Toro 14AQ81RP744, 14AK81RK744 Hydrostatic Transmission, Cleaning the Engine And Deck, Fuel Filter

Page 24

•Check the gap using a feeler gauge and adjust, if necessary, by carefully bending the ground electrode. See Figure 15. Set the spark plug gap to

.76 mm (0.030 in.).

Feeler Gauge

Spark Plug

Ground Electrode

Gap

Figure 15

•Reinstall the spark plug into the cylinder head. Torque the spark plug to 28/32 ft. lb.

•Place the spark plug wire boot over the spark plug and press until you feel it “click” in place.

Fuel Filter

WARNING: Do not replace the fuel filter when engine is hot.

The engine is equipped with an inline fuel filter located on the right side of the engine.

Visually inspect the filter periodically for a build-up of residue inside the filter body, and for a dirty element which can be indicated by discoloration. Replace the fuel filter when dirty.

Hydrostatic Transmission

Keep the area around the transmission cooling fan free of grass and debris at all times. The transmission is sealed at the factory and is maintenance free. The fluid level cannot be checked and cannot be changed.

Cleaning the Engine And Deck

Any fuel or oil spilled on the machine should be wiped off promptly.

Do NOT allow debris to accumulate around the cooling fins of the engine or on any other part of the machine, especially the belts and pulleys.

Deck Wash System (Model GT2300 Only)

Your tractor’s deck is equipped with a water port on its surface as part of its deck wash system.

Use the deck wash system to rinse grass clippings from the deck’s underside and prevent the buildup of corrosive chemicals. Complete the following steps

AFTER EACH MOWING:

1.Drive the tractor to a level, clear spot on your lawn, near enough for your garden hose to reach.

IMPORTANT: Make certain the tractor’s discharge chute is directed AWAY from your house, garage, parked cars, etc.

2.Disengage the PTO (Blade Engage), set the parking brake and stop the engine.

3.Thread the hose coupler (packaged with your tractor’s Operator’s Manual) onto the end of your garden hose.

4.Attach the hose coupler to the water port on your decks surface. See Figure 16.

Hose Coupler

Water Port

Figure 16

5.Turn the water on.

6.While sitting in the operator’s position on the tractor, start the engine and place the throttle lever in the FAST (rabbit) position.

7.Move the tractor’s PTO (Blade Engage) into the ON position.

8.Remain in the operator’s position with the cutting deck engaged for a minimum of two minutes, allowing the underside of the cutting deck to thoroughly rinse.

9.Move the tractor’s PTO (Blade Engage) into the OFF position.

10.Turn the ignition key to the STOP position to turn the tractor’s engine off.

11.Turn the water off and detach the hose coupler from the water port on your deck’s surface.

12.Repeat step 4- step 11 on the opposite side of the cutting deck.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents GT2200 & GT2300 Garden Tractors Table of Contents Important Safe Operation Practices General OperationSlope Operation Children General Service Safety Labels Keep Hands and Feet Away from Rotating PartsInstructional Labels Slope Gauge —Attaching the Battery Cables Gas and Oil Fill-upAttaching The Steering Wheel Tools RequiredShipping Brace Removal Tire PressureGauge Wheels Know Your Garden Tractor Ignition Switch Module Throttle ControlChoke Control Drive PedalElectric PTO Blade Engage Knob Cruise Control LeverParking Brake Lever Safety Interlock System Reverse Caution ModeOperating Your Garden Tractor Using the Deck Lift Lever Starting the EngineStopping the Engine Driving The TractorSetting The Cruise Control Driving On SlopesEngaging the Parking Brake Moving The Tractor ManuallyEngaging the PTO Blades MowingMaking Adjustments Seat AdjustmentLeveling the Deck Front To RearParking Brake Adjustment Steering AdjustmentMaintaining Your Garden Tractor EngineEngine Oil Checking the Oil LevelChanging the Engine Oil Draining the OilChanging the Oil Filter Re-filling the Crankcase with OilPrecleaner Service Paper ElementAir Filter Spark PlugsCleaning the Engine And Deck Hydrostatic TransmissionFuel Filter Lubrication EngineFront Wheels Pivot Points & LinkageService TiresFuse Cutting BladesBattery Cutting Deck RemovalJump Starting ChargingChanging the Deck Belt Electric PTO Clutch OFF-SEASON Storage Maintenance Chart Troubleshooting Trouble Possible Causes Corrective ActionSpecifications Hydrostatic TransmissionPage MANUFACTURER’S Warranty Coverage Toro Company

14AK81RK744, 14AQ81RP744 specifications

The Toro 14AQ81RP744 and 14AK81RK744 are both exceptional lawn care machines designed to make maintaining your lawn easy and efficient. These models are well-regarded in the industry for their advanced features, durability, and user-friendly design.

The Toro 14AQ81RP744 is a powerful self-propelled lawn mower that boasts a 21-inch cutting deck, allowing it to cover considerable ground in minimal time. Equipped with a reliable OHV engine, it ensures efficient fuel combustion and impressive power, enabling it to tackle various grass types and conditions with ease. This model features a Personal Pace system, which automatically adjusts the mower's speed to match the operator's walking pace, providing an effortless mowing experience. Furthermore, the 14AQ81RP744 is equipped with a 3-in-1 cutting system, allowing users to choose between mulching, bagging, or side discharge.

Meanwhile, the Toro 14AK81RK744 model stands out with its innovative Recycler cutting technology. This feature finely shreds clippings, allowing them to decompose and return nutrients to the soil, ultimately promoting a healthier lawn. The 14AK81RK744 also sports a similarly robust engine and a 21-inch cutting width, making it perfect for both residential and commercial properties needing a dependable solution for lawn maintenance. Its lightweight design and folding handles make it a convenient choice for storage and transport.

Both models highlight Toro's commitment to user comfort and safety. The ergonomic handles ensure a comfortable grip during operation, while the adjustable cutting height feature enables users to customize their mow according to the specific needs of their lawn. Each mower is designed with an easy-start system, reducing the hassle of starting the engine.

In terms of technology, both Toro models excel in fuel efficiency and low emissions, aligning with modern environmental standards. The durable construction of these mowers ensures they can withstand the rigors of regular use, while also maintaining reliable performance over time.

In conclusion, the Toro 14AQ81RP744 and 14AK81RK744 are prime examples of efficient and effective lawn care solutions. With their powerful performance, advanced features, and thoughtful design, they are ideal for any homeowner or professional landscaper looking to achieve a beautifully maintained lawn.
Top Page Image Contents