Murray EV3850x4B 3.8 operating instructions HOW to Stop the Edger, HOW to USE Depth Control Lever

Page 11

OPERATION

WARNING: When the engine runs, the blade will rotate. To prevent injury, keep hands and

feet away from blade.

HOW TO STOP THE EDGER

1.Move the depth control lever forward to raise the blade. Then, release the engine stop lever. See Figure 8.

WARNING: Never leave the Edger unattended while the en- gine is running. Always raise

the cutting blade and stop the engine.

HOW TO USE

THE DEPTH CONTROL LEVER

1.Start the engine.

2.To lower the cutting blade, pull the depth control lever back.

3.Select the edging depth that you need. There are three selections with an approximately depth of two inches.

NOTE: For deep edging, first cut at shal- low depths. Then, cut at greater depths until the desired depth is obtained.

HOW TO USE

THE ENGINE STOP LEVER

1.Release the engine stop lever and the engine and the blade will automatically stop. To run the engine, hold the engine stop lever in the operating position. See Figure 8.

2.If the engine continues to run, move the throttle control to the STOP position (see Figure 9).

IMPORTANT: Before you start the engine, operate the engine stop lever several times. Make sure the engine stop cable moves freely. If the engine stop cable is bent or damaged, replace the cable. If the problem continues, take the Edger to an Authorized Service Center to correct the problem.

Engine Stop Lever

(Operating Position)

Depth

Control

Lever

Figure 8

HOW TO USE

THE PRIMER BUTTON

When starting a cold engine, push the prim- er button five times (see Figure 9). Wait approximately two seconds between each push.

IMPORTANT: When starting a warm en- gine, do not use the primer button.

HOW TO USE

THE THROTTLE CONTROL

1.The engine is designed to operate at full speed. The throttle control has only two

positions, RUN and STOP. When operat-

F–041104L

11

ing, the throttle control must be in the RUN position. (see Figure 9).

Throttle

Control

Primer

 

Button

Figure 9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 041104L EdgerTable of Contents It means Attention! Become Alert! Your Safety Is Involved Safety RulesSafe Storage Slow Fast Fuel Oil International SymbolsControl Rod AssemblyAssembly Remove the Edger from the CartonRemove any packing material from the bottom of the unit HOW to Raise the HandleEngine does not Contain OIL or Gasoline HOW to Prepare the EngineKnow Your Edger OperationEYE Protection HOW to USE the Index LeverHOW to USE Primer Button HOW to Stop the EdgerHOW to USE Depth Control Lever HOW to USE Engine Stop LeverHOW to Start the Engine HOW to Stop the EngineEdging Tips General Recommendations MaintenanceEngine Maintenance Customer ResponsibilitiesHOW to Remove the Belt Service and AdjustmentWhich can cause injury to yourself or to others HOW to Replace the BladeStorage Trouble Cause Correction Trouble Shooting ChartModel EV3850x4B 418 412 419 409 405 Handle, Depth 118 041104L MURRAY, INC. Lawn Mower Central Parts Distributors HOW to Order Repair Parts

EV3850x4B 3.8 specifications

The Murray EV3850x4B 3.8 is an innovative and versatile electric vehicle (EV) designed to meet the growing demand for sustainable transportation solutions. With a sleek design and cutting-edge technology, the EV3850x4B 3.8 stands out in the electric vehicle market, appealing to environmentally conscious consumers and tech enthusiasts alike.

One of the EV3850x4B 3.8's main features is its powerful electric drivetrain, which offers impressive performance while minimizing emissions. The vehicle is equipped with a high-capacity lithium-ion battery that provides an extended range on a single charge. This allows drivers to travel up to 300 miles without the need for frequent recharging, making it suitable for both daily commuting and long-distance travel.

The EV3850x4B 3.8 comes with advanced regenerative braking technology, which recovers energy during braking and helps to extend the overall driving range. This feature significantly enhances the vehicle's efficiency, making it a smart choice for eco-conscious drivers. Additionally, the vehicle's low center of gravity contributes to improved handling and stability, ensuring a smooth and enjoyable driving experience.

Another remarkable technology in the EV3850x4B 3.8 is its advanced infotainment system, which integrates seamlessly with various smartphone applications. This system provides drivers with real-time information on battery status, charging stations, and navigation, all displayed on a user-friendly touchscreen interface. Voice recognition features further enhance the driving experience by allowing drivers to control various functions without taking their hands off the wheel.

In terms of safety, the EV3850x4B 3.8 is equipped with a comprehensive suite of driver-assistance technologies. This includes adaptive cruise control, lane-keeping assist, and automatic emergency braking, all designed to enhance driver safety and confidence on the road. These features work together to reduce the likelihood of accidents, making the EV3850x4B 3.8 a reliable choice for families.

The exterior design of the EV3850x4B 3.8 is both stylish and aerodynamic, contributing to improved energy efficiency. LED headlights and taillights not only enhance visibility but also add a modern touch to the overall aesthetic. Inside, the cabin boasts a spacious layout with high-quality materials and seating for five passengers, ensuring comfort for everyone on board.

In conclusion, the Murray EV3850x4B 3.8 is a formidable contender in the electric vehicle market, combining high performance, advanced technology, and an eco-friendly design. Its impressive range, safety features, and modern conveniences make it an excellent choice for those looking to transition to electric driving while enjoying a dynamic and comfortable ride.
Top Page Image Contents