Makita G4100R, G6101R, G4101R G6100R, G2800R manual Troubleshooting, － 32－

Page 42

11. TROUBLESHOOTING

When generator engine fails to start after several attempts, or if no electricity is available at the output socket, check the following chart. If your generator still fails to start or generate electricity, contact your nearest Makita factory or authorized service center for further information or corrective procedures.

When Engine Fails to Start :

Check if choke lever is in its proper position.

Check if fuel cock is open.

Check fuel level.

Check if engine switch is in OFF.

Check to make sure generator is not connected to an appliance.

Check spark plug for loose spark plug cap.

Set the choke lever to "CLOSE" posi- tion.

If closed, open fuel cock.

If empty, refill fuel tank making sure not to overfill.

Turn engine switch to ON.

If connected, turn off the power switch on the connected appliance and unplug.

If loose, push spark plug cap back into place.

Check spark plug for contamination.

Remove spark plug and clean electrode.

When No Electricity Is Generated at Receptacle :

Check to make sure no-fuse breaker is in the "ON" position.

Check AC and DC terminals for loose connection.

Check to see if engine starting was attempted with appliances already con- nected to generator.

After making sure that the total wattage of the electrical appliance is within per- missible limits and there are no defects in the appliance, turn the no-fuse break- er to the "ON" position.

If breakers continue to actuate, consult your nearest servicing dealer.

Secure connection if necessary.

Turn off switch on the appliance, and disconnect cable from receptacle. Reconnect after generator has been started properly.

－ 32－

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Generator AIR Index Obtaining Warranty Service Federal Emissions Component Defect WarrantyEmission Component Defect Warranty Period What is not CoveredOwners Warranty Responsibilities HOW to Make a ClaimCalifornia Emission Control Warranty Statement Your Warranty Rights and ObligationsManufacturers Warranty Coverage What is Covered Under this Warranty Limited WarrantyWarranty Period EMISSION-RELATED Parts Covered Under this WarrantyWhat is not Covered Under this Warranty Maintenance ScheduleRepair and Replacement of EMISSION-RELATED Parts HOW to File a Warranty Claim Where to GET Warranty ServicesForeword Contents Safety Precautions － 1－－ 2－ － 3－ Specifications － 4－Model Components － 5 －PRE-OPERATION Checks Check Engine OIL－ 6－ Check Engine Fuel － 7－Checking Component Parts Check Generator Surroundings－ 8－ Black Cable Battery Installtion Electric starter modelRED Cable － 9－Grounding Generator － 10－Operating Procedures Starting the Engine－ 11－ ［Electric starter model］ － 12－Using Electric Power － 13－G4101R / G4100R － 14－AC Application － 15－－ 16－ Style Ampere Receptacle AC plug DescriptionFull Power Switch Gfci Receptacle－ 17－ Connecting to Domestic Circuits House Wiring － 18－－ 19－ Connection of Cable Safety Precautions While ChargingDC Application － 20－Stopping the Generator OIL Sensor－ 21－ Checking the Operation HOW to USE Idle ControlIdle Control Except G2800R Stopping the EngineWattage Information － 23－Extension Cord Chart Voltage Drop in Electric Extension Cords－ 24－ Spark Arrester Spark Arrester－ 25－ Daily Inspection Maintenance SchedulePeriodic Maintenance － 26－Periodic Maintenance Schedule table － 27－Engine OIL Change HOW-TO MaintenanceCleaning AIR Cleaner － 28－－ 29－ Cleaning and Adjusting Spark PlugElectrode GAP NGK BR6HSCleaning Fuel Strainer Fuel Hose Replacement－ 30－ Preparation for Storage － 31－Troubleshooting － 32－Diagram G2800R－ 33－ G4100R － 34－G4101R － 35－G6100R － 36－G6101R － 37－HOW to Install Battery Optional Parts－ 38－ Makita Corporation
Related manuals
Manual 47 pages 32.53 Kb

G2800R, G4101R G6100R, G4100R, G6101R specifications

Makita has long been a trusted name in the power tools industry, known for its commitment to quality, innovation, and performance. Among its extensive lineup, the Makita G Series stands out with models such as the G6101R, G6100R, G4100R, and G4101R. These tools are designed to meet the demands of both professionals and DIY enthusiasts, offering exceptional power, reliability, and ease of use.

The Makita G6101R and G6100R models are equipped with robust motors that provide ample power for a variety of applications, whether cutting, grinding, or polishing. These tools boast a durable construction, which enhances their longevity and consistently delivers dependable performance even under tough working conditions. Advanced ergonomic designs ensure that operators experience reduced fatigue during extended use, making them ideal for heavy-duty tasks.

The G4100R and G4101R models are similarly built for efficiency and ease of use, featuring lightweight designs that allow for better maneuverability. These tools come with a host of safety features, including protective covers and safety switches, effectively minimizing the risk of accidents in the workplace. The G Series models also incorporate advanced cooling systems that prevent overheating, thus prolonging the life of the tool and ensuring consistent performance.

One significant technological advancement across the G Series is the inclusion of variable speed settings. This feature allows users to tailor the tool's performance according to the specific requirements of the task at hand. Whether you need high speed for aggressive cutting or lower speed for delicate tasks, these models provide the versatility to adapt to various applications seamlessly.

Moreover, the G Series tools utilize high-quality components that deliver reliable torque and power. The powerful motors paired with precision-engineered gears ensure optimal performance and efficiency, making them perfect for a range of materials, from metal to wood.

In summary, the Makita G6101R, G6100R, G4100R, and G4101R models represent a blend of innovation, safety, and efficiency. With their powerful motors, ergonomic designs, safety features, and variable speed controls, these tools are built to exceed the expectations of users, making them an invaluable addition to any toolbox. Whether for professional or personal use, the Makita G Series stands as a testament to quality craftsmanship and advanced technology.
Top Page Image Contents