Makita G4101R G6100R, G6101R, G4100R, G2800R manual Wattage Information, - 23-

Page 33

6. WATTAGE INFORMATION

Some appliances need a "surge" of energy when starting.

This means that the amount of electrical power needed to start the appliance may exceed the amount needed to maintain its use.

Electrical appliances and tools normally come with a label indicating voltage, cycles / Hz, amperage (amps) and electrical power needed to run the appliance or tool.

Check with your nearest dealer or service center with questions regarding power surge of certain appliances or power tools.

Electrical loads such as incandescent lamps and hot plates require the same wattage to start as is needed to maintain use.

Loads such as fluorescent lamps require 1.2 to 2 times the indicated wattage during start-up.

Loads for mercury lamps require 2 to 3 times the indicated wattage during start-up.

Electrical motors require a large starting current. Power requirements depend on the type of motor and its use. Once enough "surge" is attained to start the motor,

the appliance will require only 50% to 30% of the wattage to continue running.

Most electrical tools require 1.2 to 3 times their wattage for running under load during use. For example, a 5,000 watt generator can power a 1800 to 4000 watt electrical tool.

Loads such as submersible pumps and air compressors require a very large force to start. They need 3 to 5 times the normal running wattage in order to start.

For example, a 5,000 watt generator would only be able to drive a 1,000 to 1,700 watt pump.

NOTE :

The following wattage chart is general guide only. Refer to your specific appliance for cor- rect wattage.

To determine the total wattage required to run a particular electrical appliance or tool, mul- tiply the voltage figure of the appliance/tool by the amperage (amps) figure of same. The voltage and amperage (amps) information can be found on a name plate which is normally attached to electrical appliances and tools.

 

 

Applicable Wattage (W)

 

 

 

 

 

Applications

G2800R

 

G4100R,G4101R

G6100R,G6101R

 

 

 

 

 

 

60Hz

 

60Hz

60Hz

 

 

 

 

 

Incandescent lamp, Heater

2300

 

3600

4800

 

 

 

 

 

Fluorescent lamp, Electric tool

1200

 

1800

2400

 

 

 

 

 

Mercury lamp

800

 

1400

1600

 

 

 

 

 

Pump, Compressor

550

 

850

1100

 

 

 

 

 

23

Image 33
Contents Generator AIR Index Emission Component Defect Warranty Period Federal Emissions Component Defect WarrantyObtaining Warranty Service What is not CoveredHOW to Make a Claim Owners Warranty ResponsibilitiesCalifornia Emission Control Warranty Statement Your Warranty Rights and ObligationsManufacturers Warranty Coverage Warranty Period Limited WarrantyWhat is Covered Under this Warranty EMISSION-RELATED Parts Covered Under this WarrantyMaintenance Schedule What is not Covered Under this WarrantyHOW to File a Warranty Claim Where to GET Warranty Services Repair and Replacement of EMISSION-RELATED PartsForeword Contents - 1- Safety Precautions- 2- - 3- Specifications - 4-Model - 5 - ComponentsPRE-OPERATION Checks Check Engine OIL- 6- - 7- Check Engine FuelChecking Component Parts Check Generator Surroundings- 8- RED Cable Battery Installtion Electric starter modelBlack Cable - 9-- 10- Grounding GeneratorOperating Procedures Starting the Engine- 11- - 12- [Electric starter model]- 13- Using Electric Power- 14- G4101R / G4100R- 15- AC ApplicationStyle Ampere Receptacle AC plug Description - 16-Full Power Switch Gfci Receptacle- 17- - 18- Connecting to Domestic Circuits House Wiring- 19- DC Application Safety Precautions While ChargingConnection of Cable - 20-Stopping the Generator OIL Sensor- 21- Idle Control Except G2800R HOW to USE Idle ControlChecking the Operation Stopping the Engine- 23- Wattage InformationExtension Cord Chart Voltage Drop in Electric Extension Cords- 24- Spark Arrester Spark Arrester- 25- Periodic Maintenance Maintenance ScheduleDaily Inspection - 26-- 27- Periodic Maintenance Schedule tableCleaning AIR Cleaner HOW-TO MaintenanceEngine OIL Change - 28-Electrode GAP Cleaning and Adjusting Spark Plug- 29- NGK BR6HSCleaning Fuel Strainer Fuel Hose Replacement- 30- - 31- Preparation for Storage- 32- TroubleshootingDiagram G2800R- 33- - 34- G4100R- 35- G4101R- 36- G6100R- 37- G6101RHOW to Install Battery Optional Parts- 38- Makita Corporation
Related manuals
Manual 47 pages 32.53 Kb

G2800R, G4101R G6100R, G4100R, G6101R specifications

Makita has long been a trusted name in the power tools industry, known for its commitment to quality, innovation, and performance. Among its extensive lineup, the Makita G Series stands out with models such as the G6101R, G6100R, G4100R, and G4101R. These tools are designed to meet the demands of both professionals and DIY enthusiasts, offering exceptional power, reliability, and ease of use.

The Makita G6101R and G6100R models are equipped with robust motors that provide ample power for a variety of applications, whether cutting, grinding, or polishing. These tools boast a durable construction, which enhances their longevity and consistently delivers dependable performance even under tough working conditions. Advanced ergonomic designs ensure that operators experience reduced fatigue during extended use, making them ideal for heavy-duty tasks.

The G4100R and G4101R models are similarly built for efficiency and ease of use, featuring lightweight designs that allow for better maneuverability. These tools come with a host of safety features, including protective covers and safety switches, effectively minimizing the risk of accidents in the workplace. The G Series models also incorporate advanced cooling systems that prevent overheating, thus prolonging the life of the tool and ensuring consistent performance.

One significant technological advancement across the G Series is the inclusion of variable speed settings. This feature allows users to tailor the tool's performance according to the specific requirements of the task at hand. Whether you need high speed for aggressive cutting or lower speed for delicate tasks, these models provide the versatility to adapt to various applications seamlessly.

Moreover, the G Series tools utilize high-quality components that deliver reliable torque and power. The powerful motors paired with precision-engineered gears ensure optimal performance and efficiency, making them perfect for a range of materials, from metal to wood.

In summary, the Makita G6101R, G6100R, G4100R, and G4101R models represent a blend of innovation, safety, and efficiency. With their powerful motors, ergonomic designs, safety features, and variable speed controls, these tools are built to exceed the expectations of users, making them an invaluable addition to any toolbox. Whether for professional or personal use, the Makita G Series stands as a testament to quality craftsmanship and advanced technology.