

SERVICE

SAFE HANDLING OF GASOLINE:

1.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

c.When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

d.Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

e.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

f.Never fuel machine indoors.

g.Never remove gas cap or add fuel while the engine is hot or running. Allow engine to cool at least two minutes before refueling.

h.Never over fill fuel tank. Fill tank to no more than1/2-inch below the bottom of the filler neck to allow space for fuel expansion.

i.Replace gasoline cap and tighten securely.

j.If gasoline is spilled, wipe it off the engine and equipment. Move unit to another area. Wait 5 minutes before starting the engine.

k.To reduce fire hazards, keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

l.Never store the machine or fuel container inside where there is an open flame, spark or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.

m.Allow a machine to cool at least 5 minutes before storing.

LX500 specifications

The Toro LX500 is a highly regarded riding lawn mower that combines power, comfort, and cutting-edge technology to deliver a premium lawn care experience. Designed for homeowners with medium to large yards, the LX500 stands out in the crowded market of garden equipment with its robust features and user-friendly design.

One of the main characteristics of the LX500 is its powerful engine. It typically comes equipped with a reliable 500cc engine, providing more than enough power for tackling tough mowing tasks. The engine is designed for durability, ensuring longevity and efficient performance. Its high output allows users to handle even overgrown grass with ease, making it a versatile option for various lawn conditions.

The cutting deck of the Toro LX500 offers a generous cutting width, often around 50 inches, which enables users to cover more ground in less time. The deck is crafted from high-quality materials, ensuring durability as well as superior cut quality. With multiple cutting height adjustments, users can customize the mower to achieve the desired grass length, enhancing their lawn’s appearance.

Comfort is a significant focus in the design of the LX500, as it features an ergonomic seat equipped with armrests and adjustable settings. This emphasis on user comfort allows for longer mowing sessions without fatigue. Additionally, it incorporates a smooth steering system, making maneuvering around obstacles and tight spaces less challenging.

The Toro LX500 also incorporates advanced technologies, such as the Smart Speed control system, allowing users to adjust the speed of the mower based on the task at hand. This feature ensures maximum efficiency whether mowing, towing, or handling other yard tasks. Furthermore, the mower is designed for easy maintenance, with accessible components for oil changes, filter replacements, and blade sharpening.

Another notable feature is the inclusion of a washout port for the mower deck, which simplifies the cleaning process and helps maintain performance. This ensures that grass clippings and debris don’t accumulate, leading to a clean cut every time.

Overall, the Toro LX500 represents a well-balanced combination of power, efficiency, and comfort, making it a worthy investment for anyone looking to maintain a beautiful lawn efficiently. With its robust features and user-focused design, it is poised to meet the demands of modern lawn care.