Toro LX500 manual Gas and Oil Fill-up, Shipping Brace Removal, Tire Pressure, Tools Required

Page 10

SECTION 5: TRACTOR SET-UP

Gas and Oil Fill-up

Use only clean, fresh (under 30 days old), unleaded gasoline. Fill tank to no more than 1/2 inch below the top of the filler neck to allow space for fuel expansion.

WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes, and other sources of ignition before filling the fuel tank.

Service the engine with gasoline and oil as instructed in the separate engine manufacturer’s Operator/Owner Manual packed with your tractor. Read instructions carefully.

Shipping Brace Removal

WARNING: Make sure the engine is off, set the parking brake and remove the ignition key before removing the shipping brace.

•Locate the shipping brace, if present, and warning tag found on the right side of the cutting deck.

•While holding the discharge chute with your left hand, remove the shipping brace with your right hand by grasping it between your thumb and index finger and rotating it clockwise.

Figure 1

WARNING: The shipping brace, used for packaging purposes only, must be removed and discarded before operating your tractor.

WARNING: The mowing deck is capable of throwing objects. Failure to operate the riding mower without the discharge cover in the proper operating position could result in serious personal injury and/or property damage.

Tire Pressure

WARNING: Maximum tire pressure under any circumstances is 30 psi. Equal tire pressure should be maintained at all times.

The tires on your unit may be over-inflated for shipping purposes. Reduce the tire pressure before operating the tractor. Recommended operating tire pressure is approximately 10 p.s.i for the rear tires & 14 p.s.i. for the front tires. Check sidewall of tire for maximum p.s.i.

Attaching the Battery Cables

Tools Required

(1) 7/16" wrench

WARNING: California Proposition 65

Warning: Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.

NOTE: Your tractor’s battery cables may have already be attached at the factory.

NOTE: The positive battery terminal is marked Pos.

(+). The negative battery terminal is marked Neg. (–).

•The positive cable (heavy red wire) is secured to the positive battery terminal (+) with a hex bolt and hex nut at the factory. Make certain that the rubber boot covers the terminal to help protect it from corrosion.

•Remove the hex bolt and hex nut from the negative cable.

•Remove the black plastic cover, if present, from the negative battery terminal and attach the negative cable (heavy black wire) to the negative battery terminal (–) with the bolt and hex nut.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents LX500 Lawn Tractor Table of Contents Important Safe Operation Practices General OperationSlope Operation Children General Service Safety Labels Keep Hands and Feet Away from Rotating PartsInstructional Labels Slope Gauge —Shipping Brace Removal Attaching the Battery CablesGas and Oil Fill-up Tire PressureSetting the Gauge Wheels Know Your Lawn Tractor Choke Control Ignition Switch ModuleThrottle Control Brake PedalCruise Control Lever Electric PTO Blade Engage KnobParking Brake Lever Reverse Caution Mode Safety Interlock SystemOperating Your Lawn Tractor Driving The Tractor Using the Deck Lift LeverStarting the Engine Stopping the EngineEngaging the Parking Brake Setting The Cruise ControlMowing Engaging the PTO BladesLeveling the Deck Making AdjustmentsSide to Side Parking Brake Adjustment Steering AdjustmentSeat Adjustment Engine Oil Maintaining Your Lawn TractorEngine Checking the Oil LevelChanging the Oil Filter Changing the Engine OilDraining the Oil Re-filling the Crankcase with OilAir Filter PrecleanerService Paper Element Spark PlugsCleaning the Engine And Deck LubricationFuse ServiceTires Cutting BladesJump Starting BatteryCutting Deck Removal ChargingLX500 Changing the Deck BeltOFF-SEASON Storage Maintenance Chart Troubleshooting Trouble Possible Causes Corrective ActionSpecifications Engine Air-cooled, 4-cyclePage Page Page Evaporative Emission Control Warranty Statement IntroductionToro Company

LX500 specifications

The Toro LX500 is a highly regarded riding lawn mower that combines power, comfort, and cutting-edge technology to deliver a premium lawn care experience. Designed for homeowners with medium to large yards, the LX500 stands out in the crowded market of garden equipment with its robust features and user-friendly design.

One of the main characteristics of the LX500 is its powerful engine. It typically comes equipped with a reliable 500cc engine, providing more than enough power for tackling tough mowing tasks. The engine is designed for durability, ensuring longevity and efficient performance. Its high output allows users to handle even overgrown grass with ease, making it a versatile option for various lawn conditions.

The cutting deck of the Toro LX500 offers a generous cutting width, often around 50 inches, which enables users to cover more ground in less time. The deck is crafted from high-quality materials, ensuring durability as well as superior cut quality. With multiple cutting height adjustments, users can customize the mower to achieve the desired grass length, enhancing their lawn’s appearance.

Comfort is a significant focus in the design of the LX500, as it features an ergonomic seat equipped with armrests and adjustable settings. This emphasis on user comfort allows for longer mowing sessions without fatigue. Additionally, it incorporates a smooth steering system, making maneuvering around obstacles and tight spaces less challenging.

The Toro LX500 also incorporates advanced technologies, such as the Smart Speed control system, allowing users to adjust the speed of the mower based on the task at hand. This feature ensures maximum efficiency whether mowing, towing, or handling other yard tasks. Furthermore, the mower is designed for easy maintenance, with accessible components for oil changes, filter replacements, and blade sharpening.

Another notable feature is the inclusion of a washout port for the mower deck, which simplifies the cleaning process and helps maintain performance. This ensures that grass clippings and debris don’t accumulate, leading to a clean cut every time.

Overall, the Toro LX500 represents a well-balanced combination of power, efficiency, and comfort, making it a worthy investment for anyone looking to maintain a beautiful lawn efficiently. With its robust features and user-focused design, it is poised to meet the demands of modern lawn care.
Top Page Image Contents