Murray 20-inch Push manual Steps to Follow Before Mowing, While Mowing, After Mowing

Page 10

STEPS TO FOLLOW

BEFORE MOWING

DBe sure to dress correctly. Wear hard shoes, not sandals or tennis shoes.

DExamine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory replacement blade.

DFill the fuel tank outside. Clean off spilled fuel.

DRead and follow the Owner’s Manual, the instructions with the engine, and the instructions with any attachments. Owner’s Manual instructions are for your safety and the safety of others.

DExhaust fumes are dangerous. Start the engine outside.

DMake sure all safety devices are in place and working correctly.

DOperation of the mower is only for a person that has experience.

DWet grass can be dangerous. Let the grass dry.

DInstruct children and others to keep away from the work area.

DNever cut the grass without good light.

DPick up loose objects. Remove them from the mowing area.

WHILE MOWING

DWatch for fixed objects and avoid them. They can damage the mower or cause injury.

DA hot engine and muffler will cause a burn. Do not touch.

DInclines and slopes must be carefully mowed. See the “Guide” in the back of this book to check a slope.

DLack of daylight or good artificial light is cause to stop mowing.

DExamine the mower, the blade, and other parts for damage after hitting a foreign object or if the unit vibrates excessively.

DDo not make adjustments or repairs without stopping the engine (except for carburetor). Dis- connect the spark plug wire.

DOn or near roads, watch out for traffic. Direct discharge away from roads.

DWhen mowing, avoid areas where traction is unsure. Before and while moving backwards, look behind and down for small children.

DIn heavy grass, raise the cutting height. Cut slower. Stop the engine to remove clogged grass from the mower.

DNever remove any safety related parts.

DDo not pour gasoline into a engine that is hot or running.

AFTER MOWING

DAlways let the mower cool before storing in an enclosed area.

DForeign material on the mower is dangerous. Clean off grass, leaves, grease and oil before storing.

DTighten all loose nuts, bolts and screws before you use the unit.

DEmpty and clean any grass catcher or other accessory.

DRemove the key or disconnect the spark plug wire to prevent unauthorized use.

DMake sure the mower is not kept near a source of ignition. Gas fumes can cause an explosion.

DOnly original parts or factory approved substitutes can be used to service the mower.

DWhen storing the mower for an extended period, remove the fuel from the fuel tank.

DInstruct children to leave the mower alone. It is not a toy.

DNever keep gasoline near a source of ignition. Always use an approved container. Keep gasoline away from children.

DLubricate according to the Instruction Book. See “Lubrication”.

IMPORTANT--Read the Instruction Book. Keep this book for future use and reference.

WARNING: Look for this symbol to point out important

safety precautions. It means: “Attention! Become Alert! Your Safety Is Involved.”

F-050401L

10

Image 10
Contents Models MURRAY, INC. One Year Limited Warranty OWNER’S Information Responsibility of the OwnerSafe Operation Practices for Walk-Behind Mowers Use only original equipment or authorized replacement parts Do notThey can help you learn. Too often the mow Safe Mowing GuideTices. Read the next few pages carefully Read this Instruction Book. ReadAccessory and the mower Make the clean up after mowing easierAdjustment,except carburetor, while the en Bruises, or even put out an eye. Often the perAuthorized Service Center for your brand Stitutions as service parts. If you need profesSional service, select a shop that is an Mower. If you plan to service the unit yourselfWhen the front of the mower has come up Ufacturer’s recommended replacement partBefore using the grass catcher again Cause. Vibration is generally a warningWhile Mowing Steps to Follow Before MowingAfter Mowing Assembly Parts BAG ContentsTight Bolt Is not installed correctlyUnpacking Instructions NutHOW to Assemble the Controls to the Handle Models WithEngine Stop Cable Recoil-Start Grip Locknut Engine StopCable Rope GuideFinal Assembly HOW to Assemble the Wheels with Axle BoltsHOW to Prepare the Engine Hub Cap Flange Nut 15x68Operation HOW to Stop the EngineHOW to Start Engine Engine Stop LeverHOW to Clean Mower Housing MaintenanceEngine Maintenance HOW to Adjust Height of CUTHOW to Remove the Blade Blade ServiceHOW to Sharpen the Blade HOW to Prepare the Mower for Storage Check the Level of CUTTrouble Shooting Chart Engine will not startRepair Parts Mower Housing Description Loose Parts Hardware BagHandle Briggs & Stratton Models KEY DescriptionHandle Tecumseh Models Wheels and Tires Wheel Size & Type050401L HOW to Order Repair Parts MURRAY, INC. Lawn Mower Central Parts Distributors