Murray 425303x92B manual HOW to Replace the Fuse, HOW to Replace the Light Bulb, Engine, Battery

Page 35

MAINTENANCE

HOW TO REPLACE THE FUSE

If the fuse is blown, the engine will not start. The location of the fuse is next to the battery. Remove the fuse and replace with a automotive fuse (Figure 45).

Automotive Fuse

Figure 45

HOW TO REPLACE THE LIGHT BULB

1.Raise the tractor hood.

2.Turn the light socket until the tabs on the socket align with the notches in the bezel (Figure 46). Remove the light socket. Turn the light bulb and remove the bulb.

3.Install a new light bulb. Align the light socket with the notches in the bezel and turn the light socket to lock in position.

Bezel

Light Bulb

Light Socket

Figure 46

HOW TO CLEAN THE MOWER HOUSING

WARNING: Before you clean the mower housing, stop the engine and disconnect the wire to the spark plug.

Grass and other debris on top of the mower housing can keep the belt from working correctly. For safety and correct operation, frequently clean the top of the mower housing. Remove grass and debris from around the pulleys and other moving parts.

1.Move the lever for the blade rotation control to the ENGAGE position.

2.Clean the top of the mower housing.

3.Move the lever for the blade rotation control to the DISENGAGE position.

4.Again clean the top of the mower housing.

5.After you cut the grass, clean the bottom of the mower housing.

STORAGE (over 30 days)

At the end of each year, prepare the unit for storage as follows.

THE ENGINE

For storage information, see the the engine manufacturer’s instructions.

THE BATTERY

1.Remove the battery.

2.Clean the battery terminals of any deposits.

3.Charge the battery. See the instructions on “How To Prepare And Charge The Battery”.

4.Store the battery in a cool, dry place.

NOTE: After a long time in storage, charge the battery.

THE FUEL SYSTEM

WARNING: Do not drain the gasoline inside a build- ing or near a fire. Do not smoke because the fumes from the fuel can cause an explosion.

1.Start the engine.

2.Run the engine until the fuel tank and the carburetor are out of fuel and the engine stops.

3.After storage, make sure you use fresh fuel.

CLEAN THE UNIT

1.Clean the dirt and grass from the engine.

2.Clean the mower housing.

LUBRICATE THE UNIT

See the “Lubrication” instructions in this book.

F–030704L

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Model Table of Contents Environmental Awareness OWNER’S InformationII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Before Mowing Steps to FollowControl And Operating Pictorials Safety Warning PictorialsInternational Pictorials International PictorialsAssembly AssemblyHOW to Assemble the Gauge Wheels HOW to Install the SeatHOW to Assemble the Steering Wheel HOW to Install the Battery Cables Maintenance Free BatteryHOW to Charge Maintenance Free Battery Check the Tires HOW to Prepare the EngineCheck the Level of the Mower Housing IMPORTANT! Before YOU Start MowingLocation of Controls OperationAttachments HOW to USE the Throttle ControlHOW to Drive in Reverse HOW to USE the Speed Control PedalHOW to Drive Forward HOW to Change DirectionsHOW to Transport the Unit HOW to SET the Parking BrakeHOW to Change the Cutting Height HOW to Stop the UnitHOW to Stop on a Hill HOW to Operate with the Mower HousingHOW to Operate Automatic Drive Units on Hills HOW to Operate on a HillCheck the OIL HOW to Start the EngineBefore Starting the Engine CarburetorMowing and Bagging Tips Operating TipsGeneral Recommendations MaintenanceFrequency Maintenance Required Comments HOW to Check the MufflerInspect Blade HOW to Remove and Install the BladeHOW to Sharpen the Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Drive Brake HOW to Check and Adjust the ClutchHOW to Charge the Battery HOW to Remove the BatteryHOW to Clean the Battery HOW to Check the Fuel Filter Where to LubricateHOW to Install the Mower Housing HOW to Remove the Mower HousingHOW to Adjust the Gauge Wheels HOW to Level the Mower Housing Engine Drive Belt Removal HOW to Replace Motion Drive BeltsTo install the engine drive belt, reverse the above steps Engine Drive Belt InstallationTransaxle Drive Belt Removal Transaxle Drive Belt InstallationHOW to Replace the Mower Drive Belt Front Wheel HOW to Install the WheelsBattery HOW to Replace the FuseHOW to Replace the Light Bulb HOW to Clean the Mower HousingTrouble Shooting Chart 030704L MURRAY, INC. Lawn Mower Central Parts DistributorsChassis & Hood Repair PartsKey Description Motion Drive Key Steering Key Part Description Repair Parts Mower Housing Suspension Mower Housing Suspension Mower Housing 7601032 Repair Parts Engine Mount Engine Mount Repair Parts Electrical System Electrical System 030704L 030704L 030704L Index Mulcher KIT Lawn Sweeper Snow BladeGrass Bagger Mulcher KIT Garden Tiller

425303x92B specifications

The Murray 425303x92B is a high-performance industrial equipment model known for its versatility and reliability in various applications. Designed with precision and engineered to meet the demands of modern industries, this model integrates advanced technologies and features to ensure optimal performance.

One of the standout characteristics of the Murray 425303x92B is its robust construction. Built from high-quality materials, this model can withstand harsh operational environments, making it suitable for use in sectors ranging from manufacturing to construction. Its durability ensures a long lifespan, reducing the need for frequent maintenance and replacements, which ultimately leads to increased operational efficiency.

In terms of technology, the Murray 425303x92B is equipped with an advanced control system that enhances user experience and operational precision. This system allows for real-time monitoring and adjustments, enabling operators to fine-tune performance based on specific operational needs. The user-friendly interface ensures that even less experienced personnel can quickly learn to operate the equipment efficiently.

Power efficiency is another significant feature of the Murray 425303x92B. The model is designed to minimize energy consumption while maximizing output. This not only helps to reduce operational costs but also aligns with contemporary environmental standards, making it an eco-friendly choice for businesses.

Additionally, the equipment is designed with safety in mind. It includes multiple safety features such as emergency stop buttons, overload protection, and fail-safes that help prevent accidents during operation. These features enhance the overall safety of the workplace and provide peace of mind for operators.

The Murray 425303x92B also boasts modular design elements, allowing for easy upgrades and customization. This flexibility means businesses can adapt the equipment to suit changing operational demands without the need for significant reinvestment in new machinery.

Overall, the Murray 425303x92B stands out in the competitive landscape of industrial equipment. With its combination of durability, advanced technology, power efficiency, and safety features, it provides a comprehensive solution for industries looking to enhance their productivity and operational capabilities. Whether used in a manufacturing line or on a construction site, this model is designed to deliver exceptional performance and reliability, making it a valuable asset to any organization.
Top Page Image Contents