Murray 425303x92B HOW to Remove the Battery, HOW to Clean the Battery, HOW to Charge the Battery

Page 25

MAINTENANCE

MAINTENANCE FREE BATTERY

HOW TO REMOVE THE BATTERY

To charge or clean the battery, remove the battery from the unit as follows.

WARNING: To prevent sparks, disconnect the black battery cable from the negative (–) terminal before you disconnect the red cable.

WARNING: The battery contains sulfuric acid which is harmful to the skin, eyes and clothing. If the acid gets on the body or clothing, wash with water.

1.Disconnect the black cable from the negative (–) terminal (Figure 19).

2.Disconnect the red cable from the positive (+) terminal.

3.Lift the battery tray and the battery out of the unit.

HOW TO CLEAN THE BATTERY

1.Remove the battery.

2.Wash the battery with a solution of one gallon of water and four tablespoons of baking soda (sodium bicarbonate). Make sure the solution does not get into the battery cells.

3.Clean the terminals and the ends of the cables with a wire brush.

4.Install the battery.

5.To prevent corrosion, apply grease to the battery terminals.

HOW TO CHARGE THE BATTERY

WARNING: When you charge the battery, do not smoke. Keep the battery away from any sparks. The fumes from the battery acid can cause an explosion.

1.Before you charge the battery, remove the battery.

2.To charge the battery, use a 12 volt battery charger. Charge at a rate of 6 amperes for 1 hour.

3.Install the battery.

WARNING: To prevent sparks, fasten the red cable to the positive (+) terminal before you connect the black cable.

4.Fasten the red cable to the positive (+) terminal with the fas- teners as shown.

5.Fasten the black cable to the negative (–) terminal with the fas- teners as shown.

 

Positive (+)

 

 

Terminal

 

Wing Nut

 

Red Cable

 

 

Carriage Bolt

 

 

Battery

Black Cable

 

Battery Tray

 

 

 

Carriage Bolt

Figure 19

 

 

F–030704L

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model Table of Contents Environmental Awareness OWNER’S InformationII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Before Mowing Steps to FollowInternational Pictorials Safety Warning PictorialsInternational Pictorials Control And Operating PictorialsAssembly AssemblyHOW to Assemble the Steering Wheel HOW to Install the SeatHOW to Assemble the Gauge Wheels HOW to Charge Maintenance Free Battery Maintenance Free BatteryHOW to Install the Battery Cables Check the Level of the Mower Housing HOW to Prepare the EngineIMPORTANT! Before YOU Start Mowing Check the TiresLocation of Controls OperationAttachments HOW to USE the Throttle ControlHOW to Drive Forward HOW to USE the Speed Control PedalHOW to Change Directions HOW to Drive in ReverseHOW to Change the Cutting Height HOW to SET the Parking BrakeHOW to Stop the Unit HOW to Transport the UnitHOW to Operate Automatic Drive Units on Hills HOW to Operate with the Mower HousingHOW to Operate on a Hill HOW to Stop on a HillBefore Starting the Engine HOW to Start the EngineCarburetor Check the OILMowing and Bagging Tips Operating TipsFrequency Maintenance Required Comments MaintenanceHOW to Check the Muffler General RecommendationsHOW to Sharpen the Blade HOW to Remove and Install the BladeInspect Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Drive Brake HOW to Check and Adjust the ClutchHOW to Clean the Battery HOW to Remove the BatteryHOW to Charge the Battery HOW to Check the Fuel Filter Where to LubricateHOW to Install the Mower Housing HOW to Remove the Mower HousingHOW to Adjust the Gauge Wheels HOW to Level the Mower Housing Engine Drive Belt Removal HOW to Replace Motion Drive BeltsTo install the engine drive belt, reverse the above steps Engine Drive Belt InstallationTransaxle Drive Belt Removal Transaxle Drive Belt InstallationHOW to Replace the Mower Drive Belt Front Wheel HOW to Install the WheelsHOW to Replace the Light Bulb HOW to Replace the FuseHOW to Clean the Mower Housing BatteryTrouble Shooting Chart 030704L MURRAY, INC. Lawn Mower Central Parts DistributorsChassis & Hood Repair PartsKey Description Motion Drive Key Steering Key Part Description Repair Parts Mower Housing Suspension Mower Housing Suspension Mower Housing 7601032 Repair Parts Engine Mount Engine Mount Repair Parts Electrical System Electrical System 030704L 030704L 030704L Index Grass Bagger Lawn Sweeper Snow BladeMulcher KIT Garden Tiller Mulcher KIT

425303x92B specifications

The Murray 425303x92B is a high-performance industrial equipment model known for its versatility and reliability in various applications. Designed with precision and engineered to meet the demands of modern industries, this model integrates advanced technologies and features to ensure optimal performance.

One of the standout characteristics of the Murray 425303x92B is its robust construction. Built from high-quality materials, this model can withstand harsh operational environments, making it suitable for use in sectors ranging from manufacturing to construction. Its durability ensures a long lifespan, reducing the need for frequent maintenance and replacements, which ultimately leads to increased operational efficiency.

In terms of technology, the Murray 425303x92B is equipped with an advanced control system that enhances user experience and operational precision. This system allows for real-time monitoring and adjustments, enabling operators to fine-tune performance based on specific operational needs. The user-friendly interface ensures that even less experienced personnel can quickly learn to operate the equipment efficiently.

Power efficiency is another significant feature of the Murray 425303x92B. The model is designed to minimize energy consumption while maximizing output. This not only helps to reduce operational costs but also aligns with contemporary environmental standards, making it an eco-friendly choice for businesses.

Additionally, the equipment is designed with safety in mind. It includes multiple safety features such as emergency stop buttons, overload protection, and fail-safes that help prevent accidents during operation. These features enhance the overall safety of the workplace and provide peace of mind for operators.

The Murray 425303x92B also boasts modular design elements, allowing for easy upgrades and customization. This flexibility means businesses can adapt the equipment to suit changing operational demands without the need for significant reinvestment in new machinery.

Overall, the Murray 425303x92B stands out in the competitive landscape of industrial equipment. With its combination of durability, advanced technology, power efficiency, and safety features, it provides a comprehensive solution for industries looking to enhance their productivity and operational capabilities. Whether used in a manufacturing line or on a construction site, this model is designed to deliver exceptional performance and reliability, making it a valuable asset to any organization.
Top Page Image Contents