Murray 20-inch Push manual Assembly, Parts BAG Contents

Page 11

ASSEMBLY

Read and follow the assembly and adjustment instructions for your mower. All fasteners are in the parts bag. Do not discard any parts or material until the unit is assembled.

WARNING: Before doing any assembly or maintenance to the mower, remove the wire from the spark plug.

NOTE: Torque is measured in foot pounds (metric N.m). This measurement describes how tight a nut or bolt must be. The torque is measured with a torque wrench.

TOOLS REQUIRED

1Pliers

2Adjustable open end wrenches

1Blade type screwdriver

1Phillips screwdriver

PARTS BAG - CONTENTS

The fasteners and other loose parts are shown below. The fasteners are shown at full size.

NOTE: Your model will not use every fastener shown on this page.

	Top	Bottom
9x10		15x68
Bolt		Nut, Flange
		43956
1x111		Guide, Rope
1x111
Bolt
3x136
Screw
		17x37
1x121		Lockwasher
Bolt
	Flange Nut
Locknut	15x84
Locknut
15x116

671914	1101352	845
Spacer	Fastener, Cable	Washer

F-050401L

Image 11

Contents Models MURRAY, INC. One Year Limited Warranty Responsibility of the Owner OWNER’S InformationSafe Operation Practices for Walk-Behind Mowers Do not Use only original equipment or authorized replacement partsRead this Instruction Book. Read Safe Mowing GuideTices. Read the next few pages carefully They can help you learn. Too often the mowBruises, or even put out an eye. Often the per Make the clean up after mowing easierAdjustment,except carburetor, while the en Accessory and the mowerMower. If you plan to service the unit yourself Stitutions as service parts. If you need profesSional service, select a shop that is an Authorized Service Center for your brandCause. Vibration is generally a warning Ufacturer’s recommended replacement partBefore using the grass catcher again When the front of the mower has come upAfter Mowing Steps to Follow Before MowingWhile Mowing Parts BAG Contents AssemblyNut Is not installed correctlyUnpacking Instructions Tight BoltModels With HOW to Assemble the Controls to the HandleRope Guide Engine StopCable Engine Stop Cable Recoil-Start Grip LocknutHub Cap Flange Nut 15x68 HOW to Assemble the Wheels with Axle BoltsHOW to Prepare the Engine Final AssemblyEngine Stop Lever HOW to Stop the EngineHOW to Start Engine OperationHOW to Adjust Height of CUT MaintenanceEngine Maintenance HOW to Clean Mower HousingHOW to Sharpen the Blade Blade ServiceHOW to Remove the Blade Check the Level of CUT HOW to Prepare the Mower for StorageEngine will not start Trouble Shooting ChartRepair Parts Mower Housing Loose Parts Hardware Bag DescriptionKEY Description Handle Briggs & Stratton ModelsHandle Tecumseh Models Wheel Size & Type Wheels and Tires050401L MURRAY, INC. Lawn Mower Central Parts Distributors HOW to Order Repair Parts