Makita G2800R, G6101R, G4101R G6100R, G4100R manual Safety Precautions, － 1－

Page 11

1. SAFETY PRECAUTIONS

Do not operate the generator near gasoline or gaseous fuel because of the potential danger of explosion or fire.

Do not fill the fuel tank with fuel while the engine is running. Do not smoke or use open flame near the fuel tank. Be careful not to spill fuel during refueling. If fuel is spilt, wipe it off and let dry before starting the engine.

Do not place in flammables near the generator.

Be careful not to place fuel, matches, gunpowder, oily cloths, straw, trash, or any other in flammables near the generator.

Do not operate the generator inside a room, cave, tunnel, or other insufficient- ly ventilated area. Always operate it in a well-ventilated area, otherwise the engine may become overheated, and the poisonous carbon monoxide gas contained in the exhaust gases will endanger human lives. Keep the,genera- tor at least 1 meter (3 feet) away from any structure or building during use.

If the generator must be used indoors, the area must be well-ventilated and extreme caution must be taken regarding the discharge of exhaust gases.

Do not enclose the generator nor cover it with a box.

The generator has a built-in forced air cooling system, and may become over- heated if it is enclosed. If generator has been covered to protect it from the weather during non use, be sure to remove it and keep it well away from the area during generator use.

Operate the generator on a level surface.

It is not necessary to prepare a special foundation for the generator. However, the generator will vibrate on an irregular surface, so choose a level place without surface irregularities.

If the generator is tilted or moved during operation, fuel may spill and / or the generator may tip over, causing a hazardous situation.

Proper lubrication cannot be expected if the generator is operated on a steep incline or slope. In such a case, piston seizure may occur even if the oil is above the upper level.

－ 1－

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Generator AIR Index What is not Covered Federal Emissions Component Defect WarrantyEmission Component Defect Warranty Period Obtaining Warranty ServiceHOW to Make a Claim Owners Warranty ResponsibilitiesManufacturers Warranty Coverage California Emission Control Warranty StatementYour Warranty Rights and Obligations EMISSION-RELATED Parts Covered Under this Warranty Limited WarrantyWarranty Period What is Covered Under this WarrantyMaintenance Schedule What is not Covered Under this WarrantyHOW to File a Warranty Claim Where to GET Warranty Services Repair and Replacement of EMISSION-RELATED PartsForeword Contents － 1－ Safety Precautions－ 2－ － 3－ Model Specifications－ 4－ － 5 － Components－ 6－ PRE-OPERATION ChecksCheck Engine OIL － 7－ Check Engine Fuel－ 8－ Checking Component PartsCheck Generator Surroundings － 9－ Battery Installtion Electric starter modelRED Cable Black Cable－ 10－ Grounding Generator－ 11－ Operating ProceduresStarting the Engine － 12－ ［Electric starter model］－ 13－ Using Electric Power－ 14－ G4101R / G4100R－ 15－ AC ApplicationStyle Ampere Receptacle AC plug Description － 16－－ 17－ Full Power SwitchGfci Receptacle － 18－ Connecting to Domestic Circuits House Wiring－ 19－ － 20－ Safety Precautions While ChargingDC Application Connection of Cable－ 21－ Stopping the GeneratorOIL Sensor Stopping the Engine HOW to USE Idle ControlIdle Control Except G2800R Checking the Operation－ 23－ Wattage Information－ 24－ Extension Cord ChartVoltage Drop in Electric Extension Cords － 25－ Spark ArresterSpark Arrester － 26－ Maintenance SchedulePeriodic Maintenance Daily Inspection－ 27－ Periodic Maintenance Schedule table－ 28－ HOW-TO MaintenanceCleaning AIR Cleaner Engine OIL ChangeNGK BR6HS Cleaning and Adjusting Spark PlugElectrode GAP － 29－－ 30－ Cleaning Fuel StrainerFuel Hose Replacement － 31－ Preparation for Storage－ 32－ Troubleshooting－ 33－ DiagramG2800R － 34－ G4100R－ 35－ G4101R－ 36－ G6100R－ 37－ G6101R－ 38－ HOW to Install BatteryOptional Parts Makita Corporation
Related manuals
Manual 47 pages 32.53 Kb

G2800R, G4101R G6100R, G4100R, G6101R specifications

Makita has long been a trusted name in the power tools industry, known for its commitment to quality, innovation, and performance. Among its extensive lineup, the Makita G Series stands out with models such as the G6101R, G6100R, G4100R, and G4101R. These tools are designed to meet the demands of both professionals and DIY enthusiasts, offering exceptional power, reliability, and ease of use.

The Makita G6101R and G6100R models are equipped with robust motors that provide ample power for a variety of applications, whether cutting, grinding, or polishing. These tools boast a durable construction, which enhances their longevity and consistently delivers dependable performance even under tough working conditions. Advanced ergonomic designs ensure that operators experience reduced fatigue during extended use, making them ideal for heavy-duty tasks.

The G4100R and G4101R models are similarly built for efficiency and ease of use, featuring lightweight designs that allow for better maneuverability. These tools come with a host of safety features, including protective covers and safety switches, effectively minimizing the risk of accidents in the workplace. The G Series models also incorporate advanced cooling systems that prevent overheating, thus prolonging the life of the tool and ensuring consistent performance.

One significant technological advancement across the G Series is the inclusion of variable speed settings. This feature allows users to tailor the tool's performance according to the specific requirements of the task at hand. Whether you need high speed for aggressive cutting or lower speed for delicate tasks, these models provide the versatility to adapt to various applications seamlessly.

Moreover, the G Series tools utilize high-quality components that deliver reliable torque and power. The powerful motors paired with precision-engineered gears ensure optimal performance and efficiency, making them perfect for a range of materials, from metal to wood.

In summary, the Makita G6101R, G6100R, G4100R, and G4101R models represent a blend of innovation, safety, and efficiency. With their powerful motors, ergonomic designs, safety features, and variable speed controls, these tools are built to exceed the expectations of users, making them an invaluable addition to any toolbox. Whether for professional or personal use, the Makita G Series stands as a testament to quality craftsmanship and advanced technology.
Top Page Image Contents