Makita Understanding Generator Idle Control and Troubleshooting for Models
Page 32

IDLE CONTROL (Except G2800R)

IDLE CONTROL automatically reduces engine speed when load is OFF, and auto- matically increases engine speed to rated r.p.m. when load is ON.

IDLE CONTROL provides fuel economy and low noise operation at no-load run- ning.

(1) HOW TO USE IDLE CONTROL

■Start the engine with IDLE CONTROL

SWITCH off.

NOTE :

Warm up the engine without a load for a few minutes.

■Turn IDLE CONTROL SWITCH on.

(2) CHECKING THE OPERATION

When IDLE CONTROL does not operate normally, please check following :

■Overloaded ?

Please make it sure that the generator is not overload.

NOTE :

Most induction loads such as electric motors require three to five times more wattage than their ratings during starting.

This starting wattage should not exceed the rated output of the generator for proper operation of IDLE CONTROL.

■Turn IDLE CONTROL SWITCH off when the IDLE CONTROL does not work normally under the rated output.

NOTE :

The IDLE CONTROL may not operate when the applied load is under 40W. In such cases turn the IDLE CONTROL SWITCH off.

(3) STOPPING THE ENGINE

■Turn off the switch of load.

■Switch off generator's AC breaker.

■Disconnect tool or appliance.

■Turn the IDLE CONTROL SWITCH off.

■Turn the STOP SWITCH to the position "O" (OFF).

NOTE :

Allow the engine about 3 minutes to cool down at no-load before stopping.

－ 22－

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Generator AIR Index Federal Emissions Component Defect Warranty Emission Component Defect Warranty PeriodObtaining Warranty Service What is not CoveredOwners Warranty Responsibilities HOW to Make a ClaimManufacturers Warranty Coverage California Emission Control Warranty StatementYour Warranty Rights and Obligations Limited Warranty Warranty PeriodWhat is Covered Under this Warranty EMISSION-RELATED Parts Covered Under this WarrantyWhat is not Covered Under this Warranty Maintenance ScheduleRepair and Replacement of EMISSION-RELATED Parts HOW to File a Warranty Claim Where to GET Warranty ServicesForeword Contents Safety Precautions － 1－－ 2－ － 3－ Model Specifications－ 4－ Components － 5 －－ 6－ PRE-OPERATION ChecksCheck Engine OIL Check Engine Fuel － 7－－ 8－ Checking Component PartsCheck Generator Surroundings Battery Installtion Electric starter model RED CableBlack Cable － 9－Grounding Generator － 10－－ 11－ Operating ProceduresStarting the Engine ［Electric starter model］ － 12－Using Electric Power － 13－G4101R / G4100R － 14－AC Application － 15－－ 16－ Style Ampere Receptacle AC plug Description－ 17－ Full Power SwitchGfci Receptacle Connecting to Domestic Circuits House Wiring － 18－ － 19－ Safety Precautions While Charging DC ApplicationConnection of Cable － 20－－ 21－ Stopping the GeneratorOIL Sensor HOW to USE Idle Control Idle Control Except G2800RChecking the Operation Stopping the EngineWattage Information － 23－－ 24－ Extension Cord ChartVoltage Drop in Electric Extension Cords － 25－ Spark ArresterSpark Arrester Maintenance Schedule Periodic MaintenanceDaily Inspection － 26－Periodic Maintenance Schedule table － 27－HOW-TO Maintenance Cleaning AIR CleanerEngine OIL Change － 28－Cleaning and Adjusting Spark Plug Electrode GAP－ 29－ NGK BR6HS－ 30－ Cleaning Fuel StrainerFuel Hose Replacement Preparation for Storage － 31－Troubleshooting － 32－－ 33－ DiagramG2800R G4100R － 34－G4101R － 35－G6100R － 36－G6101R － 37－－ 38－ HOW to Install BatteryOptional Parts Makita Corporation
Related manuals
Manual 47 pages 32.53 Kb

G2800R, G4101R G6100R, G4100R, G6101R specifications

Makita has long been a trusted name in the power tools industry, known for its commitment to quality, innovation, and performance. Among its extensive lineup, the Makita G Series stands out with models such as the G6101R, G6100R, G4100R, and G4101R. These tools are designed to meet the demands of both professionals and DIY enthusiasts, offering exceptional power, reliability, and ease of use.

The Makita G6101R and G6100R models are equipped with robust motors that provide ample power for a variety of applications, whether cutting, grinding, or polishing. These tools boast a durable construction, which enhances their longevity and consistently delivers dependable performance even under tough working conditions. Advanced ergonomic designs ensure that operators experience reduced fatigue during extended use, making them ideal for heavy-duty tasks.

The G4100R and G4101R models are similarly built for efficiency and ease of use, featuring lightweight designs that allow for better maneuverability. These tools come with a host of safety features, including protective covers and safety switches, effectively minimizing the risk of accidents in the workplace. The G Series models also incorporate advanced cooling systems that prevent overheating, thus prolonging the life of the tool and ensuring consistent performance.

One significant technological advancement across the G Series is the inclusion of variable speed settings. This feature allows users to tailor the tool's performance according to the specific requirements of the task at hand. Whether you need high speed for aggressive cutting or lower speed for delicate tasks, these models provide the versatility to adapt to various applications seamlessly.

Moreover, the G Series tools utilize high-quality components that deliver reliable torque and power. The powerful motors paired with precision-engineered gears ensure optimal performance and efficiency, making them perfect for a range of materials, from metal to wood.

In summary, the Makita G6101R, G6100R, G4100R, and G4101R models represent a blend of innovation, safety, and efficiency. With their powerful motors, ergonomic designs, safety features, and variable speed controls, these tools are built to exceed the expectations of users, making them an invaluable addition to any toolbox. Whether for professional or personal use, the Makita G Series stands as a testament to quality craftsmanship and advanced technology.
Top Page Image Contents