Murray 96017000700 manual To Operate Mower See Fig, To Operate on Hills, To Transport See Figs

Page 12

OPERATION

Reverse Operation System (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING! Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE ROS

•Move motion control lever to neutral (N) position.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

•Look down and behind before backing.

•Slowly move motion control lever to reverse (R) posi- tion to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

02828

TO OPERATE MOWER (See Fig. 7)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT

LIFT LEVER HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 7

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT (See Figs. 8)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attachment lift control.

•Pull freewheel control out and into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above proce- dure.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model Always Wear EYE Protection During OperationSafe Operation Practices for Ride-On Mowers General OperationII. Slope Operation Service III. ChildrenIV. Towing Table of Contents Contents of Hardware Pack Tools Required for Assembly To Remove Tractor from CartonBefore Removing Tractor from Skid Unpack CartonCheck Battery See Fig Install Mulcher Plate See If previously removedC O N V E R T T O B a G G I N G O R Discharging Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Using the ROS To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Purge TransmissionRunning Maintenance Tractor Blade Removal See FigTo Sharpen Blade See Fig Check Operator Presence SystemBattery EngineBelts Transaxle CoolingCleaning Clean AIR ScreenAIR Filter MufflerTo Install Mower See Fig To Remove Mower See FigTo Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check and Adjust Brake See Fig To Adjust BrakeTo Replace Motion Drive Belt See Fig To Check BrakeTransaxle Motion Control Lever Neutral Adjustment See Fig To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig To Remove Wheel for Repairs See FigTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbOther Fuel SystemEngine OIL CylindersTroubleshooting Points Problem Cause CorrectionEngine dies when Suggested Guide for Sighting Slopes for Safe Operation Customer Service Courtneypark Dr. East Mississauga, OntarioLimitée Garantie 6662-661-800-1Degrés Dépannage DE Guide Défectueux estRalenti Entreposage MoteurRéglages ET Révision MoteurCarrossage AVANT/ Roues DES ConvergenceDI LA DE L’ALIGNEMENT Régler Pour Vitesses DE Boîte LA DE MentgechanCourroie LA Remplacer Pour Frein LE Régler ET Contrôler PourTransmission DE MENTNETRAÎD’EN Courroie Acer Rempl Pour DE Boîtier LE Niveau DE Mettre PourTondeuse DE Lame DE MENTNETRAÎD’EN SedeutonFig la Voir Tondeuse LA Installer Pour Reglages ET RevisionTracteur Tondeuse LA Enlever PourLigne EN Installé D’ESSENCE Filtre Entretien’ALLUMAGE Bougie AIR À FiltreTransmission LA DE Refroidissement LubrificationTrapézoïdales Courroies 11 .FIGFig la Voir Lame LA Affiler Fig la Voir Lame LA EnleverEN Fonctionnement DE Système ET Recommandations LES GénéralesLubrification DE Tableau Utilisation Chaque AvantUtilisation Tonte DE ConseilsTransmission LA Purger 8b .FIGMoteur LE Démarrer DE Avant 8a .Fig les Voir Tracteur LE Transporter PourPentes LES Dans Utiliser Pour Tondeuse LA Utiliser PourGAZ DES Commande LA Utiliser Pour Teurtrac E R T O V R E S I L I T U T N E M M O CFig la Voir Arrêter Pour Fig la Voir Mentnetionsta DE Frein LE Engager Pour02829 ’EMBRAYAGE Montage Décharge LAOU Ramassage AU Convertir Pour Déchiqueteuse Plaque LA Installer Retirée Auparavant SIPA LA DE Tracteur LE Retirer Pour DU Tracteur LE Sortir Pour LE Pour Exigés Outils LESPalette LA DE Tracteur LE Retirer DE Avant ToncarMontar SIN Piezas ClésSommaire Client DU ResponsabilitésProduit DE Spécifications Entretien RemorquageEnfants Général EntretienLES Dans Fonctionnement PentesGénéral Fonctionnement Tracteurs des sécurité toute en l’utilisation pour ConseilsPelouse DE Tracteur Modèle Propriétaire DU Manuel

96017000700 specifications

Murray 96017000700 is a versatile outdoor power equipment known for its robust design and efficient performance. This model is primarily a push mower, making it an ideal choice for homeowners seeking reliable and powerful lawn maintenance tools. Its features and technologies are tailored to provide an effective mowing experience, making it a popular choice among gardening enthusiasts.

One of the standout features of the Murray 96017000700 is its powerful engine. It is equipped with a reliable gas-powered engine that ensures strong performance across various mowing conditions. This engine provides the necessary torque to tackle thick grass and uneven terrains, allowing users to achieve a clean and manicured lawn effortlessly.

The mower boasts a cutting deck that is designed for durability and efficiency. Constructed from high-quality materials, the deck is both lightweight and strong, which helps in providing longevity to the product. Its cutting width allows for efficient mowing of large areas in less time, reducing the effort needed for lawn maintenance.

Another significant characteristic of the Murray 96017000700 is its adjustable cutting height feature. Users can easily adjust the height of the mower's blades to suit different grass types and lengths, ensuring a consistent cut tailored to personal preferences. This flexibility is particularly advantageous during the growing season when grass may vary significantly in height.

The ergonomic design of the mower enhances user comfort and control. Its handle is designed for ease of use, making it simple to maneuver around garden beds, trees, and other obstacles. Additionally, the mower includes a reliable starting system that minimizes the effort required to get the engine running, allowing for a hassle-free mowing experience.

In terms of maintenance, the Murray 96017000700 is specifically designed for easy servicing. Routine checks can be conducted with minimum hassle, and the mower's components are accessible for any necessary repairs or replacements. This ease of maintenance ensures that the mower remains in top working condition for years.

Overall, the Murray 96017000700 stands out in the market for its combination of power, durability, and efficiency. With its user-friendly features and solid construction, it is a valuable addition to any homeowner’s gardening toolkit, making lawn care a manageable and straightforward task. Whether tackling small yards or larger lawns, this mower remains a reliable partner for maintaining lush and healthy grass.
Top Page Image Contents